Top 19 Best 14 Inch Band Saws

 

DELTA 28-062 14-Inch Band Saw Blade 93-12-Inch by 12-Inch 18 Teeth per Inch

DELTA 28-062 14-Inch Band Saw Blade 93-1/2-Inch by 1/2-Inch, 18 Teeth per Inch

DELTA 28-062 14-Inch Band Saw Blade 93-1/2-Inch by 1/2-Inch, 18 Teeth per Inch - The removable extruded re-saw fence allows you to lower the blade guides closer to the shorter fence for doing normal work. Designed by us here at grizzly, these new re-saw fences are an upgrade to the standard fences and allow users to alternate between a taller and shorte. These fences can be purchased as a retrofit kit for existing grizzly bandsaws as well as a complete fence system for just about any brand of saw with.

 

GOWE 355mm Floor Band Saw 14 inch Band saw 810w Woodworking Vertical Electric Saw 220-240v50hz Wood Saw

GOWE 355mm Floor Band Saw 14 inch Band saw 810w Woodworking Vertical Electric Saw 220-240v/50hz Wood Saw

GOWE 355mm Floor Band Saw 14 inch Band saw 810w Woodworking Vertical Electric Saw 220-240v/50hz Wood Saw - Product description 355mm floor band saw 14 inch band saw 810w 1 406mm x 406mm cast iron table provides large working surface 2 adjustable upper and lower blade guides provide safe, accurate and easy adjustment 3 cabinet steel stand provides stable support and extra storage room 4 tool-free adjustment blade tension allows for rapid blade changes. Tension-tested for strength & quality assurance made in usa. Fits imported 14″ band saws such as ridgid, king, etc. 1/8″ wide, 025″ thick, 14tpi, reg tooth style. For cutting hard, soft, exotic hardwoods, plastic or mild steel.

 

POWERTEC 13202X Band Saw Blade 105-Inch x 18-Inch x 14 TPI x 0025

POWERTEC 13202X Band Saw Blade 105-Inch x 1/8-Inch x 14 TPI x 0.025

POWERTEC 13202X Band Saw Blade 105-Inch x 1/8-Inch x 14 TPI x 0.025 - . Our blades are built to wear evenly and deliver straight cuts at extreme band speeds. Constructed from one piece of carbon steel, with tooth hardness of rc 64-66, our band saw blades stay sharp with a long life and consistent performance. Powertec band saw blades are made of premium material with performance that meets or exceeds oem product.

 

DELTA 28-040 14-Inch Band Saw Blade 93-12-Inch by 34-Inch 4 Teeth per Inch

DELTA 28-040 14-Inch Band Saw Blade 93-1/2-Inch by 3/4-Inch, 4 Teeth per Inch

DELTA 28-040 14-Inch Band Saw Blade 93-1/2-Inch by 3/4-Inch, 4 Teeth per Inch - Bandsaws. This bandsaw blade fits most 14 in. It is made from high carbon steel and its tension tested for stength.

 

JET 708115K JWBS-14CS 14-Inch 1 Horsepower Woodworking Bandsaw with Graphite Guide Blocks 115230-Volt 1 Phase

JET 708115K JWBS-14CS 14-Inch 1 Horsepower Woodworking Bandsaw with Graphite Guide Blocks, 115/230-Volt 1 Phase

JET 708115K JWBS-14CS 14-Inch 1 Horsepower Woodworking Bandsaw with Graphite Guide Blocks, 115/230-Volt 1 Phase - Includes stand, saw, blade, dust chute. 14-inch band saw with enclosed stand 6-inch by 13-1/2-inch cutting capacity. Cast-iron table graphite-impregnated polymer blade. 1-horsepower engine moves blade at 3,000 strokes per minute tilting table. 68 by 26 by 19 inches 15-inch by 15-inch table 185 pounds 5-year warranty.

 

HTC HRLS-5 Mobile Base for Delta 14-Inch Band Saw 28-270 or 28-280 Sunhill Band Saw 14 Model VBS-14

HTC HRLS-5 Mobile Base for Delta 14-Inch Band Saw 28-270 or 28-280; Sunhill Band Saw 14″ Model #VBS-14

HTC HRLS-5 Mobile Base for Delta 14-Inch Band Saw 28-270 or 28-280; Sunhill Band Saw 14″ Model #VBS-14 - Heavy gauge steel, full welded for strength & finished appearance. 14-inch bandsaw 28-270, 28-280. Dimension 195 x 1725. Raises machine 3/4 inch off floor. Two rigid wheels, one swivel wheel. Brake knobs to set brake on the two rigid wheels.

 

DELTA 28-033 14-Inch Band Saw Blade 93-12-Inch by 316-Inch 6 Teeth per Inch

DELTA 28-033 14-Inch Band Saw Blade 93-1/2-Inch by 3/16-Inch, 6 Teeth per Inch

DELTA 28-033 14-Inch Band Saw Blade 93-1/2-Inch by 3/16-Inch, 6 Teeth per Inch - This bandsaw blade fits most 14 in. It is made from high carbon steel and its tension tested for stength. Bandsaws.

 

DELTA 28-047 14-Inch Band Saw Blade for use with Height Attachment 105-Inch x 14-Inch 6 Teeth per Inch

DELTA 28-047 14-Inch Band Saw Blade for use with Height Attachment 105-Inch x 1/4-Inch, 6 Teeth per Inch

DELTA 28-047 14-Inch Band Saw Blade for use with Height Attachment 105-Inch x 1/4-Inch, 6 Teeth per Inch - 14-inch bandsaw 28-270, 28-280. Raises machine 3/4 inch off floor. Two rigid wheels, one swivel wheel. Brake knobs to set brake on the two rigid wheels. Dimension 195 x 1725. Heavy gauge steel, full welded for strength & finished appearance.

 

Grizzly H7584 Resaw Fence Attachment for 14-Inch Band Saws

Grizzly H7584 Resaw Fence Attachment for 14-Inch Band Saws

Grizzly H7584 Resaw Fence Attachment for 14-Inch Band Saws - Simply unbolt your existing aluminum fence (4 bolts) and bolt on the new cast iron fence. Takes less than 3 minutes to switch over. Patent pending. Note for the lx model order the h7587 resaw fence. These fences can be purchased as a retrofit kit for existing grizzly band saws as well as a complete fence system for just about any brand of saw with proper table dimensions. Designed by us here at grizzly these new re-saw fences are an upgrade to the standard fences and allow users to alternate between a taller and shorter fence within seconds. This retrofit kit allows you to upgrade your g0555/g0580/g0457 bandsaw-inchs existing aluminum fence to a cast iron fence with the taller re-saw fence attachment. The removable extruded re-saw fence allows you to lower the blade guides closer to the shorter fence for doing normal work.

 

DELTA 28-032 14-Inch Band Saw Blade 93-12-Inch by 18-Inch 14 Teeth per Inch

DELTA 28-032 14-Inch Band Saw Blade 93-1/2-Inch by 1/8-Inch, 14 Teeth per Inch

DELTA 28-032 14-Inch Band Saw Blade 93-1/2-Inch by 1/8-Inch, 14 Teeth per Inch - Fit many us and taiwanese 14″ band saws. 3 hole mount, 2″ hole centers.

 

NEW BELT After Market CraftsmanSears 14 inch Band Saw 1-JL20020002 119224100 351224000 29502

*NEW BELT* After Market Craftsman/Sears 14 inch Band Saw 1-JL20020002 119.224100 351224000 29502

*NEW BELT* After Market Craftsman/Sears 14 inch Band Saw 1-JL20020002 119.224100 351224000 29502 - 22400 137. New replacement rubber belt craftsman 14 inch band saw 1/3 hp motor bandsaws 1-jl20020002 119224 1192241 29502 224010 351224010 315 224000 224010 119. 224140 351224000 351224010 119224000 119224010.

 

POWERTEC 13118X Band Saw Blade 93-12-Inch x 18-Inch x 14 TPI x 0025

POWERTEC 13118X Band Saw Blade 93-1/2-Inch x 1/8-Inch x 14 TPI x 0.025

POWERTEC 13118X Band Saw Blade 93-1/2-Inch x 1/8-Inch x 14 TPI x 0.025 - Reliable cutting action with guaranteed welds. Applications hard/soft wood / plastic / non-ferrous metal. Fits 14″ band saw delta 28-475x, 28-206, 28-276 grizzly g0580, g0555(x) shop fox w1706. Fits steel city 50100 rikon 10-320, 10-315 (12″ band saw). Made of high carbon steel.

 

Woodstock D4014 Urethane Tire for 14-Inch Band saws Pair

Woodstock D4014 Urethane Tire for 14-Inch Band saws, Pair

Woodstock D4014 Urethane Tire for 14-Inch Band saws, Pair - Long lasting and durable urethane tires. . These urethane tires are designed for 14-inch bandsaws and are a must have.

 

Olson Saw CB50050BL Imported 14-Inch Band Saw Accessory Cool Blocks

Olson Saw CB50050BL Imported 14-Inch Band Saw Accessory Cool Blocks

Olson Saw CB50050BL Imported 14-Inch Band Saw Accessory Cool Blocks - Cool blocks blade guides are made from a high tech, non-metallic composite material, “graphite impregnated phenolic laminate” which contains three synthetic dry lubricants that lubricate the blade but do not make it oily. For most 14″ band saws including sears craftsman 14″, jet, grizzly, ridgid. . The metal to metal contact made by old metal guide blocks creates heat and friction which cause premature blade wear and breakage.

 

RIKON 13-900 14-Inch Band Saw Fence

RIKON 13-900 14-Inch Band Saw Fence

RIKON 13-900 14-Inch Band Saw Fence - Includes ripsaw bar. Easy to read scale with magnified cursor.

 

DELTA 28-060 14-Inch Band Saw Blade 93-12-Inch by 12-Inch 14 Teeth per Inch

DELTA 28-060 14-Inch Band Saw Blade 93-1/2-Inch by 1/2-Inch, 14 Teeth per Inch

DELTA 28-060 14-Inch Band Saw Blade 93-1/2-Inch by 1/2-Inch, 14 Teeth per Inch - Hard tooth, flex back general purpose blades for ferrous and non-ferrous metal cutting. 1/2″ wide by 93-1/2″ long. Fits delta 14-inch band saws and others requiring a 93-1/2-inch blade. High carbon steel, tension-tested for strength. 14 teeth per inch.

 

Powermatic 1791216K Model PWBS-14CS Deluxe 14-Inch 1-34-Inch Woodworking Bandsaw with Bearing Guides Lamp and Chip Blower 115230-Volt 1 Phase

Powermatic 1791216K Model PWBS-14CS Deluxe 14-Inch 1-3/4-Inch Woodworking Bandsaw with Bearing Guides, Lamp, and Chip Blower, 115/230-Volt 1 Phase

Powermatic 1791216K Model PWBS-14CS Deluxe 14-Inch 1-3/4-Inch Woodworking Bandsaw with Bearing Guides, Lamp, and Chip Blower, 115/230-Volt 1 Phase - Includes saw, motor, blade, foot brake, work light, rip fence, mitre-gauge, chip blower. 14-inch band saw built-in air pump clears chips fully enclosed motor for longevity. Solid steel and cast-iron construction for durability built-in halogen lamp. 1-1/2-horsepower motor table tips 45-degrees right and 10-degrees left. 15-inch by 15-inch table 44-inch table height 20 by 34 by 68 total dimensions 203-pounds 1-year warranty.

 

RIKON 13-900 14-Inch Band Saw Fence by RIKON Power Tools

RIKON 13-900 14-Inch Band Saw Fence by RIKON Power Tools

RIKON 13-900 14-Inch Band Saw Fence by RIKON Power Tools - Cutting for hard/soft wood/plastic/ non-ferrous metal. Rikon 13-900 14-inch band saw fence. High carbon steel. Industrial-quality band saw blades. For long lasting sharpness retention.

 

Olson Saw CB50050BL Imported 14-Inch Band Saw Accessory Cool Blocks by OLSON SAW

Olson Saw CB50050BL Imported 14-Inch Band Saw Accessory Cool Blocks by OLSON SAW

Olson Saw CB50050BL Imported 14-Inch Band Saw Accessory Cool Blocks by OLSON SAW - For most 14 band saws including sears craftsman 14, jet, grizzly, ridgedthe metal to metal contact made by old metal guide blocks creates heat and friction which cause premature blade wear and breakagecool blocks blade guides are made from a high tech, non-metallic composite material, graphite impregnated phenolic laminate.