Top 20 Best 4 Clamps

 

Black Duck Brand Ratchet Bar 4 Clamp Converts to 8 Spreader 8 Ratchet Bar Clamps

Black Duck Brand Ratchet Bar 4″ Clamp, Converts to 8″ Spreader (8 Ratchet Bar Clamps)

Black Duck Brand Ratchet Bar 4″ Clamp, Converts to 8″ Spreader (8 Ratchet Bar Clamps) - Gets the job done smooth triger action & quick release button lets you spend more time on your project. Includes 8 ratchet bar clamp and spreaders. Built to last pick up these ratchet clamps with durable nylon jaw assemblies. Each ratchet bar can clamp up to 4″ and spread up to 8″.

 

Hiltex 00417 4-Inch Metal Spring Clamps with PVC Coated Handle and Tips  4-Piece Set

Hiltex 00417 4-Inch Metal Spring Clamps with PVC Coated Handle and Tips | 4-Piece Set

Hiltex 00417 4-Inch Metal Spring Clamps with PVC Coated Handle and Tips | 4-Piece Set - Strong steel body 4″ long spring clamps with zinc plated, rust-resistant steel body. Wide jaw capacity 1-1/4″ jaw opening for a range of joining, holding and setting applications. Tightly wound center spring tightly wound steel coil in the center of each clamp provides the right amount of tension. Holds strong set of four, 4″ steel spring clamps provides secure clamping power for carpentry, automotive or general purpose use. Protects surfaces pvc-coated tips help protect surfaces from damage.

 

Briggs Stratton 25-Inch Fuel Line with 4 Clamps 5414K

Briggs & Stratton 25-Inch Fuel Line with 4 Clamps 5414K

Briggs & Stratton 25-Inch Fuel Line with 4 Clamps 5414K - Briggs & stratton 5414h 25″ fuel line w/ 4 clamps briggs & stratton 25 inch fuel hose is replacement part with clamp. •replaces briggs & stratton service part #283207 (fuel hose), and #95162s (clamps)•genuine briggs & stratton partweight 0. 2lbs.

 

Bosch RA1171RA1180RA1181 Routing Table 4 Pack Clamp Knob  2610923280-4pk

Bosch RA1171/RA1180/RA1181 Routing Table (4 Pack) Clamp Knob # 2610923280-4pk

Bosch RA1171/RA1180/RA1181 Routing Table (4 Pack) Clamp Knob # 2610923280-4pk - Includes (4), clamp knob # 2610923283 genuine oem replacement part new, oem bulk packed please refer to list below for compatibility bosch ra1171 (2610930908) routing, ra1180 (2610914514) routing, ra1181 (2610927684) routing, ra1190 (2610914650) routing.

 

Steelgrip 2262541 Spring Clamp 4

Steelgrip 2262541 Spring Clamp, 4″

Steelgrip 2262541 Spring Clamp, 4″ - “Steel grip” spring clamp 4″ clamp with 1″ opening strong grip vinyl cushioned tip and handles replaces ace no. 2084648.

 

TerraBloom 4 Inch Duct Flexible Aluminum Ducting 25 feet long with 2 Clamps 4-inch Ducting Ventilation Duct

TerraBloom 4 Inch Duct, Flexible Aluminum Ducting, 25 feet long with 2 Clamps, 4-inch Ducting, Ventilation Duct

TerraBloom 4 Inch Duct, Flexible Aluminum Ducting, 25 feet long with 2 Clamps, 4-inch Ducting, Ventilation Duct - Ducting size 4 inches (diameter) x 25 feet (length) when fully extended. Flexible ventilation ducting made from aluminum. Packaged in a plain carton box. Easy installation with any standard 4″ inline fan using a pair of included 4″ metal clamps. Ducting designed specifically for ventilation purposes.

 

API AC101P4-LDTT150P Mounting Clamps Topper Tape for Truck Caps  Camper Shells Set of 4

API AC101P4-LDTT150P Mounting Clamps & Topper Tape for Truck Caps / Camper Shells (Set of 4)

API AC101P4-LDTT150P Mounting Clamps & Topper Tape for Truck Caps / Camper Shells (Set of 4) - Made in the usa. Complete installation guide. Constructed of tempered aluminum with a mill finish. A = 1″ b = 1 1/2″ c = 0″, 7/8″ (see technical drawing above). Set of 4 clamps & 1 roll of topper tape® designed to mount truck caps on many pick-up truck models.

 

Big Horn 11714PK 4-Inch Right Hand Bridge Clamps 5-Pack

Big Horn 11714PK 4-Inch Right Hand Bridge Clamps, 5-Pack

Big Horn 11714PK 4-Inch Right Hand Bridge Clamps, 5-Pack - As the spiral moves away from you, it turns to the right, or clockwise. Bridge design allows more pressure against the body of the hose. Narrow design positions seals it to the fitting better than wider ones available elsewhere. Right hand spiral design. Key handle allows for tool free tightening.

 

Woodtek 114644 4-pack  Clamps And Vises Bar Pipe Clamps 2-12x36 Joiner Clamp With Pads

Woodtek 114644, 4-pack , Clamps And Vises, Bar & Pipe Clamps, 2-1/2″x36″ Joiner Clamp With Pads

Woodtek 114644, 4-pack , Clamps And Vises, Bar & Pipe Clamps, 2-1/2″x36″ Joiner Clamp With Pads - Malleable cast iron heads, chrome plated steel guide bars and multi-disc clutches give these clamps high priced features at an affordable price guide bar extends full length of head and is securely fastened with a steel rivet. Well suited for assembly and soft wood and hardwood glue-ups. All sizes include non-marring pads to protect work piece. Imported. 2-1/2″ to 5″ throat depth. Clamp heads are flat on the back, allowing them to stand upright while work is assembled. Smooth hardwood handle is firmly pinned to fine thread screw.

 

Sliding Arm Bar Clamp 4 In 3-18 Deep

Sliding Arm Bar Clamp, 4 In, 3-1/8 Deep

Sliding Arm Bar Clamp, 4 In, 3-1/8 Deep - Item sliding arm bar clamp swivel pad (in) 1 handle length (in) 3-5/32 pad type swivel, standard clamping surface w (in) 1-1/4 opening (in) 4 clamping surface d (in) 3/4 nominal clamping pressure 550 bar thickness (in) 5/8 throat depth (in) 3-1/8 bar size (in) 9/32 spindle dia (in) 055 country of origin (subject to change) germany. Price for each application maintenance, welding, assembly and general purpose clamping bar material tempered cold drawn forged steel screw size (in) 055 handle material tempered drop-forged steel nominal rail size (in) 5/8 x 19/64 clamp face (in) 3/4 x 1-1/4 max jaw opening (in) 4 bar width (in) 19/64 load capacity (lb) 550 swivel type non-replaceable.

 

API AC1081COMBOP4 Clamps for Mounting Truck Caps on Ford F-150 2004 Newer Set of 4

API AC1081COMBOP4 Clamps for Mounting Truck Caps on Ford F-150 2004 & Newer (Set of 4)

API AC1081COMBOP4 Clamps for Mounting Truck Caps on Ford F-150 2004 & Newer (Set of 4) - Ac1031 a = 1″ b = 2 1/4″ c = 0″, 7/8″ (see technical drawing above). Set of 4 clamps designed to mount truck caps on ford f-150 pick-up trucks. Complete installation guide. Constructed of tempered aluminum with a mill finish. Ac1081 a = 1″ b = 3 1/4″ c = 0″, 7/8″ (see technical drawing above).

 

Platte River 113456 4-pack  Clamps And Vises Specialty Clamps Frame Clamp Corners

Platte River 113456, 4-pack , Clamps And Vises, Specialty Clamps, Frame Clamp Corners

Platte River 113456, 4-pack , Clamps And Vises, Specialty Clamps, Frame Clamp Corners - Bring your old clamp back to new condition. This additional clamp corner for the heavy duty 4′ x 4′ picture framing and project clamp is a factory replacement or add on. Made of non-marring, composite material for long life. Imported.

 

Woodtek 114614 4-pack  Clamps And Vises Bar Pipe Clamps 2-12x12 Joiner Clamp With Pads

Woodtek 114614, 4-pack , Clamps And Vises, Bar & Pipe Clamps, 2-1/2″x12″ Joiner Clamp With Pads

Woodtek 114614, 4-pack , Clamps And Vises, Bar & Pipe Clamps, 2-1/2″x12″ Joiner Clamp With Pads - Clamp heads are flat on the back, allowing them to stand upright while work is assembled. Well suited for assembly and soft wood and hardwood glue-ups. Smooth hardwood handle is firmly pinned to fine thread screw. 2-1/2″ to 5″ throat depth. Malleable cast iron heads, chrome plated steel guide bars and multi-disc clutches give these clamps high priced features at an affordable price guide bar extends full length of head and is securely fastened with a steel rivet. Imported. All sizes include non-marring pads to protect work piece.

 

API AC108COMBOP4-LDTT250P Clamps Topper Tape for Mounting Truck Caps on Ford F Series Super Duty Set of 4

API AC108COMBOP4-LDTT250P Clamps & Topper Tape® for Mounting Truck Caps on Ford F Series Super Duty (Set of 4)

API AC108COMBOP4-LDTT250P Clamps & Topper Tape® for Mounting Truck Caps on Ford F Series Super Duty (Set of 4) - Constructed of tempered aluminum with a mill finish. Set of 4 clamps & 1 roll of topper tape® designed to mount truck caps on ford f series super duty pi. Complete installation guide. Ac1031 a = 1″ b = 2 1/4″ c = 0″, 7/8″ (see technical drawing above). Ac108 a = 1 3/4″ b = 3 1/4″ c = 0″, 7/8″ (see technical drawing above).

 

Stanley STHT83166 2-Inch by 4-Inch Clamp

Stanley STHT83166 2-Inch by 4-Inch Clamp

Stanley STHT83166 2-Inch by 4-Inch Clamp - 400 pounds of clamping force and up to 850 pounds when bolted to a 2″x4″. High quality new. Clamps can be inserted and repositioned anywhere along a 2″x4″. Non-mar pads to protect work surfaces. Stanley, black & decker. Eliminates the need to carry around bar clamps or pipe clamps.

 

Kreg Rip Cut R3 Shelf Jig SSW FastCap Pencil 4 Clamps 150 Pine Plugs

Kreg Rip Cut, R3, Shelf Jig, SSW, FastCap Pencil, (4) Clamps, (150) Pine Plugs

Kreg Rip Cut, R3, Shelf Jig, SSW, FastCap Pencil, (4) Clamps, (150) Pine Plugs - Comes complete with free downloadable, step-by-step plans for 10 custom home projects. Kreg jig r3 joins wood with kregs proven pocket-hole joinery. Shelf pin jig drills perfectly-placed, repeatable shelf-pin holes for custom adjustable shelving. Rip-cut cuts plywood and other sheet goods quickly and accurately.

 

Black Duck Brand Ratchet Bar 4 Clamp Converts to 8 Spreader 2 Ratchet Bar Clamps

Black Duck Brand Ratchet Bar 4″ Clamp, Converts to 8″ Spreader (2 Ratchet Bar Clamps)

Black Duck Brand Ratchet Bar 4″ Clamp, Converts to 8″ Spreader (2 Ratchet Bar Clamps) - Each ratchet bar can clamp up to 4″ and spread up to 8″. Gets the job done smooth triger action & quick release button lets you spend more time on your project. Includes two ratchet bar clamp and spreaders. Built to last pick up these ratchet clamps with durable nylon jaw assemblies.

 

Woodtek 170153 4-pack  Clamps And Vises Bar Pipe Clamps 36 Parallel Jaw Bar Clamp

Woodtek 170153, 4-pack , Clamps And Vises, Bar & Pipe Clamps, 36″ Parallel Jaw Bar Clamp

Woodtek 170153, 4-pack , Clamps And Vises, Bar & Pipe Clamps, 36″ Parallel Jaw Bar Clamp - A smooth, strengthened carbon steel bar allows the clamp head to slide quietly and results in an overall lighter weight clamp than most in this class. 1. Die cast aluminum alloy body has a durable powder coat finish. Clamp doors and drawers with even pressure to prevent bowing and distortion. Taiwan. Tpr pads are also glue resistant, preventing buildup. 16″ diameter composite handle is fitted witrh a smooth operating acme threaded screw. Available in 12″, 24″ and 36″ bar lengths. Sliding supports keep the clamped components from contacting the bar, reducing the possibility of staining from the glue. Jaw depth is 100 mm (4″) maximum clamping force is 400kg (880 lbs. ) Function is easily converted from clamping to spreading by removing the snap-on support foot and reversing the sliding head. Woodtek® parallel jaw bar clamps exert even pressure for clamping doors and drawers without distorting the alignment of the components. . Large tpr (thermal plastic rubber) pads on clamp head and foot provide cushioning to protect the workpiece and grip to help keep the clamp in place.

 

API AC101BP4 Black Mounting Clamps for Truck Caps  Camper Shells Set of 4

API AC101BP4 Black Mounting Clamps for Truck Caps / Camper Shells (Set of 4)

API AC101BP4 Black Mounting Clamps for Truck Caps / Camper Shells (Set of 4) - Install your truck cap or camper shell securely with these 4 strong mounting clamps on a short bed. Please see the product drawing for matching dimension specifications. Please contact us for directions to an on-line application chart. These clamps come with an instruction sheet providing the information you need for proper installation. Topper tape® is recommended for sealing between the truck bed and the cover.

 

Woodtek 170150 4-pack  Clamps And Vises Bar Pipe Clamps 24 Parallel Jaw Bar Clamp

Woodtek 170150, 4-pack , Clamps And Vises, Bar & Pipe Clamps, 24″ Parallel Jaw Bar Clamp

Woodtek 170150, 4-pack , Clamps And Vises, Bar & Pipe Clamps, 24″ Parallel Jaw Bar Clamp - Tpr pads are also glue resistant, preventing buildup. Sliding supports keep the clamped components from contacting the bar, reducing the possibility of staining from the glue. ) Function is easily converted from clamping to spreading by removing the snap-on support foot and reversing the sliding head. A smooth, strengthened carbon steel bar allows the clamp head to slide quietly and results in an overall lighter weight clamp than most in this class. Die cast aluminum alloy body has a durable powder coat finish. Available in 12″, 24″ and 36″ bar lengths. 16″ diameter composite handle is fitted witrh a smooth operating acme threaded screw. Jaw depth is 100 mm (4″) maximum clamping force is 400kg (880 lbs. 1. Taiwan. Clamp doors and drawers with even pressure to prevent bowing and distortion. Woodtek® parallel jaw bar clamps exert even pressure for clamping doors and drawers without distorting the alignment of the components. Large tpr (thermal plastic rubber) pads on clamp head and foot provide cushioning to protect the workpiece and grip to help keep the clamp in place.