Top 23 Best Galvanized Screws

 

5/8″ X 4″ Galvanized Screw Eye Bolt - Can be stained or painted. Made of unfinished cedar wood. 5/8″ x 4″ galvanized screw eye bolt. 3/4″ x 4-1/2″ galvanized screw eye bolt. Weight 019 lb.

 

(1) Forged Galvanized Screw Pin Anchor Shackle 1-1/2 - Fastener pro, build with confidence. Dacro offers corrosion protection without discoloring the wood (pollution-free coating). Specially designed to be used with pressure treated lumber (best if used with pilot holes). #8 x 1-1/2″ square drive decking screw, type 17 (with auger point), comparable to galvanized. Square recess driver size #2.

 

ORGILL BULK NAILS 00004172 Hot Galvanized Screw Siding Nail - Each and every nail is carefully hot galvanized and has a spiral shank. These high quality, orgill brand nails are perfect for even the most difficult projects. .

 

The Hillman GroupThe Hillman Group 40934 Bugle Head Phillips Galvanized Deck Screw 8 X 3 50-Pack - Easy and simple use kit. Galvanized screws. The product is manufactured in china. Coarse thread. Sharp point, bugle head. The product is 50pk 8×3 deck screw.

 

ORGILL BULK NAILS 00004152 Hot Galvanized Screw Siding Nail - These high quality, orgill brand nails are perfect for even the most difficult projects. Each and every nail is carefully hot galvanized and has a spiral shank. .

 

2″ Galvanized Screw Pin Anchor Shackle, WLL 35 Tons, Import - For use in industrial lifting, towing and tie-down applications. These shackles are imported. Murphy galvanized screw pin anchor shackles. Never exceed the working load limit . Galvanized, forged carbon steel, heat treated, with alloy pins, permanently marked with trade size and working load limit. Do not use screw pin shackles if the pin can roll under load and unscrew.

 

The Hillman GroupThe Hillman Group 40924 Bugle Head Phillips Galvanized Deck Screw 6 X 1-1/4 100-Pack - Galvanized screws. Sharp point, bugle head. The product is manufactured in china. The product is 100pk 6×1-1/4deck screw. Easy and simple use kit. Coarse thread.

 

Campbell T9640835 Galvanized Screw Pin Anchor Shackle, 1/2″ - Kit includes 28pc, 6 x12″ screw, 21pc, 10 x 1/2″ screw, 18pc, 8 x 3/4″ screw, 15pc, 8 x 1″ screw, 22pc, 8 x 5/8″ screw, 15pc, 10 x 1″ screw, 37pc, 6 x 5/8″ screw, 19pc, 10 x 3/4″ screw. Enjoy the sheet metal screws assortment, a variety of many useful sizes to meet your needs for different projects. Great kit for home, garage, and work, comes in a handy container fits neatly in kitchen and office drawers, hardware and craft cabinet. Campbell 1/2″ h/g,tagged shackle screw. Made from hardened steel, the threads create their own mating thread in pre-drilled holes.

 

CM M651AG Alloy Anchor Shackle with Galvanized Screw Pin, 5 Ton Work Load Limit, 5/8″ Size - Anchor shackles can be side loaded or used for multiple connections. Cm alloy shackles are designed with a 51 design factor and have a strength rating approximately 50% higher than a comparable-sized carbon shackle and about 25% stronger than super strong shackles. .

 

Screw Pin Anchor Shackles – 1-1/2″ anchor shackle galvanized screw pin - -Painted shackles are orange. . 490-m657g features -all shackle bodies and pins are forged from alloy steel, heat treated and tempered. Product type -clips and shackles. Generic specifications -ultimate strength equals 5 times working load limit. Dimensions overall product weight -17. -All shackles are marked with size (inches and millimeters) and working load limit in tons. 2 pounds. -Bolt, nut & cotter shackles have thread protected ends and are 100% proof tested.

 

1/2″ Screw Pin Anchor Shackle – 2 Ton – Galvanized - Made of steel, the anchor shackle is a durable accessory for nylon slings and polyester slings. Paired w/ a lifting sling, they help protect the eyes of your sling from wear & tear on clevis hooks. This clevis can be used in many applications such as industrial, agricultural & marine applications. Shackle diameter 1/2″ shackle pin size 5/8″. Break strength 12 ton working load limit 2 ton (stamped on the web shackle).

 

CM M652AG Alloy Anchor Shackle with Galvanized Screw Pin, 7 Ton Work Load Limit, 3/4 Size by CM - Cm m652ag alloy anchor shackle with galvanized screw pin, 7 ton work load limit, 3/4 size. Cm m647g super strong anchor shackle with galvanized screw pin, 1 ton work load limit, 5/16 size. This is a galvanized screw eye bolt. Use for tie downs. Use for eyebolt or rigging screws.

 

HP-HS12DSHD 3-1/4″ x .120 Hot Dip Galvanized Screw Shank - Qty 2000. Full round head plastic strip nails.

 

(1) Forged Galvanized Screw Pin Anchor Shackle 1 - Pin diameter 1-1/4″. Widest point 2-5/8″. Often used as a connector between anchor and anchor chain. 8-1/2 ton wll. (1) 1″ forged gavanized shackles w/ screw pins. Mouth opening 1-3/4″.

 

Simpson Strong-Tie ECCQ46-SDS2.5HDG 4 X 6 End Column Cap Hot Dipped Galvanized With Screws - Uplift loads have been increased for wind or earthquake with no further increase allowed reduce where other loads govern. 7. Down loads may not be increased for short-term loading and shall not exceed the post capacity. This product is a eccq46-sds2. 9. Structural composite lumber columns have sides that show either the wide face or the edges of the lumber strands/veneers. (Lag screws will not achieve the same load. Weld by designer. Ccq4. 5hdg 4 x 6 end column cap hot dipped galvanized with screws., General notes install simpson strong-tie sds 1/4″x 2-1/2″ wood screws, which are provided with the column cap. See post capacities for common post allowable loads. Eccq uses 14-sds screws into the beam and 14-sds screws into the post. Ccoq welded to steel column will achieve same load as ccq. Steel column width shall not be less than beam width. See technical bulletin t-sclcolumn for values on the narrow face (edge). 8. 5. 62 models assume a minimum 3 1/2″ wide post. Uplift loads do not apply to splice conditions. 10. 3. 4. Values in the tables reflect installation into the wide face. Beam depth must be a minimum 7″. ) Additional general notes 1. Spliced conditions must be detailed by the designer to transfer tension loads between spliced members by means other than the column cap. 2. 6. Column sides are assumed to lie in the same vertical plane as the beam sides. For 5 1/4″ engineered lumber, use ccq 6x or eccq 6x models.

 

Senco HK28ASBF 3-1/4 X .120 Screw Shank Hot Dipped Galvanized Coil Nail - This is a galvanized screw eye bolt. Use for tie downs. Use for eyebolt or rigging screws. Cm m652ag alloy anchor shackle with galvanized screw pin, 7 ton work load limit, 3/4 size. Cm m647g super strong anchor shackle with galvanized screw pin, 1 ton work load limit, 5/16 size.

 

5/16″ x 2-1/4″ Hot Dipped Galvanized Screw Eye Bolt - 24″ x 1 3/8″ galvanized with 18″ adjustable thread, will fit on 169″ and 1625″ od scaffolding. Weight 01 lb. This solid screw jack with socket and 18” stem is adjustable in height. 4 brand new 24″x 1-3/8″ solid galvanized screw jack with socket. This 24″ solid socket jack with 18″ adjustable thread will help you set your scaffold level.

 

CM M647G Super Strong Anchor Shackle with Galvanized Screw Pin, 1 Ton Work Load Limit, 5/16″ Size - Anchor shackles can be side loaded or used for multiple connections. Cm super strong shackles are carbon-type shackles with strength ratings that are 17 to 50% stronger than comparable-sized carbon shackles. As a result, these shackles are designed with a 61 design factor.

 

3/4″ X 4-1/2″ Galvanized Screw Eye Bolt - 3/4″ x 4-1/2″ galvanized screw eye bolt. Highly durable, lightweight and easy to use. Can be stained or painted. Weight 019 lb. Made of unfinished cedar wood.

 

(6) Forged Galvanized Screw Pin Anchor Shackle 1/2 - . Widest point 1-1/4″. Often used as a connector between anchor and anchor chain. 2 ton wll. Pin diameter 5/8″. (6) 1/2″ forged gavanized shackles w/ screw pins. Mouth opening 3/4″.

 

1/4″ X 2″ Galvanized Screw Eye Bolt - 5/16″ x 2-1/4″ galvanized screw eye bolt. Import china. Good for permanent or long term installations. 1/4″ x 2″ galvanized screw eye bolt. Galvanized carbon steel with alloy pin.

 

ACORN INTERNATIONAL SW-SS1234G250 Number-12 Stitch Galvanized Screw, 3/4-Inch by Acorn International - Fits a variety of applications. Door pull that’s ideal for use on screen, shed, barn and storm doors. Measures 6-1/2- by 1-3/4-inch (lxw). Acorn international sw-ss1234g250 number-12 stitch galvanized screw, 3/4-inch. Designed with rounded contours for enhanced handle comfort and appearance. Manufactured from cold-rolled steel. Made of durable steel with mechanically galvanized finish. Designed for general use. Screws included for installation. All screws included.

 

5/16″ X 2-1/4″ Galvanized Screw Eye Bolt - 5/16″ x 2-1/4″ galvanized screw eye bolt. Import china. Good for permanent or long term installations. Galvanized carbon steel with alloy pin. Stamped with trade size and working load limit.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.