Chicago Latrobe 165 Series High-Speed Steel Drill Blank Set with Metal Case, Uncoated (Bright) Finish, Inch, 29-piece, 1/16″ – 1/2″ in 1/64″ increments
- Uncoated (bright) finish is an untreated surface that can be used on a range of materials, especially soft metals. Metal index case has labeled compartments for identification and organization of drill blanks. Set of 29 drill blanks includes inch sizes 1/16″ through 1/2″ in 1/64″ increments. High-speed steel (hss) provides hardness for wear resistance. Tight diameter tolerance for precision drilling or measuring applications.
Drill Blank – Size: 3.00 MM (.1181″), OAL: 2-3/4″ (3 Pcs.)
- With tight dimensional tolerances, republic drill blanks are perfect for any project needing precise finished ground stock. Republic blanks have been used for many purposes over the years. 6250″ (-. Republic h. 013mm). 6251″ to 1. 5001″ to. 5000″ (-. S. 005mm), from. Drill blank tolerances up to. Blanks have been used as shafts, arbors, guide rods, rollers, gages, alignment pins, punches, knockout pins, as well as for stock in the manufacturing of specialty tools and instruments. 0005″ or -. S. Precision ground, specifically made as blanks for precision drills. 0000″ (-. 008mm), from. 0002″ or. 0003 or -.
Drill Blank – Size: 3/8″ (.3750″), OAL 5″ (2 Pcs.)
- 008mm), from. 0002″ or. Drill blank tolerances up to. 0000″ (-. Meda blanks have been used for many purposes over the years. 005mm), from. 5001″ to. 5000″ (-. With tight dimensional tolerances, meda drill blanks are perfect for any project needing precise finished ground stock. 6251″ to 1. 0005″ or -. S. 6250″ (-. Meda h. Blanks have been used as shafts, arbors, guide rods, rollers, gages, alignment pins, punches, knockout pins, as well as for stock in the manufacturing of specialty tools and instruments. Precision ground, specifically made as blanks for precision drills. 0003 or -. S. 013mm).
Drill America DWDBL3/8 HSS Drill Blank, 3/8″ (Pack of 6)
- Drill blank, no cutting flutes. High speed steel. Bright finish.
Drill America DWD29J-DB-SET Qualtech 29 Piece High-Speed Steel Jobber Length Drill Blank Set in Metal Case, Black Oxide Finish, Round Shank (Pack of 1)
- Round shanks allow use with a wide variety of toolholding systems. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. 29 piece drill blank set comes in a metal case. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Alfa Tools DB50113 High-Speed Steel Jobber Drill Blank, 1/4″
- 0005″. 0000″ to 0. Alfa usa’s super high speed steel drill blanks are hardened and ground to a tolerance of 0. Drill blanks are used as stock for small tools, a gauge to check hole and drill bushing size or as guide pins for die sets.
Drill America DWD115J-DB-SET Qualtech 115 Piece High-Speed Steel Jobber Length Drill Blank Set in Metal Case, Black Oxide Finish, Round Shank (Pack of 1)
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. 115 piece drill blank set comes in a metal case. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems.
Drill Blank – Size: #58 (.0420″), OAL 1-5/8″ (10 Pcs.)
- 013mm). Meda h. Blanks have been used as shafts, arbors, guide rods, rollers, gages, alignment pins, punches, knockout pins, as well as for stock in the manufacturing of specialty tools and instruments. 5001″ to. 0000″ (-. With tight dimensional tolerances, meda drill blanks are perfect for any project needing precise finished ground stock. 0002″ or. Meda blanks have been used for many purposes over the years. 008mm), from. 0003 or -. 005mm), from. 6251″ to 1. Precision ground, specifically made as blanks for precision drills. 6250″ (-. Drill blank tolerances up to. S. S. 5000″ (-. 0005″ or -.
Drill Blank – Size: 1″, (1.0000″), OAL 6″
- S. 5001″ to. With tight dimensional tolerances, meda drill blanks are perfect for any project needing precise finished ground stock. Blanks have been used as shafts, arbors, guide rods, rollers, gages, alignment pins, punches, knockout pins, as well as for stock in the manufacturing of specialty tools and instruments. 0000″ (-. S. Precision ground, specifically made as blanks for precision drills. 0005″ or -. 5000″ (-. 008mm), from. 6251″ to 1. 0003 or -. 013mm). 6250″ (-. Meda h. Meda blanks have been used for many purposes over the years. 0002″ or. 005mm), from. Drill blank tolerances up to.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
