Top 25 Pipe Cutters for 2020

 

ABN Copper Pipe Cutter 18in to 1-14in 3-32mm Tubing Cutters Aluminum Pipe Cutter Brass Tube Cutter 1-Pack

ABN Copper Pipe Cutter, 1/8in to 1-1/4in (3-32mm) Tubing Cutters, Aluminum Pipe Cutter, Brass Tube Cutter 1-Pack

ABN Copper Pipe Cutter, 1/8in to 1-1/4in (3-32mm) Tubing Cutters, Aluminum Pipe Cutter, Brass Tube Cutter 1-Pack - Quick & precise cuts use the abn small tubing cutter to quickly and precisely cut tubing in almost any application remember to pull back the blade and revolve the flexible pvc pipe while compressing (this is a ratcheting tool, so the blade needs to be reset after use). Finish the job for brass, copper, aluminum, and thin wall tubing applications 59″ x 125″ x 22″ inch (15cm x 32cm x 56cm) overall dimensions allow access in hard-to-reach areas. Easy to use place tubing between cutter wheel and rollers, spin feed wheel to bring a firm pressure on the tube, turn feed wheel an additional half turn for first cut and then revolve tool around pipe as the tool begins to cut the tube, advance the feed knob keeping an even pressure until the cut is completed, then use the slide reamer to remove any burr formed inside the tube which could restrict flow or cause poor flaring. Simple deburring retractable (fold-away) slide lock reamer deburring blade to clean any burrs left after cutting reamer also ensures a better connection hole in reamer can be used to open an acetylene tank. Built to last adjustment knob constructed from knurled plastic for easy grip cutter wheel constructed from alloy steel with sharp points for easy use and efficient cutting 2 flare groove rollers make rotation simple and prevent skipping and jumping for most consistent tracking (no threading) cutting wheel life and adjustment amount for each turn of tool is directly proportionate to the hardness of the material being cut.

 

Zantle Pipe and Tube Cutter Ratcheting Hose Cutter One-hand Fast Pipe Cutting Tool with Ratchet Drive for Cutting Less Than 1-14 OD PEX PVC and PPR Pipe

Zantle Pipe and Tube Cutter, Ratcheting Hose Cutter One-hand Fast Pipe Cutting Tool with Ratchet Drive for Cutting Less Than 1-1/4″ O.D. PEX, PVC, and PPR Pipe

Zantle Pipe and Tube Cutter, Ratcheting Hose Cutter One-hand Fast Pipe Cutting Tool with Ratchet Drive for Cutting Less Than 1-1/4″ O.D. PEX, PVC, and PPR Pipe - 【High quality and safety】the durable tube cutter are made of manganese steel that is high hardness, good toughness, strength and durable our blade sk5-42mm is imported from japan pvc pipe cutters is ideal for use on a variety of plastic pipe and tube the pipe cutter handle design lightweight, and the blade is thick and sharp make work easier and it process heat-treated to make the blade more sharp, durable and not easy to break at the same, it is not easy rusting. 【Wide application】 zantle tube cutter is ideal for use on a variety of plastic pipe and tube it is an awesome tool it is an essential cutting tool for your home handyman, plumbers, electricians, and vehicle mechanics the blade is as thick as 25mm the cutter is commonly used for cutting most kinds of plastic (pvc, cpvc, pp, pex, pe, rubber hose) and multilayer tubing cutting capacity is less than 1-5/8in (38mm) outer diameter. 【Easy to operate】tubing cutter built with comfortable, ergonomic, textured handles that provide a reliable grip spring-loaded handles allow for faster positioning of easy, single stroke cuts in the bottom of the tube cutter, there has a stainless buckle when you don’t use it, you can buckle the safe lock the tube cutter will become small to save space and it will also become portable, which is convenient for your work and life. 【Service & support】 zantle based service team makes you worry free after purchasing our product comes with a 1-year warranty against material defects and workmanship we promise a full refund if you are not satisfied with our products no questions asked. 【ergonomics design】 the professional tube cutter adopts ratchet drive technology to greatly save your strength powerful and do not require much strength to cut pipe the powerful bite force makes the work easier the fish handle is for added comfort, which guarantees long-lasting working the tube cutter can improve work efficiency by fast cutting user can cut pipe within 5 to 20 seconds, comfortable design for easy cutting and less hand fatigue.

 

PVC Cutter Ratcheting Pipe Cutters Cuts up to 2-12 Pipe Capacity Cutting Tool Ideal Pipe Cutter for Home Working and Plumbers

PVC Cutter, Ratcheting Pipe Cutters Cuts up to 2-1/2″ Pipe Capacity Cutting Tool. Ideal Pipe Cutter for Home Working and Plumbers

PVC Cutter, Ratcheting Pipe Cutters Cuts up to 2-1/2″ Pipe Capacity Cutting Tool. Ideal Pipe Cutter for Home Working and Plumbers - Durable aluminum construction and 40 thick manganese steel blade for long lasting the pipe cutter has an quick change blade designthis is a manual pvc cutting machine. Ergonomic grips on bottom handle, delivers fast and easy single stroke cuts, faster positioning with no ratcheting or twisting more convenient for using, reduces user fatigue. Maximum scope of cut 63mm cuts up to 2-1/2″ pipe capacity. Designed for cutting plastic (pvc, cpvc, pp, pex, pe, rubber hose) and multilayer tubing.

 

RIDGID 32900 Model 246 Soil Pipe Cutter 1-12-inch to 6-inch Chain Pipe Cutter

RIDGID 32900 Model 246 Soil Pipe Cutter, 1-1/2-inch to 6-inch Chain Pipe Cutter

RIDGID 32900 Model 246 Soil Pipe Cutter, 1-1/2-inch to 6-inch Chain Pipe Cutter - Pipe cutter has a 1-1/2-inch to 6-inch (40 mm to 150 mm) pipe capacity. Ratchet-action handle operates parallel to the pipe allowing for application in minimum width trenches. Compatible chain extension assembly (sold separately) can accommodate pipes up to 8-inches. Complete with hand guard to protect operator’s knuckles when cutting. Cuts 1-1/2-inch to 6-inch clay, cast-iron clay pipe or cement pipe and 4-inch class 22 water main.

 

Toledo Pipe H4S 2-4 Heavy Duty Hinged Pipe Cutter fits RIDGID REED Wheels

Toledo Pipe H4S 2″-4″ Heavy Duty Hinged Pipe Cutter fits RIDGID & REED Wheels

Toledo Pipe H4S 2″-4″ Heavy Duty Hinged Pipe Cutter fits RIDGID & REED Wheels - With only 4″ of clearance required around pipe makes using this cutter anywhere possible. A closed 360° frame forces all energy into cutting the pipe for maximum efficiency. Four cutting wheels make cutting steel, stainless steel, cast and ductile iron an easy job. All replacement wheels and parts available in stock. Guide fingers ensure perfect wheel alignment for square cuts.

 

QWORK Heavy Duty Pipe Cutter 1-inch to 3-inch Steel Pipe Cutter

QWORK Heavy Duty Pipe Cutter, 1-inch to 3-inch Steel Pipe Cutter

QWORK Heavy Duty Pipe Cutter, 1-inch to 3-inch Steel Pipe Cutter - Extra-large handle allows for quick and easy adjustments. Ideal for fast, clean pipe cutting by hand or power. Pipe cutter has a 1-inch to 3-inch pipe capacity. Features an extra-long shank that protects adjustment threads. Can be converted to 3-wheel cutter by replacing rollers with cutter wheel.

 

PEX Pipe Cutters for Cutting 18-1-inch PEX Tubings not for PVC Pipes

PEX Pipe Cutters for Cutting 1/8″-1-inch PEX Tubings, not for PVC Pipes

PEX Pipe Cutters for Cutting 1/8″-1-inch PEX Tubings, not for PVC Pipes - Spring loaded handle for quick opening/fast cutting. Cuts pex pipes from 1/8″-1″. Do not use to cut metallic pipes or cable wire. Makes straight clean burr-free cuts. Perfect for the diy home-owner or the professional looking for the perfect way to get started with pex plumbing.

 

ABN Mini Tube Cutter - 18in - 78in 3mm-22mm Tubing Cutter Close Quarter Copper Pipe Cutter Tool PVC Cutters

ABN Mini Tube Cutter – 1/8in – 7/8in (3mm-22mm) Tubing Cutter Close Quarter Copper Pipe Cutter Tool PVC Cutters

ABN Mini Tube Cutter – 1/8in – 7/8in (3mm-22mm) Tubing Cutter Close Quarter Copper Pipe Cutter Tool PVC Cutters - Perfect cutting capacity cut hard and soft copper, aluminum, brass, pvc, rubber, and plastic tubes and pipes with an outer diameter of 1/8 inch up to 7/8 inch (3mm to 22mm) tightening knob creates even pressure to help cut through metal piping quickly with little physical effort. Create clean cuts dual spinning rollers allow you to rotate materials inside the metal housing while the sharp cutting wheel slices your tube or pipe quickly and accurately simple one-handed control and pressure tightening knob allow you to provide even pressure all the way around for a seamless, smooth cut. Fits those tight spaces 15-inch (38 cm) height with 225 to 25-inch (57 to 64 cm) length makes this small pvc cutter hose cutter tool ideal for reaching pipes and tubes in tight and cramped spaces each package includes 1 close pipe cutter tool. Built to last constructed of heavy-duty materials, these metal and plastic pipe cutter tools are designed for strength, durability, and longevity simple one-piece slide with polished rollers is small and lightweight for easy use rollers feature grooves allow close-to-flare cuts. Compact plastic tubing cutters plumbers, electricians, mechanics, hvac servicemen, and construction workers often run into projects where cutting a small pipe or tube within an even smaller area is necessary easily slice through almost anything with the abn close quarters tubing cutter mini metal pipe cutters.

 

Tubing Cutter 18 to 1-38 Inch for Pipe Copper PVC Thin Stainless Steel Tube with Extra Blade and Reamer

Tubing Cutter 1/8 to 1-3/8 Inch for Pipe Copper PVC Thin Stainless Steel Tube with Extra Blade and Reamer

Tubing Cutter 1/8 to 1-3/8 Inch for Pipe Copper PVC Thin Stainless Steel Tube with Extra Blade and Reamer - Features the solid ergonomic x-cel knob provides a firm grip cutting tubes become a comfortable and quick task. Use it easily with user manual wostore’s products come with a lifetime warranty. Easily executes clean rounded cuts on copper, brass, aluminum,thin stainless steel,pvc,pe tubes from 1/8″-1-3/8″ (3-35mm) od. Nice workmanship, included a spare blade and fold-away deburrer ensures a better connect and durability. Well made of high-quality alloy steel grinding blades, extremely sharpthe body of the tubing cutter is made of lightweight,durable aluminum alloy casting.

 

RIDGID 23498 Model RC-1625 Ratcheting Plastic Pipe and Tubing Cutter 18-inch to 1-58-inch Pipe Cutter

RIDGID 23498 Model RC-1625 Ratcheting Plastic Pipe and Tubing Cutter, 1/8-inch to 1-5/8-inch Pipe Cutter

RIDGID 23498 Model RC-1625 Ratcheting Plastic Pipe and Tubing Cutter, 1/8-inch to 1-5/8-inch Pipe Cutter - Features an easily replaceable x-cel quick change blade. Designed for cutting plastic (pvc, cpvc, pp, pex, pe, rubber hose) and multilayer tubing. Ergonomic grips on bottom handle spaced at 1/2-inch increments, acting as a quick pipe measuring scale. Tubing cutter has a 1/8-inch to 1-5/8-inch (3 mm to 42 mm) outer diameter capacity. “Burr-less” cutting operation provides a square cut with less effort.

 

Steel Dragon Tools 74685 H6 Hinged 4in to 6in Pipe Cutter fits RIDGID and REED Wheels Cutting Wheels

Steel Dragon Tools 74685 H6 Hinged 4in. to 6in. Pipe Cutter fits RIDGID and REED Wheels Cutting Wheels

Steel Dragon Tools 74685 H6 Hinged 4in. to 6in. Pipe Cutter fits RIDGID and REED Wheels Cutting Wheels - Steel dragon tools h6 will accept compatible ridgid and reed cutting wheels. Pipe capacity 4 in to 6 in. Guide fingers ensure accurate wheel alignment for even cut. Steel dragon tools h6 will cut cast iron, ductile iron, and aluminum pipe. Full-closed frame for maximum efficiency under minimal effort.

 

Steel Dragon Tools 74227 H4 Hinged Pipe Cutter 2 - 4 Capacity Fits Reed Cutter

Steel Dragon Tools 74227 H4 Hinged Pipe Cutter 2″ – 4″ Capacity Fits Reed Cutter

Steel Dragon Tools 74227 H4 Hinged Pipe Cutter 2″ – 4″ Capacity Fits Reed Cutter - Steel dragon tools h4 will accept compatible reed cutting wheels. H4 will cut cast iron and ductile iron with steel dragon tools h4i  03122 cutter wheels. Full-closed frame for maximum efficiency under minimal effort. Guide fingers ensure accurate wheel alignment for even cut. H4 will cut cast iron and ductile iron with steel dragon tools h4i 03122 cutter wheels (included a.

 

Superior Tool 36878 ST-2000 Pipe Cutter-58 Inch to 2-18 Inch Pipe Cutter

Superior Tool 36878 ST-2000 Pipe Cutter-5/8 Inch to 2-1/8 Inch Pipe Cutter

Superior Tool 36878 ST-2000 Pipe Cutter-5/8 Inch to 2-1/8 Inch Pipe Cutter - Tubing capacity is 5/8″, 2-1/8″ and 1″ pipe. Tubing capacity 5/8″ to 2-1/8″ od. Cuts up to 1″ schedule 40 pipe and 2″ copper tubing,. Cuts and deburrs a wide variety of pipe and tubing. Tubing cutter wheeled can be replaced with item # 42348.

 

PVC Pipe Cutter Heavy Duty Ratcheting PEX Pipe and Tubing Cutter Tool 18-inch to 2-inch Tube Cutter

PVC Pipe Cutter, Heavy Duty Ratcheting PEX Pipe and Tubing Cutter Tool, 1/8-inch to 2-inch Tube Cutter

PVC Pipe Cutter, Heavy Duty Ratcheting PEX Pipe and Tubing Cutter Tool, 1/8-inch to 2-inch Tube Cutter - [ Instructions ], repeatedly press the handle to cut off the pipe after the end, each hand holds a handle and pulls it upward in a fan-shaped way to open the blade. [ Ingenious design ], high quality manganese alloy blades make it easier to cut off pipes ratchet drive not only ensures the smoothness of the incision but also greatly saves your strength. [ Max diameter ], cuts up to 2″ (external diameter) pipe capacity. [ use for ], cutting all kinds of rigid plastic pipes (pvc, cpvc, pp-r, pex, pe, etc). [ Non-slip ], humanized anti-skid handle design, protect hand and improve work efficiency.

 

AIRAJ PVC Cutter 2-12 in Ratchet-type Pipe Cutter for Cutting PVC PPR Plastic Hoses and Plumbing Pipes Suitable for Electrician and Woodworking Tools

AIRAJ PVC Cutter 2-1/2 in, Ratchet-type Pipe Cutter for Cutting PVC PPR Plastic Hoses and Plumbing Pipes Suitable for Electrician and Woodworking Tools

AIRAJ PVC Cutter 2-1/2 in, Ratchet-type Pipe Cutter for Cutting PVC PPR Plastic Hoses and Plumbing Pipes Suitable for Electrician and Woodworking Tools - Wide applicationthe tube cutter is commonly used for cutting most kinds of plastic (pvc, cpvc, ppr, pex, pe, rubber hose,ect) and multilayer tubing cutting capacity is up to 2-1/2 inch. Labor-saving gear driver, save strengththe ratcheting action allows for easy, one-hand cutting and blade release. Safe and convenient for you ratchet drive design makes sure auto-locking function in the process of cutting, which protects users away from hurt because blade bounces back because of the rubber handle the stainless buckle is not easily to slip off buckle the safe lock, the tube cutter will become small to carry or store. Ergonomics handle design rubber-made handle is comfortable and powerful which guarantee on long-lasting working. High quality the durable tube cutter is made of manganese steel and high-quality aluminum alloy that is high hardness, good toughness, strength and durable not easily to rust.

 

RIDGID 42878 Model 238-P Powered Soil Pipe Cutter 8-inch Chain Pipe Cutter

RIDGID 42878 Model 238-P Powered Soil Pipe Cutter, 8-inch Chain Pipe Cutter

RIDGID 42878 Model 238-P Powered Soil Pipe Cutter, 8-inch Chain Pipe Cutter - Easy to set up, the articulating outward facing chain hooks lay on the pipe to simplify latching. Features two directional operation that allows scoring of the pipe for a clean cut. Dual-powered tool operates using a 1/2-inch square drive impact driver or ratchet. Cuts up to 8-inch soil pipe when used with an impact driver (minimum 200-ft-lbs) or 4-inch pipe manually with the included ratchet. Compact, lightweight design allows tool to fit into tight places in overhead and below grade applications and easily mount in difficult places.

 

Gunpla Ratchet-Mechanism Plastic Pipe and PVC Cutter for Cutting 1-58 inch42mm PVC CPVC PEX PE PPR Pipes ideal for Plumber and Home Work

Gunpla Ratchet-Mechanism Plastic Pipe and PVC Cutter for Cutting 1-5/8 inch(42mm) PVC CPVC PEX PE PPR Pipes, ideal for Plumber and Home Work

Gunpla Ratchet-Mechanism Plastic Pipe and PVC Cutter for Cutting 1-5/8 inch(42mm) PVC CPVC PEX PE PPR Pipes, ideal for Plumber and Home Work - – diy and experts professionally produced, these pipe cutters are ideal for smoother cuts on pvc cpvc pex pe ppr rubber hose, and most non-metallic tubes., High leverage the pipe cutter has an easily replaceable blade which is designed and installed to cut up to, 1-5/8″/42mm od tubing high-leverage ratchet action cuts smoothly and with minimal effort., Fast cutting with our pvc cutting tool, you will be able to slice through pipes within seconds, creating straight and clean cuts this cutter gets the job done right providing utmost performance., Aluminum material gunpla heavy duty pipe cutter is fully made of high quality aluminum alloy and a 25mm thick 65mn steel blade with precision-ground cutting edge., Ergonomic handle with lock our pipe cutter ensures comfort with the fit handle, with a perfect ratchet drive technology, and faultless blade our plastic tube cutter is built to save your hands from cramps, proving fast and perfect cutting the pipe cutter for tubes features a lock on one side of the handle that helps manipulating and controlling the cutter.

 

RIDGID 68650 Model 206 Soil Pipe Cutter 1-12-inch to 6-inch Chain Pipe Cutter

RIDGID 68650 Model 206 Soil Pipe Cutter, 1-1/2-inch to 6-inch Chain Pipe Cutter

RIDGID 68650 Model 206 Soil Pipe Cutter, 1-1/2-inch to 6-inch Chain Pipe Cutter - Lightweight design and closer spacing of cutter wheels along with simple ratcheting action deliver a smooth cut on lighter wall pipe. Designed to effectively cut no hub soil pipe. Ratchet-action handle operates parallel to the pipe allowing for application in minimum width trenches. Comes complete with hand guard to protect operator’s knuckles when cutting. Soil pipe cutter has a 1-1/2-inch to 6-inch (40 mm to 150 mm) pipe capacity.

 

Tubing Cutter 14 Inch to 2-12 Inch Rachet Feed Mechanism Cut Pipe Copper PVC Steel Tube with Extra Blade and Reamer

Tubing Cutter 1/4 Inch to 2-1/2 Inch Rachet Feed Mechanism Cut Pipe Copper PVC Steel Tube with Extra Blade and Reamer

Tubing Cutter 1/4 Inch to 2-1/2 Inch Rachet Feed Mechanism Cut Pipe Copper PVC Steel Tube with Extra Blade and Reamer - 【Workmanship design】spare cutting wheel included in handle under snap-off cap fold-away deburrer ensures a better connect and durability. 【Durable material】well made of high-quality alloy steel grinding blades, extremely sharpthe body of the tubing cutter is made of lightweight,durable aluminum alloy casting. 【rachet feed mechanism】features the rachet feed mechanism speeds up cutting operation rachet release opens instantly to maximum size extra wide rollers with flare cut-off groove stabilize tubing. 【Application】easily executes clean rounded cuts on copper, brass, aluminum, thin stainless steel, pvc, pe, emt tubes from 1/4 to 2-1/2 inch(6-64mm) od tubing. 【Warranty】use it easily with user manual wostore’s products come with a lifetime warranty.

 

DEWILL Ratchet-type Pipe and PVC Cutter One-hand Fast Pipe Cutting Tool for Cutting1-58 inch PVC PPR Plastic Hoses and Pipe Suitable for Home Working and Plumber

DEWILL Ratchet-type Pipe and PVC Cutter, One-hand Fast Pipe Cutting Tool, for Cutting1-5/8 inch PVC PPR Plastic Hoses and Pipe, Suitable for Home Working and Plumber

DEWILL Ratchet-type Pipe and PVC Cutter, One-hand Fast Pipe Cutting Tool, for Cutting1-5/8 inch PVC PPR Plastic Hoses and Pipe, Suitable for Home Working and Plumber - 【High quality, exquisite craftsmanship】 durable pipe cutters are made of high-quality manganese steel with high hardness up to hrc52, good toughness and durability our blades are made of japanese teflon sk5-42mm material and are not easily broken after heat treatment, the blades are not easy to rust. 【Easy to use】the pipe cutter is made of rubber-textured handle, which is more comfortable to use, reliable to hold, and not easy to hurt at the bottom of the tube cutter, there is a stainless steel buckle for easy storage when you don’t use it, you can shrink the handles on both sides and lock the security lock to save space and prevent accidental injury. 【wide range of applications】the pipe cutter blade has a thickness of 25mm and is usually used for cutting most plastic (pvc, cpvc, pp, pex, pe, rubber hose) and multilayer pipes the maximum opening is 42mm after many tests,the cutting capacity up to 1-5 / 8 inches (42mm) outside diameter this is quite convenient for your work and life i think it is an essential cutting tool for home spare parts, plumbers, electricians and vehicle mechanics. 【Ergonomic design】the pipe cutting machine adopts the ratchet drive technology to smoothly complete the cutting operation with one hand, which makes cutting more labor-saving and improves work efficiency it also ensures automatic locking during the cutting process to protect the user from the rebound of the blade the handle adopts the principle of leverage, design lightweight. 【After-sales service】if you encounter any problems while using our products or are not satisfied with the products, please feel free to contact us the thinkwork after-sales team will contact you to resolve your issue in a timely manner.

 

RIDGID 32820 Model 2A Pipe Cutter fits RIDGID 33100 Renewed

RIDGID 32820 Model 2A Pipe Cutter fits RIDGID 33100 (Renewed)

RIDGID 32820 Model 2A Pipe Cutter fits RIDGID 33100 (Renewed) - Extra-long shank protects adjustment threads. This renewed product is tested and certified to look and work like new the refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. Fast pipe cutting for use with hand or on machine. Steel dragon tools renewed ridgid 32820 model 2a pipe cutter fits ridgid 33100. Capacity 1/8 in to 2 in.

 

Master Plumber 745122 58 To 2-18-Inch Large Pipe Tube Cutter

Master Plumber 745122 5/8 To 2-1/8-Inch Large Pipe Tube Cutter

Master Plumber 745122 5/8 To 2-1/8-Inch Large Pipe Tube Cutter - Long lasting construction. Master plumber 745122 large diameter tube cutter cuts 5/8″ to 2-1/8″ outer diameter tubing.

 

RIDGID 41317 Model E-3469 Tubing Cutter Replacement Wheel Pipe Cutter Wheel

RIDGID 41317 Model E-3469 Tubing Cutter Replacement Wheel, Pipe Cutter Wheel

RIDGID 41317 Model E-3469 Tubing Cutter Replacement Wheel, Pipe Cutter Wheel - Fits models 101, 103, 104, 117, 118, 150, 151, 152, 153, and 205 ridgid tubing cutters. Precision-machined cutting wheel is made from high-grade steel for superior durability. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. Includes 2 replacement wheels. Replacement pipe cutter wheel for aluminum and copper tubing.

 

RIDGID 34403 Press Snap Soil Pipe Cutter Chain Pipe Cutter And Cast Iron Pipe Cutter

RIDGID 34403 Press Snap Soil Pipe Cutter, Chain Pipe Cutter And Cast Iron Pipe Cutter

RIDGID 34403 Press Snap Soil Pipe Cutter, Chain Pipe Cutter And Cast Iron Pipe Cutter - Includes press snap soil pipe cutter, portable case and operator’s manual. Soil pipe cutter with the capacity to cut 1-1/2 inch to 4 inch no hub and service weight soil pipe, sizes are indexed for id (inner diameter). Chain pipe cutter compatible with ridgid standard series pressing tools (ct-400, 320-e, rp 330-b, rp 330-c, or rp 340). Eliminates the need to score the pipe unlike most pipe cutters due to the chain design and hydraulic power of the ridgid press tool with an easy grip and trigger action. Soil pipe cutter completes the cut in seconds without long, unruly lever arms.

 

RIDGID 32870 Model 42-A Heavy-Duty 4-Wheel Pipe Cutter 34-inch to 2-inch Steel Pipe Cutter

RIDGID 32870 Model 42-A Heavy-Duty 4-Wheel Pipe Cutter, 3/4-inch to 2-inch Steel Pipe Cutter

RIDGID 32870 Model 42-A Heavy-Duty 4-Wheel Pipe Cutter, 3/4-inch to 2-inch Steel Pipe Cutter - Comes equipped with 4 heavy-duty wheels. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. Features a short handle for easier use in confined areas. Pipe cutter has a 3/4-inch (20 mm) to 2-inch (50 mm) pipe capacity. Designed for work in areas where a complete turn is impossible.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.