16 Coolest Sorbies

 

Robert Sorby H6542 Turning Tool Set 8 Piece #ad

Robert Sorby H6542 Turning Tool Set (8 Piece)

Robert Sorby H6542 Turning Tool Set (8 Piece) #ad - This 8-pc. Overall lengths are 16″ to 19″. Hss turning tool set includes 3/4″ roughing gouge, 1/4″ and 1/2″ spindle gouge, 3/8″ bowl gouge, 3/4″ standard skew, 3/16″ diamond side cut scraper, 1″ square scraper, and 1/2″ round scraper. .

 

Sorby TurnMaster Mushroom Titanium Nitride Replacement Cutter #ad

Sorby TurnMaster Mushroom Titanium Nitride Replacement Cutter

Sorby TurnMaster Mushroom Titanium Nitride Replacement Cutter #ad - All cutters are interchangeable. Titanium nitride has been plasma bonded onto quality hss cutters. Can be sharpened with traditional equipment used for hss. Provides prolonged cutting life close to that of carbide.

 

Robert Sorby 895H Relief Cutting Tool #ad

Robert Sorby #895H Relief Cutting Tool

Robert Sorby #895H Relief Cutting Tool #ad - It cuts the rabbet (relief cut) prior to cutting threads. This rabbet assures that the threads stop before running into and marring the container. Made in england. Hss blade with ash handle. The relief tool is used in conjunction with sorby’s thread cutting tools (10, 16, and 20 tpi).

 

Robert Sorby 893H Thread Tool Support #ad

Robert Sorby #893H Thread Tool Support

Robert Sorby #893H Thread Tool Support #ad - It acts as a hand held auxiliary support for better positioning and control of the thread cutters and relief tools. Made in england. The thread tool support is used in conjunction with sorby’s thread cutting tools. Hss blade with ash handle.

 

Robert Sorby 472 Cutting Tip Holder #ad

Robert Sorby #472 Cutting Tip Holder

Robert Sorby #472 Cutting Tip Holder #ad - It is double ended to allow you to hold comfortably almost every sorby tool tip without fear of catching the cutting tip or, even more importantly, your finger, in a sharpening belt or grinding wheel. Made in england. An inexpensive yet indispensible little sharpening accessory.

 

Robert Sorby RSTM-HCT123 TurnMaster Handled with Round Detail Point Square Tungsten Carbide Cutters #ad

Robert Sorby RSTM-HCT123 TurnMaster Handled with Round, Detail Point, & Square Tungsten Carbide Cutters

Robert Sorby RSTM-HCT123 TurnMaster Handled with Round, Detail Point, & Square Tungsten Carbide Cutters #ad - Cutters are available in 3 different materials, tungsten carbide (tc), high speed steel (hss), and the titanium nitride (tin) coated excelsior line. The titanium nitride coated excelsior tips offer the same characteristics as plain hss, but with the added toughness (has an rc of 90) and prolonged edge life that tin provides. Choose super tough tungsten carbide for roughing operations or for abrasive materials such as high silica exotic woods. Also includes a cutter release key, torx wrenches, and an instruction sheet. The turnmaster will accept any of 3 standard cutters (square, round, or detail), as well as a wide range of other cutting tips which have been specially configured to work with it. It has a high tensile strength torx screw to keep cutters tight. Will also accept any of sorby’s other turnmaster cutting tips. The turnmaster incorporates a patented interchangeable cutter head that locks into three positions. The round shank has a flat underside for stability on the rest. The handled version of sorby’s versatile turnmaster tool with all three (round, detail point, and square) of their primary tungsten carbide cutters (tcc). This allows for both scraping (for fast material removal) and shear scraping (for fine finishing and smoothing) options. This lets turners select just the right cutter for the materials being turned. The robert sorby turnmaster is the first wood turning tool in the world to combine three cutting edge technologies in one amazingly versatile tool. It’s collection of available parts and cutters make it the most flexible and value added single turning tool on the market today. Tool has a 12″ long ash handle and is 20-5/8″ long overall. Both the hss and tin cutters are re-sharpenable. Choose high speed steel for clean detail and fine finishing. Specifications the rstm-htc123 comes with one each of the round, detail point, and square tungsten carbide cutters. It also includes a special key for quick cutter release.

 

Robert Sorby Proedge Short Tool Platform #ad

Robert Sorby Proedge Short Tool Platform

Robert Sorby Proedge Short Tool Platform #ad - All cutters are interchangeable. Titanium nitride has been plasma bonded onto quality hss cutters. Provides prolonged cutting life close to that of carbide. Can be sharpened with traditional equipment used for hss.

 

Sorby B812192 Spindlemaster 34-Inch #ad

Sorby B812192 Spindlemaster, 3/4-Inch

Sorby B812192 Spindlemaster, 3/4-Inch #ad - Size 3/4″. . It beads, coves, planes, trims end grain and much more easy to use and sharpen, its enhanced cutting tip, shear cutting action and polished bevel produce superb results across a wide variety of woods including softer species like pine.

 

Robert Sorby H0496 Spindle Roughing-Out Gouge HSS 34 #ad

Robert Sorby H0496 Spindle Roughing-Out Gouge HSS, 3/4″

Robert Sorby H0496 Spindle Roughing-Out Gouge HSS, 3/4″ #ad - Not designed for bowl grain projects. Recommended for the initial turning of uneven or square spindle stock to round. Item is manufactured in united kingdom.

 

7 Robert Sorby 977 Double Ended Calipers #ad

7″ Robert Sorby #977 Double Ended Calipers

7″ Robert Sorby #977 Double Ended Calipers #ad - Made in england. The increased throat depth of this 7″ version allows them to be used on larger diameter vessels that have restricted openings. An indispensable addition to the turner’s tool kit, double-ended calipers are ideal for both measuring vessel wall thicknesses and checking turning diameters. Using calipers while turning will increase the accuracy of measurement readings and transfers and speed the turning process. The mirror image design of the caliper automatically transfers the measurement taken at one end to the opposite end so that you can take an accurate reading without removing the caliper from the work. The calipers are made from plated steel for corrosion resistance and have a friction fit adjustment point.

 

Robert Sorby Proedge Knife Jig Small #ad

Robert Sorby Proedge Knife Jig Small

Robert Sorby Proedge Knife Jig Small #ad - Universal arm and instructions. England set includes a small knife holder back plate wear plate. The knife holders clamp blades securely across the holder’s full length. The adjustable collar on the holder arm will allow different bevel settings to match the knife type, from a steep angle for carving knives to a shallow angle for a fish filleting knife. For sharpening pocket knives, carving knives, and other blades up to 8″ long. . Holders are also available separately so you can upgrade your existing set to to handle the opposite size just by adding the appropriate holder. A simple and fast means of sharpening knives to a razor edge on your proedge system.

 

Robert Sorby 890H10 Pair of Thread Cutters - 10TPI #ad

Robert Sorby #890H/10 Pair of Thread Cutters – 10TPI

Robert Sorby #890H/10 Pair of Thread Cutters – 10TPI #ad - The optional relief tool (#19072) and tool support (#19074) are highly recommended accessories to help ensure the cutting of ideally formed threads. Detailed instructions are included with the thread cutters. Ash handles. The tools have a unique enhanced helix angle design specifically for use in wood, so you can be assured of smooth and precise results. Hss blades. The thread cutters come as a pair that will cut both the male and female threads. Used to make lidded boxes and other threaded turnings, sorby’s threading tools bring a tremendously fascinating feature to projects. Made in england.

 

Robert Sorby 370A Micro Spiraling System Complete #ad

Robert Sorby #370/A Micro Spiraling System Complete

Robert Sorby #370/A Micro Spiraling System Complete #ad - A high quality fine steel tool cutter for sorby’s micro spiralling system. Made in england. Note for sorby’s micro system only. Will not fit full size set.

 

38 Robert Sorby 840H Spindle Gouge #ad

3/8″ Robert Sorby #840H Spindle Gouge

3/8″ Robert Sorby #840H Spindle Gouge #ad - Create coves, beads, and other profiles. Has a handle length of 10″ and an overall length of 16-1/2″. Made in england. Ash handle. Standard tip grind. Detailing tool used for between center work where the grain runs parallel to the lathe bed.

 

Robert Sorby 890H16 Pair of Thread Cutters - 16TPI #ad

Robert Sorby #890H/16 Pair of Thread Cutters – 16TPI

Robert Sorby #890H/16 Pair of Thread Cutters – 16TPI #ad - Detailed instructions are included with the thread cutters. Ash handles. Made in england. The optional relief tool (#19072) and tool support (#19074) are highly recommended accessories to help ensure the cutting of ideally formed threads. Hss blades. The tools have a unique enhanced helix angle design specifically for use in wood, so you can be assured of smooth and precise results. The thread cutters come as a pair that will cut both the male and female threads. Used to make lidded boxes and other threaded turnings, sorby’s threading tools bring a tremendously fascinating feature to projects.

 

Robert Sorby H9086 Sandmaster #ad

Robert Sorby H9086 Sandmaster

Robert Sorby H9086 Sandmaster #ad - Comes with a 2″ velcro pad for quick change of abrasive discs. Sandmaster avoids marking often associated with sanding by hand. It allows both finished sanding and polishing of work pieces whilst still on the lathe. The 3″ pad can be added as an optional extra for bigger projects. . This sandmaster is a perfect addition to any turner’s tool kit.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.