Top 25 Pulley Grooves for 2020

 

Boston Gear PLB5015DF09-3/8 Timing Pulley, 5 mm Pitch, 9 mm Wide Belts, 15 Grooves, 0.375″ Bore Diameter, 0.895″ Outside Diameter, 0.813″ Overall Length, Lexan with Aluminum Insert, Double Flange - Fiberglass-reinforced polycarbonate resin thermoplastic for light weight and low noise. 5 mm pitch profile for use with same-pitch curvilinear tooth 9 mm wide belts. Grooved design with 15 grooves for applications requiring synchronous rotation. Double flange to resist belt side thrust and maintain belt contact. Stock bore with 0375″ diameter does not require use of a bushing.

 

Boston Gear G1220 Grooved Pulley, Fits Round Belts 0.1875″ or Smaller, 0.250″ Face, Brass - Boston gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components. Pulleys (sheaves) are available in different types v-belt, timing, round, or flat. Pulley drive systems consist of two or more pulleys that connect with a belt to transmit mechanical power across greater distances than systems that use gears. Pulleys must match the belts that connect them (timing pulleys with trapezoidal grooves require a belt with trapezoidal teeth) and engage either on the sides of the pulley flange (classical v-belts, narrow v-belts, or round belts), on the flat outer diameter of the pulley (flat belts), or in pulley grooves that match belt teeth (timing belts, synchronous belts, or curvilinear belts). The company, founded in 1877, is headquartered in charlotte, nc, and meets international organization for standardization (iso) standard 90012008 standard. Pulleys are used in drive designs in the automotive, appliance, agriculture, textile, printing, mining, and office equipment industries. Pulleys are made of various materials, including cast iron, steel, aluminum, polycarbonate resin thermoplastic, and nylon, and they can meet a broad range of requirements, including increased torque, resistance to wear, and light weight. .

 

Martin 28H100SDS HF-1 Type Timing Pulley, 1/2″ Pitch, 28 Grooves, Heavy, 3/4 and 1″ Wide Belts, SDS QD Bushing, Double Flange - High carbon steel for resistance to wear. Double flange to resist belt side thrust and maintain belt contact. Grooved design with 28 grooves for applications requiring synchronous rotation. For use with sds quick disconnect (qd) bushing (sold separately). Heavy (h) pitch profile for use with same-pitch trapezoidal tooth 3/4 and 1″ wide belts.

 

20pcs 624ZZ 4mm V Groove Sealed Guide Pulley Rail Ball Bearing 4x13x6mm - Dimension(inside diameter)4mm x (outer diameter)13mm x (thickness)6mm. Wire pulley groove,wide application. V groove width 4mmv groove deepness 1mm. This item is ordinary precision, adaptation to low speed, low load applications. Materialhigh carbon steel.

 

Boston Gear G1217 Grooved Pulley, Fits Round Belts 0.1875″ or Smaller, 0.250″ Face, Brass, 1-1/2″ Outside Diameter - Pulleys must match the belts that connect them (timing pulleys with trapezoidal grooves require a belt with trapezoidal teeth) and engage either on the sides of the pulley flange (classical v-belts, narrow v-belts, or round belts), on the flat outer diameter of the pulley (flat belts), or in pulley grooves that match belt teeth (timing belts, synchronous belts, or curvilinear belts). Pulleys (sheaves) are available in different types v-belt, timing, round, or flat. The company, founded in 1877, is headquartered in charlotte, nc, and meets international organization for standardization (iso) standard 90012008 standard. Boston gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components. Pulley drive systems consist of two or more pulleys that connect with a belt to transmit mechanical power across greater distances than systems that use gears. Pulleys are made of various materials, including cast iron, steel, aluminum, polycarbonate resin thermoplastic, and nylon, and they can meet a broad range of requirements, including increased torque, resistance to wear, and light weight. Pulleys are used in drive designs in the automotive, appliance, agriculture, textile, printing, mining, and office equipment industries.

 

Boston Gear PLB5020DF09-1/4 Timing Pulley, 5 mm Pitch, 20 Grooves, 9mm Wide Belts, 0.250″ Bore Diameter, 1.208″ Outside Diameter, 0.813″ Overall Length, Lexan with Aluminum Insert, Double Flange - Fiberglass-reinforced polycarbonate resin thermoplastic for light weight and low noise. Double flange to resist belt side thrust and maintain belt contact. 5 mm pitch profile for use with same-pitch curvilinear tooth 9 mm wide belts. Stock bore with 0250″ diameter does not require use of a bushing. Grooved design with 20 grooves for applications requiring synchronous rotation.

 

G & G Manufacturing Company 011-4A08 V-Belt Idler Pulley, A Groove, 4″ O.D. - Fits ‘a’ belt. V-belt idler pulley single groove. Bore size 1/2″ id extended race bearing pressed in. Outside diameter 4″.

 

Boston Gear G1219 Grooved Pulley, Fits Round Belts 0.1875″ or Smaller, 0.250″ Face, Brass - The company, founded in 1877, is headquartered in charlotte, nc, and meets international organization for standardization (iso) standard 90012008 standard. Pulleys are used in drive designs in the automotive, appliance, agriculture, textile, printing, mining, and office equipment industries. Pulleys are made of various materials, including cast iron, steel, aluminum, polycarbonate resin thermoplastic, and nylon, and they can meet a broad range of requirements, including increased torque, resistance to wear, and light weight. Pulleys (sheaves) are available in different types v-belt, timing, round, or flat. Pulley drive systems consist of two or more pulleys that connect with a belt to transmit mechanical power across greater distances than systems that use gears. Boston gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components. Pulleys must match the belts that connect them (timing pulleys with trapezoidal grooves require a belt with trapezoidal teeth) and engage either on the sides of the pulley flange (classical v-belts, narrow v-belts, or round belts), on the flat outer diameter of the pulley (flat belts), or in pulley grooves that match belt teeth (timing belts, synchronous belts, or curvilinear belts).

 

Boston Gear PLB5016DF09-5/16 Timing Pulley, 5 mm Pitch, 16 Grooves, 9mm Wide Belts, 0.313″ Bore Diameter, 0.958″ Outside Diameter, 0.813″ Overall Length, Lexan with Aluminum Insert, Double Flange - Stock bore with 0313″ diameter does not require use of a bushing. Fiberglass-reinforced polycarbonate resin thermoplastic for light weight and low noise. Double flange to resist belt side thrust and maintain belt contact. 5 mm pitch profile for use with same-pitch curvilinear tooth 9 mm wide belts. Grooved design with 16 grooves for applications requiring synchronous rotation.

 

Martin 60H100SF H-2 Type Timing Pulley, 1/2″ Pitch, 60 Grooves, Heavy, 3/4 and 1″ Wide Belts, SF QD Bushing, Flangeless - Grooved design with 60 grooves for applications requiring synchronous rotation. For use with sf quick disconnect (qd) bushing (sold separately). Astm a48 class 30 gray cast iron for resistance to wear, corrosion, and galling. Flangeless pulley for use where belt side thrust is not an issue. Heavy (h) pitch profile for use with same-pitch trapezoidal tooth 3/4 and 1″ wide belts.

 

Boston Gear PA3011DF090 Timing Pulley, 3 mm Pitch, 9 mm Wide Belts, 11 Grooves, 0.125″ Bore Diameter, 0.384″ Outside Diameter, 0.688″ Overall Length, Aluminum, Double Flange - Clear anodized aluminum for light weight and corrosion resistance. 3 mm pitch profile for use with same-pitch curvilinear tooth 9 mm wide belts. Stock bore with 0125″ diameter does not require use of a bushing. Double flange to resist belt side thrust and maintain belt contact. Grooved design with 11 grooves for applications requiring synchronous rotation.

 

Atoplee 3124mm 5225mm 5165mm High Carbon Steel Wire V Groove Pulley [3124mm, 20pcs] - Specifications materialhigh carbon steel dimension(inside diameter)3mm x (outer diameter)12mm x (thickness)4mm v groove width 2. 5mm v groove deepness 1mm package included 20pcs wire pulley with v groove.

 

Atoplee 10pcs 3*12*4mm High Carbon Steel Wire V Groove Pulley - Specifications materialhigh carbon steel dimension(inside diameter)3mm x (outer diameter)12mm x (thickness)4mm v groove width 2. 5mm v groove deepness 1mm package included 10pcs wire pulley with v groove.

 

Martin 18H200SH EF-1 Type Timing Pulley, 1/2″ Pitch, 18 Grooves, Heavy, 2″ Wide Belts, SH QD Bushing, Double Flange - Grooved design with 18 grooves for applications requiring synchronous rotation. Heavy (h) pitch profile for use with same-pitch trapezoidal tooth 2″ wide belts. For use with sh quick disconnect (qd) bushing (sold separately). High carbon steel for resistance to wear. Double flange to resist belt side thrust and maintain belt contact.

 

Martin 24H100SDS EF-1 Type Timing Pulley, 1/2″ Pitch, 24 Grooves, Heavy, 3/4 and 1″ Wide Belts, SDS QD Bushing, Double Flange - Heavy (h) pitch profile for use with same-pitch trapezoidal tooth 3/4 and 1″ wide belts. Double flange to resist belt side thrust and maintain belt contact. High carbon steel for resistance to wear. For use with sds quick disconnect (qd) bushing (sold separately). Grooved design with 24 grooves for applications requiring synchronous rotation.

 

Boston Gear G1216 Grooved Pulley, Fits Round Belts 0.1875″ or Smaller, 0.250″ Face, Brass - Pulleys are made of various materials, including cast iron, steel, aluminum, polycarbonate resin thermoplastic, and nylon, and they can meet a broad range of requirements, including increased torque, resistance to wear, and light weight. Pulleys are used in drive designs in the automotive, appliance, agriculture, textile, printing, mining, and office equipment industries. Boston gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components. . Pulley drive systems consist of two or more pulleys that connect with a belt to transmit mechanical power across greater distances than systems that use gears. The company, founded in 1877, is headquartered in charlotte, nc, and meets international organization for standardization (iso) standard 90012008 standard. Pulleys must match the belts that connect them (timing pulleys with trapezoidal grooves require a belt with trapezoidal teeth) and engage either on the sides of the pulley flange (classical v-belts, narrow v-belts, or round belts), on the flat outer diameter of the pulley (flat belts), or in pulley grooves that match belt teeth (timing belts, synchronous belts, or curvilinear belts). Pulleys (sheaves) are available in different types v-belt, timing, round, or flat.

 

Martin TB48L075 CF-1 Type Timing Pulley, 3/8″ Pitch, 48 Grooves, Light, 3/4″ Wide Belts, 2012 Taper Bushing, Double Flange - Light (l) pitch profile for use with same-pitch trapezoidal tooth 3/4″ wide belts. Astm a48 class 30 gray cast iron for resistance to wear, corrosion, and galling. Grooved design with 48 grooves for applications requiring synchronous rotation. For use with 2012 taper bushing (tb) (sold separately). Double flange to resist belt side thrust and maintain belt contact.

 

Martin 18H150SH EF-1 Type Timing Pulley, 1/2″ Pitch, 18 Grooves, Heavy, 1-1/2″ Wide Belts, SH QD Bushing, Double Flange - Heavy (h) pitch profile for use with same-pitch trapezoidal tooth 1-1/2″ wide belts. Double flange to resist belt side thrust and maintain belt contact. For use with sh quick disconnect (qd) bushing (sold separately). High carbon steel for resistance to wear. Grooved design with 18 grooves for applications requiring synchronous rotation.

 

Martin 18H100SH EF-1 Type Timing Pulley, 1/2″ Pitch, 18 Grooves, Heavy, 3/4 and 1″ Wide Belts, SH QD Bushing, Double Flange - Double flange to resist belt side thrust and maintain belt contact. For use with sh quick disconnect (qd) bushing (sold separately). Heavy (h) pitch profile for use with same-pitch trapezoidal tooth 3/4 and 1″ wide belts. Grooved design with 18 grooves for applications requiring synchronous rotation. High carbon steel for resistance to wear.

 

G & G Manufacturing Company 007200655 AB Combination Groove Split Steel Weldapulley, 6-1/2″ O.D. - Groove ab combination will fit either an ‘a’ or ‘b’ v-belt. Rated up to 15 horsepower. Bore size 1-5/8″. 6-1/2″ od, single groove split steel pulley. Fits any w series weldahub to make a bored to size pulley.

 

G & G Manufacturing Company 007200555 AB Combination Groove Split Steel Weldapulley, 5-1/2″ O.D. - 5-1/2″ od, single groove split steel pulley. Groove ab combination will fit either an ‘a’ or ‘b’ v-belt. Rated up to 15 horsepower. Fits any w series weldahub to make a bored to size pulley. Bore size 1-5/8″.

 

Martin 20H150SH EF-1 Type Timing Pulley, 1/2″ Pitch, 20 Grooves, Heavy, 1-1/2″ Wide Belts, SH QD Bushing, Double Flange - For use with sh quick disconnect (qd) bushing (sold separately). Grooved design with 20 grooves for applications requiring synchronous rotation. Heavy (h) pitch profile for use with same-pitch trapezoidal tooth 1-1/2″ wide belts. Steel for resistance to wear. Double flange to resist belt side thrust and maintain belt contact.

 

TOOGOO(R) Double Flange XL Type 1/5″ Pitch 20 Tooth Groove Belt Timing Pulley - The timing pulley permit synchronizing shaft rotations and is also useful in high-reduction drives where there is need to improve the wrap-around capabilities of belts. The measurement allowed error is 1¡À cm. Toogoo(r) double flange xl type 1/5″ pitch 20 tooth groove belt timing pulleydescriptiondesigned with double flange, is suitable for 0. 43″ wide belt. Our products will enhance your experience to unparalleled inspiration. Toogoo is a registered trademark. Notelight shooting and differnent displays may cause the color of the item in the picture a little different from the real thing. Only authorized seller of toogoo can sell under toogoo listings. Used widely in milling machine, cnc engine lathe, gear shaper, hobbing machine, drilling machine or other machinery transmission occassions.

 

SODIAL(R) Double Flange XL Type 1/5″ Pitch 20 Tooth Groove Belt Timing Pulley - 43″ wide belt. The timing pulley permit synchronizing shaft rotations and is also useful in high-reduction drives where there is need to improve the wrap-around capabilities of belts. Sodial is a registered trademark. Only authorized seller of sodial can sell under sodial listings. Notelight shooting and differnent displays may cause the color of the item in the picture a little different from the real thing. Sodial(r) double flange xl type 1/5″ pitch 20 tooth groove belt timing pulleydescriptiondesigned with double flange, is suitable for 0. Our products will enhance your experience to unparalleled inspiration. Used widely in milling machine, cnc engine lathe, gear shaper, hobbing machine, drilling machine or other machinery transmission occassions. The measurement allowed error is 1¡À cm.

 

G & G Manufacturing Company 007201005 AB Combination Groove Split Steel Weldapulley, 10″ O.D. - Rated up to 15 horsepower. Fits any w series weldahub to make a bored to size pulley. Bore size 1-5/8″. 10″ od, single groove split steel pulley. Groove ab combination will fit either an ‘a’ or ‘b’ v-belt.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.