Top 22 Starretts for 2020

 

Starrett B120A-6 Dial Caliper Stainless Steel Black Face 0-6 Range -0001 Accuracy 0001 Resolution

Starrett B120A-6 Dial Caliper, Stainless Steel, Black Face, 0-6″ Range, +/-0.001″ Accuracy, 0.001″ Resolution

Starrett B120A-6 Dial Caliper, Stainless Steel, Black Face, 0-6″ Range, +/-0.001″ Accuracy, 0.001″ Resolution - Rack teeth point down to keep foreign matter from clogging the gear. One hand use with the thumb-operated, fine adjustment roll. Hardened stainless steel bar, measuring surfaces, rack, gears, and depth rod. Knife-edge contacts for both inside and outside measurements. Precise dial graduations of 0001″, with one revolution equivalent to 0100″. Lock screw holds the sliding jaw in position, to ensure a consistent measurement. Sharp, clear dial graduations. Thumb-operated fine adjustment roll for one-handed use. Knife-edge contacts for inside and outside measurements. Black dial.

 

Starrett C19 Chrome Protractor

Starrett C19 Chrome Protractor

Starrett C19 Chrome Protractor - Double graduations from 0-180 degree in opposite directions permitting the direct reading of angles and supplementary angles. The back of the tool is flat for ease of use. The blade can be locked firmly at any angle by the lock nut. Double graduations from 0, 180 degrees in opposite directions permitting the direct reading of angles and supplementary angles. Satin chrome finish for ease of reading and resistance to rust.

 

Starrett C636EM-6 Spring Tempered Steel Rule With Inch And Millimeter Graduations 6 Length 19mm Width 12mm Thickness

Starrett C636EM-6 Spring Tempered Steel Rule With Inch And Millimeter Graduations, 6″ Length, 19mm Width, 1.2mm Thickness

Starrett C636EM-6 Spring Tempered Steel Rule With Inch And Millimeter Graduations, 6″ Length, 19mm Width, 1.2mm Thickness - Satin chrome finish for readability and rust resistance. Spring-tempered stainless steel body construction is fully flexible for durability and flexibility. Graduations in 32nds of an inch and half millimeters on one side and 64ths of an inch and millimeters on the opposite side are photo engraved for accuracy and staggered in a height pattern for readability. Precision rule with inch and millimeter graduations for measuring in woodworking, carpentry, and machining applications.

 

Starrett 79B-12 Spring Nut Outside Spring Caliper Steel Flat Leg 0-12 Range

Starrett 79B-12 Spring Nut Outside Spring Caliper, Steel, Flat Leg, 0-12″ Range

Starrett 79B-12 Spring Nut Outside Spring Caliper, Steel, Flat Leg, 0-12″ Range - Curved tips for transferring the measurement of the external size of an object. Threads of the spring nut engage with pressure and release when pressure is withdrawn, to save time in opening and closing. Bow spring is flexible yet strong to assure reliable measurements. Fulcrum stud is hardened. Made from high-grade steel. Centrally located adjustment to ensure smooth action. Quick-adjusting automatic-closing spring nut saves time. Legs made of flat stock. Legs made of flat stock for durability. Exceedingly strong bow spring.

 

Starrett 565B 4 Overall Length 1116 Pin Length 332 Pin Diameter Drive Pin Punch

Starrett 565B 4″ Overall Length, 11/16″ Pin Length, 3/32″ Pin Diameter, Drive Pin Punch

Starrett 565B 4″ Overall Length, 11/16″ Pin Length, 3/32″ Pin Diameter, Drive Pin Punch - The punch is made from hardened and tempered steel components that provide wear resistance and strength. Starrett company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. Pin punches are used to insert or knock out rivets and pins in assemblies. The l. It has a round shank, which is knurled for grip. The starrett 565b drive pin punch has a 4″ overall length with an 11/16″ pin length and a 3/32″ pin diameter to push pins and rivets into or out of a workpiece. S. The company, founded in 1880, is headquartered in athol, ma. They have a metal shank on one end and a metal pin driver on the other, and are typically tapped with a hammer.

 

Starrett 91C Tap Wrench 14 - 58 Tap Size 532 - 38 Square Shank Diameter 12 Body Length

Starrett 91C Tap Wrench, 1/4″ – 5/8″ Tap Size, 5/32″ – 3/8″ Square Shank Diameter, 12″ Body Length

Starrett 91C Tap Wrench, 1/4″ – 5/8″ Tap Size, 5/32″ – 3/8″ Square Shank Diameter, 12″ Body Length - Tempered gripping surfaces firmly hold square or round shanks. 12″ overall body length. Tap wrench body holds 1/4″ to 5/8″ taps with 5/32″ to 3/8″ square shank diameters and is used to tap workpieces (requires taps, not included). Plunger-type spring-operated knurled sleeve applies and removes the tap when pressure is applied.

 

Starrett 819 Hinge-Locating Automatic Center Punch With Adjustable Stroke 5 Length 58 Diameter

Starrett 819 Hinge-Locating Automatic Center Punch With Adjustable Stroke, 5″ Length, 5/8″ Diameter

Starrett 819 Hinge-Locating Automatic Center Punch With Adjustable Stroke, 5″ Length, 5/8″ Diameter - 015 in, blow force 1. 5 lb, single hand operation for hinge locating. Automatic center punch, length 5 in, body dia 5/8 in, number of pieces 1, aluminum handle, high carbon steel point, knurled, adjustable, replaceable point, point 0. 5, 5.

 

Starrett Exact KTX12-12ME-N ABS Plastic Case Red Measuring Pocket Tape EnglishMetric Graduation Style 12 35m Length 05 127mm Width 00625 Graduation Interval

Starrett Exact KTX12-12ME-N ABS Plastic Case Red Measuring Pocket Tape, English/Metric Graduation Style, 12′ (3.5m) Length, 0.5″ (12.7mm) Width, 0.0625″ Graduation Interval

Starrett Exact KTX12-12ME-N ABS Plastic Case Red Measuring Pocket Tape, English/Metric Graduation Style, 12′ (3.5m) Length, 0.5″ (12.7mm) Width, 0.0625″ Graduation Interval - Belt clips. Their ergonomic design fits comfortably in the hand and incorporate industry standard standout, and improved blade protection. Produced of high durability abs plastic for extended case life, these tape measures offer overmold for improved grip.

 

Starrett 93C T-Handle Tap Wrench 14 - 12 Tap Size

Starrett 93C T-Handle Tap Wrench, 1/4″ – 1/2″ Tap Size

Starrett 93C T-Handle Tap Wrench, 1/4″ – 1/2″ Tap Size - Wrench have a sliding handle that is frictionally held, the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. Starrett no 93 t-handle tap wrench is for holding taps, drills, reamers and other small tools to be turned by hand, it is properly heat treated to withstand ordinary shop use. The jaws conform to the tool being held, making it rigid and less apt to loosen. The body is centered, enabling the worker to use it on lathe centers or on an upright drilling machine to start the tap straight. Bodies is proportionately longer.

 

Starrett S579HZ Self Centering Telescoping Gauge With 2 Telescoping Arms Set 516- 6 Range 2-38 - 3-14 Handle Length 6 Pieces

Starrett S579HZ Self Centering Telescoping Gauge With 2 Telescoping Arms Set, 5/16″- 6″ Range, 2-3/8 – 3-1/4″ Handle Length (6 Pieces)

Starrett S579HZ Self Centering Telescoping Gauge With 2 Telescoping Arms Set, 5/16″- 6″ Range, 2-3/8 – 3-1/4″ Handle Length (6 Pieces) - Measuring range of 5/16 to 6″. Both plungers are easily locked at any desired setting. Constant spring tension gives uniform contact pressure. Ends of contacts are hardened and ground. Handles measure 2-3/8″ and 3-1/4″ in length. Handles are rigidly attached to the contact plungers and are automatically self-centering. Self-centering handles are rigidly attached to contact plungers. Set includes 6 gages with a range of 5/16″, 6″ and case. Two spring-tensioned telescoping plungers for uniform contact pressure. Set of six telescoping gauges for measuring holes, slots, and recesses in woodworking, metalworking, machining, layout, and pattern-making applications.

 

Starrett 120A-6 Dial Caliper Stainless Steel White Face 0-6 Range -0001 Accuracy 0001 Resolution

Starrett 120A-6 Dial Caliper, Stainless Steel, White Face, 0-6″ Range, +/-0.001″ Accuracy, 0.001″ Resolution

Starrett 120A-6 Dial Caliper, Stainless Steel, White Face, 0-6″ Range, +/-0.001″ Accuracy, 0.001″ Resolution - Precise dial graduations of 0001″, with one revolution equivalent to 0100″. Rack teeth point down to keep foreign matter from clogging the gear. Lock screw holds the sliding jaw in position, to ensure a consistent measurement. Knife-edge contacts for inside and outside measurements. Thumb-operated fine adjustment roll for one-handed use.

 

Starrett M1 Industrial Quality All-Purpose Lubricant 12 oz Case of 12

Starrett M1 Industrial Quality All-Purpose Lubricant, 12 oz. Case of 12.

Starrett M1 Industrial Quality All-Purpose Lubricant, 12 oz. Case of 12. - Removes grease, tar and grime from metal parts and painted surfaces. Deep-down penetration works quickly to free frozen nuts, bolts and metal parts. Silicone free making m1 an excellent lubricant. Cleans and polishes for lasting protection. Stands up to extreme temperatures making it ideal year-round.

 

Starrett XA2 Quick-Hitch Arbor with Carbide Tipped Pilot Drill

Starrett XA2 Quick-Hitch Arbor with Carbide Tipped Pilot Drill

Starrett XA2 Quick-Hitch Arbor with Carbide Tipped Pilot Drill - Fits hole saws from 1 1/4″ to 8 9/32″. 7/16″ hex shank for use in 1/2″ chucks. Quick-hitch arbors enable instant change outs of hole saws without additional tools and without removing the arbor from the chuck. Set screw in body allows for easy replacement of the pilot drill. Carbide tipped pilot drill.

 

Starrett 565A 4 Overall Length 916 Pin Length 116 Pin Diameter Drive Pin Punch

Starrett 565A 4″ Overall Length, 9/16″ Pin Length, 1/16″ Pin Diameter, Drive Pin Punch

Starrett 565A 4″ Overall Length, 9/16″ Pin Length, 1/16″ Pin Diameter, Drive Pin Punch - The l. The punch is made from hardened and tempered steel components that provide wear resistance and strength. S. Starrett company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. They have a metal shank on one end and a metal pin driver on the other, and are typically tapped with a hammer. The starrett 565a drive pin punch has a 4″ overall length with a 9/16″ pin length and 1/16″ pin diameter to push pins and rivets into or out of a workpiece. Pin punches are used to insert or knock out rivets and pins in assemblies. The company, founded in 1880, is headquartered in athol, ma. It has a round shank, which is knurled for grip.

 

Starrett CB24-4R Combination Square Blade With Inch Graduations Sets And Bevel Protractors Satin Chrome Finish 6R Graduation 1 Width 332 Thickness 24 Size

Starrett CB24-4R Combination Square Blade With Inch Graduations, Sets And Bevel Protractors, Satin Chrome Finish, 6R Graduation, 1″ Width, 3/32″ Thickness, 24″ Size

Starrett CB24-4R Combination Square Blade With Inch Graduations, Sets And Bevel Protractors, Satin Chrome Finish, 6R Graduation, 1″ Width, 3/32″ Thickness, 24″ Size - Combination square blade, number of pieces 1, blade length 24 in, graduation type 4r, graduations 8ths/16ths/32nds/64ths, blade material hardened and tempered steel, satin chrome blade finish.

 

Starrett C604RE-6 Spring Tempered Steel Rule With Inch Graduations 6 Length 34 Width 364 Thickness

Starrett C604RE-6 Spring Tempered Steel Rule With Inch Graduations, 6″ Length, 3/4″ Width, 3/64″ Thickness

Starrett C604RE-6 Spring Tempered Steel Rule With Inch Graduations, 6″ Length, 3/4″ Width, 3/64″ Thickness - Steel rule, spring tempered, construction hardened and tempered tool steel, graduation type 4r, graduations 64ths, 32nds, 8ths, 16ths, length 6 in, width 3/4 in, satin chrome finish, markings c604re-6, end graduations.

 

Starrett 166A Pin Vise With Insulated Octagonal Handle 0-0040 Range

Starrett 166A Pin Vise With Insulated Octagonal Handle, 0-0.040″ Range

Starrett 166A Pin Vise With Insulated Octagonal Handle, 0-0.040″ Range - Insulated pvc handle protects user from shock. Tapered collet provides maximum clamping surface. 1-25/32″ handle length and 3″ overall length (with chuck closed). Pin vise securely holds workpieces up to 0040″ (1 mm) in diameter including small stock, taps, drills, reamers, scribers, wire, small files, and other tools. Octagonal-shaped handle prevents tool from rolling when set down.

 

Starrett 10H-6-4R Cast Iron Square Head Student Combination Square 4R Graduation 6 Size

Starrett 10H-6-4R Cast Iron Square Head Student Combination Square, 4R Graduation, 6″ Size

Starrett 10H-6-4R Cast Iron Square Head Student Combination Square, 4R Graduation, 6″ Size - A rugged, cast iron square head that will outlast cheap plastic and die-cast imitations. Graduation no 4r, 1/8″, 1/16″, quick reading 1/32″, 1/64″. An accurate, hardened and tempered square blade offered. Reversible lock bolt allows the blade to be turned over or end-for-end so that all four graduated edges may be used.

 

Starrett 270 716-Inch by 6-14-Inch Taper Gage Inch and Millimeter Graduation

Starrett 270 7/16-Inch by 6-1/4-Inch Taper Gage Inch and Millimeter Graduation

Starrett 270 7/16-Inch by 6-1/4-Inch Taper Gage Inch and Millimeter Graduation - Accurately tapered throughout its entire length. 0001″ graduations from 010 to 150″ on one side and 005mm graduations from 03 to 4mm on the other side. Taper gauge for measuring hole and slot sizes. Measures 7/16 x 6-1/4 inches/11 x 160mm (w x l). Reverse side graduated ffrom03mm to 4 mm. Made from quality tool steel 7/16″ wide by 6 1/4″ long. Steel body for durability and long life. One side graduated from 010″ to 150″.

 

Starrett 70BX Pocket Scriber With Carbide Point 2-78 Point Length 38 Handle Diameter

Starrett 70BX Pocket Scriber With Carbide Point, 2-7/8″ Point Length, 3/8″ Handle Diameter

Starrett 70BX Pocket Scriber With Carbide Point, 2-7/8″ Point Length, 3/8″ Handle Diameter - Hexagon head prevents rolling. Handle is of steel, knurled, and nickel plated. Scriber point is carbide, properly hardened.

 

Starrett 98-6 6-Inch Precision Machinists Level

Starrett 98-6 6-Inch Precision Machinists Level

Starrett 98-6 6-Inch Precision Machinists Level - Ground and gradated main vial. Precision machinists’ level with a graduation of 042 mm/m, or 80-90 seconds. Made from high-quality seasoned cast iron. 1-year manufacturer’s warranty. Involute groove along the base provides reliable seating when leveling round items. Cross test vial allows simultaneous leveling in both directions. Cross-test vial enables simultaneous leveling in two directions for precise measurements. Ground glass main vial is graduated, and adjustable to a positive setting, for accurate results. Accurate and reliable machinist’s level. Cast iron base for increased durability.

 

Starrett EC799A-12300 Electronic Caliper Stainless Steel 0-12 Measuring Range 00005 Resolution Black

Starrett EC799A-12/300 Electronic Caliper, Stainless Steel, 0-12″ Measuring Range, 0.0005″ Resolution, Black

Starrett EC799A-12/300 Electronic Caliper, Stainless Steel, 0-12″ Measuring Range, 0.0005″ Resolution, Black - The ec799 offers a slim, streamlined profile, a large, clear, easy-to-read lcd display, long battery life and function buttons for zero and inch/mm. The starrett ec799 series electronic caliper is light, comfortable, easy-to-use, and constructed with features that have made starrett slide calipers the machinist’s first choice for many years. Electronic caliper, 0-12″ (0-300 mm) without output and with plastic case.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.