Best Toggle Bolt out of top 17

 

18-32 x 2 Coarse Thread Toggle Bolt Combo PhillipsSlotted Truss Head Low Carbon Steel Zinc Plated Pk 50 #ad

1/8″-32 x 2″ Coarse Thread Toggle Bolt Combo (Phillips/Slotted) Truss Head Low Carbon Steel Zinc Plated Pk 50

1/8″-32 x 2″ Coarse Thread Toggle Bolt Combo (Phillips/Slotted) Truss Head Low Carbon Steel Zinc Plated Pk 50 #ad - All asmc industrial fasteners are fully traceable and lot-controlled. Pictures are representative of item, but are not of the actual item product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc, may differ from picture products are guaranteed to meet the specifications to which they are manufactured specifications allow for tolerances in dimension and shape, which can vary from lot to lot. Please see the specifications in the table above for full details if you have any questions or doubts, or if your requirements include specific dimensions, please contact us prior to placing your order. All asmc industrial fasteners are guaranteed to be of the highest quality.

 

TOGGLER SNAPTOGGLE BA Toggle Anchor with Bolts Zinc-Plated Steel Channel Made in US 38 to 3-58 Grip Range For 316-24 UNC Fastener Size Pack of 10 #ad

TOGGLER SNAPTOGGLE BA Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US, 3/8″ to 3-5/8″ Grip Range, For 3/16″-24 UNC Fastener Size (Pack of 10)

TOGGLER SNAPTOGGLE BA Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US, 3/8″ to 3-5/8″ Grip Range, For 3/16″-24 UNC Fastener Size (Pack of 10) #ad - Made in usa, and includes 3/16″-24 unc-threaded bolts. Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes. Toggle anchor installs behind 3/8″- to 3-5/8″-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material. Ultimate tensile strength is 238 lb in 1/2″ drywall and 802 lb in concrete block with a 3/16″-24 unc bolt. Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).

 

Assorted Toggle Bolt and Wing Nut 18 Piece Set #ad

Assorted Toggle Bolt and Wing Nut (18 Piece Set)

Assorted Toggle Bolt and Wing Nut (18 Piece Set) #ad - . Both slot headed and phillips headed drive bolts. Toggle wing nut dimensions and qty’s 1-9/16″ x 1/16″ x 3/8″ (l x w x h) (8pcs), 2″ x 9/16″ x 1/2″ (l x w x h) (6pcs), 2-1/8″ x 11/16″ x 9/16″ (l x w x h) (4pcs). All toggle bolts are 3″ long. Sizes include 1/58″, 3/16″ and 1/4″.

 

316-24 x 3 Coarse Thread Toggle Bolt Combo PhillipsSlotted Truss Head Low Carbon Steel Zinc Plated Pk 50 #ad

3/16″-24 x 3″ Coarse Thread Toggle Bolt Combo (Phillips/Slotted) Truss Head Low Carbon Steel Zinc Plated Pk 50

3/16″-24 x 3″ Coarse Thread Toggle Bolt Combo (Phillips/Slotted) Truss Head Low Carbon Steel Zinc Plated Pk 50 #ad - Pictures are representative of item, but are not of the actual item product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc, may differ from picture products are guaranteed to meet the specifications to which they are manufactured specifications allow for tolerances in dimension and shape, which can vary from lot to lot. All asmc industrial fasteners are guaranteed to be of the highest quality. Please see the specifications in the table above for full details if you have any questions or doubts, or if your requirements include specific dimensions, please contact us prior to placing your order. All asmc industrial fasteners are fully traceable and lot-controlled.

 

The Hillman Group The Hillman Group 41423 Round Head Toggle Bolt 18 X 4 In 12-Pack #ad

The Hillman Group The Hillman Group 41423 Round Head Toggle Bolt 1/8 X 4 In. 12-Pack

The Hillman Group The Hillman Group 41423 Round Head Toggle Bolt 1/8 X 4 In. 12-Pack #ad - Toggle bolts are anchors for use in hollow wall or hollow block. . Toggle bolts are single-use anchors. The wing spreads the force over a larger load bearing surface.

 

The Hillman Group 372518 Mini Toggle Bolt 38 X 4-Inch 8-Pack #ad

The Hillman Group 372518 Mini Toggle Bolt, 3/8 X 4-Inch, 8-Pack

The Hillman Group 372518 Mini Toggle Bolt, 3/8 X 4-Inch, 8-Pack #ad - Toggle bolts come with spring-action wings and are intended for anchoring into hollow walls. The wing disperses the weight of the secured item over a larger area, increasing the weight that can be secured compared to a regular bolt. . The wing is designed to spread apart behind the base material upon installation for firm hold in hollow wall applications.

 

LH Dottie TBC43 Toggle Bolt Mushroom Head 14-Inch-20 TPI by 3-Inch Length Zinc Plated 50-Pack #ad

L.H. Dottie TBC43 Toggle Bolt, Mushroom Head, 1/4-Inch-20 TPI by 3-Inch Length, Zinc Plated, 50-Pack

L.H. Dottie TBC43 Toggle Bolt, Mushroom Head, 1/4-Inch-20 TPI by 3-Inch Length, Zinc Plated, 50-Pack #ad - Toggle bolt, mushroom head, phillips/slotted drive, 1/4-inch-20 tpi by 3-inch length size, steel material, zinc plated finish, spring wing nut type, 50 standard package. .

 

50 14x5 Toggle Bolt Wing Anchors - Zinc #ad

(50) 1/4×5 Toggle Bolt Wing Anchors – Zinc

(50) 1/4×5 Toggle Bolt Wing Anchors – Zinc #ad - Zinc. Toggle wing. Drywall anchors. Toggle bolt. 1/4×5.

 

The Hillman Group 372500 Mini Toggle Bolt 18 X 2-Inch 25-Pack #ad

The Hillman Group 372500 Mini Toggle Bolt, 1/8 X 2-Inch, 25-Pack

The Hillman Group 372500 Mini Toggle Bolt, 1/8 X 2-Inch, 25-Pack #ad - The wing is designed to spread apart behind the base material upon installation for firm hold in hollow wall applications. . Toggle bolts come with spring-action wings and are intended for anchoring into hollow walls. The wing disperses the weight of the secured item over a larger area, increasing the weight that can be secured compared to a regular bolt.

 

The Hillman Group 372514 Mini Toggle Bolt 516 X 4-Inch 10-Pack #ad

The Hillman Group 372514 Mini Toggle Bolt, 5/16 X 4-Inch, 10-Pack

The Hillman Group 372514 Mini Toggle Bolt, 5/16 X 4-Inch, 10-Pack #ad - The wing disperses the weight of the secured item over a larger area, increasing the weight that can be secured compared to a regular bolt. The wing is designed to spread apart behind the base material upon installation for firm hold in hollow wall applications. Toggle bolts come with spring-action wings and are intended for anchoring into hollow walls.

 

TOGGLER SNAPTOGGLE BA Toggle Anchor with Bolts Zinc-Plated Steel Channel Made in US 38 to 3-58 Grip Range For 316-24 UNC Fastener Size Pack of 2 #ad

TOGGLER SNAPTOGGLE BA Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US, 3/8″ to 3-5/8″ Grip Range, For 3/16″-24 UNC Fastener Size (Pack of 2)

TOGGLER SNAPTOGGLE BA Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US, 3/8″ to 3-5/8″ Grip Range, For 3/16″-24 UNC Fastener Size (Pack of 2) #ad - Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). Ultimate tensile strength is 238 lb in 1/2″ drywall and 802 lb in concrete block with a 3/16″-24 unc bolt. Toggle anchor installs behind 3/8″- to 3-5/8″-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material. Made in usa, and includes 3/16″-24 unc-threaded bolts. Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.

 

BE 516-18 Toggler SNAPTOGGLE Heavy Duty Toggle Bolt Zinc Plated 25 #ad

(BE) 5/16-18 Toggler SNAPTOGGLE Heavy Duty Toggle Bolt Zinc Plated (25)

(BE) 5/16-18 Toggler SNAPTOGGLE Heavy Duty Toggle Bolt Zinc Plated (25) #ad - The third generation snaptoggle ® of this patented wall anchor comes with these improvements new longer and stronger plastic straps that now work in base materials 3/8″” to 3 5/8″” thick straps that snap off flush with the wall every time, assuring precise alignment a new plating that is 7x more corrosion resistant than standard zinc plating. .

 

The Hillman Group 370039 Toggle Bolt 18X2-Inch 50-Pack #ad

The Hillman Group 370039 Toggle Bolt, 1/8X2-Inch, 50-Pack

The Hillman Group 370039 Toggle Bolt, 1/8X2-Inch, 50-Pack #ad - Toggle bolts come with spring-action wings and are intended for anchoring into hollow walls. . The wing disperses the weight of the secured item over a larger area, increasing the weight that can be secured compared to a regular bolt. The wing is designed to spread apart behind the base material upon installation for firm hold in hollow wall applications.

 

12 X 6 Tumble Toggle Bolt Quantity of 1 #ad

1/2″ X 6″ Tumble Toggle Bolt (Quantity of 1)

1/2″ X 6″ Tumble Toggle Bolt (Quantity of 1) #ad - Ultimate tensile strength is 238 lb in 1/2″ drywall and 802 lb in concrete block with a 3/16″-24 unc bolt. 1/2″ x 6″ tumble toggle bolt (quantity of 1). Made in usa, and works with 3/16″-24 unc-threaded metal bolts (sold separately). Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.

 

CRL Snaptoggle 38-16 Toggle Bolt - Pack of 10 #ad

CRL Snaptoggle 3/8-16 Toggle Bolt – Pack of 10

CRL Snaptoggle 3/8-16 Toggle Bolt – Pack of 10 #ad - Snaptoggler can be used in drywall, plaster, cement board, hollow walls of block, brick, stucco, fiberglass, and wood. Laurence tb3816 crl snaptoggle 3/8″, 16 toggle anchor (10 pack). Crl snaptoggler toggle anchors pre-install without a bolt and can be installed using a screw gun because the anchor won”t spin in the hole. R. They also allow for bolt or fixture removal without the anchor falling behind the wall. Note bolts sold separately. Part numbers variations tb3816. C.

 

18 Piece Wing Toggle Bolt Assortment For Drywall And Wall Board #ad

18 Piece Wing Toggle Bolt Assortment For Drywall And Wall Board

18 Piece Wing Toggle Bolt Assortment For Drywall And Wall Board #ad - They come in sizes 1/16, 1/8, and 1/16 inches, each bolt is 3 inches long. Collapsible spring wire anchors-complete instructions for use are included under the box lid. These toggle bolts come in a divided plastic box, with 6 sections. The box measures 8-1/4 x 4 x 1 inches, and weighs 113 ounces. The box is designed so that the contents will not mix as long as the lid is closed.

 

The Hillman Group 5021 Toggle Bolts 18 X 2-Inch #ad

The Hillman Group 5021 Toggle Bolts, 1/8 X 2-Inch

The Hillman Group 5021 Toggle Bolts, 1/8 X 2-Inch #ad - The wing spreads the force over a larger load bearing surface. Toggle bolts are single-use anchors. Toggle bolts are anchors for use in hollow wall or hollow block.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.