Yonico 14190q T-Slot Cutter Router Bit for 3/8-Inch Hex Bolt Heads 1/4-Inch Shank
- Build-up and heat resistant teflon coating. Build-up & heat resistant teflon coating. C3 micro-grain tungsten carbide cutters. Industrial quality router bits. Solid hardened steel bodies with anti-kickback design. Satisfaction guaranteed and lifetime warranty. Satisfaction guaranteed & lifetime warranty.
Yonico 14191q T-Slot Cutter Router Bit for 10mm Hex Bolts with 1/4″ Shank
- Satisfaction guaranteed & lifetime warranty. Build-up & heat resistant teflon coating. C3 micro-grain tungsten carbide cutters. Industrial quality router bits. Solid hardened steel bodies with anti-kickback design.
Magnate 1107 Slot Cutter Router Bits – 1/8″ Cutting Length; 3/8″ Cutting Depth; 1/2″ Shank Diameter
- It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is suited for softwoods, hardwoods, chipboard, plywood and etc. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is also equipped with wide open gullets for easy disposal of wood chips. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. You may try the following suggestion. In case a bit doesn’t come with a speed chart. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage.
Slot Cutter Router Bit Set – SHK 1/4 | 7 Piece
- I m p o r t a n t select size above based on legend below. Shk = shank size. 100% satisfaction guaranteed.
Magnate 1109 Slot Cutter Router Bits – 1/4″ Cutting Length; 3/8″ Cutting Depth; 1/2″ Shank Diameter
- Excessive overall length may cause tool damage. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. In case a bit doesn’t come with a speed chart. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is also equipped with wide open gullets for easy disposal of wood chips. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. It is suited for softwoods, hardwoods, chipboard, plywood and etc. You may try the following suggestion. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application.
Magnate 1141 Slot Cutter Router Bits, with Top Mounted Bearing – 7/32″ Cutting Length
- It is suited for softwoods, hardwoods, chipboard, plywood and etc. It is also equipped with wide open gullets for easy disposal of wood chips. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Excessive overall length may cause tool damage. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications.
Freud 63-108 Slot Cutter Router Bit Set, 2″ X 1/8″
- Includes three wing slotting cutter, arbor and ball bearing, cuts all composition materials, plywoods, hardwoods, and softwoods, use on hand-held and table-mounted portable routers, producing slots and grooves for t-molding, spline joints, tongue and grove joints and other application. Highlights size 2″ x 1/8″ with 1/4″ shank depth 9/16″ over lenth 2-3/8″.
MLCS 8371 Stackable Adjustable Slot Cutter Router Bit Set with 1/2″ Shank
- Cut grooves for dadoes, tongue and groove joints, rabbets, or biscuit joints. 6 slot cutters, shims, bearing, and 1/2″ arbor included. Cuts almost any groove size from 1/16″ to 11/16″. Mlcs quality. Wood storage box included.
EnPointâ„¢ Teflon Coating Carbide Single Flute Straight Flush Tim Bit 1/4″ Shank 5/32″ Cut Dia 25/64″ Cut Height CNC Flakeboard Plywood Dado Plunge Router Bit Woodwork Grooving Slotting Cutter
- Plunging tight corners and confined areas, sign-making, routing letter edges. Carbide-tipped cutting edge for a tendency to stay sharper and clean edge. Teflon painting on the tool bit for preventing stickness, thus easier and smoother chip evacuation. Medium carbon steel shank and hss main body for for high hardness, great resistance to heat and wear. For straight and square cuts, making dadoes and grooves.
T-Slot Cutter Router Bit for 1/4″ Hex Bolt – 1/4″ Shank – Yonico 14190q
- 21/32″ cutting height 3/8″ shank diameter 1-1/2″ shank length. Description great for your custom jig creations, the yonico 14190q t-slot router bit cuts t-slots f.
Magnate 6069 Slot Cutter Router Bits, For Demountable Hinge – 5/64″ Radius; 1-19/32″ Large Diameter
- This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. You may try the following suggestion. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Excessive overall length may cause tool damage. It is also equipped with wide open gullets for easy disposal of wood chips. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is suited for softwoods, hardwoods, chipboard, plywood and etc. In case a bit doesn’t come with a speed chart. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning.
Timberline TRS-310 Multi 3-Wing 1/2-Inch Slot Cutter Router Bit Set
- 1/2-inch shank. For producing slots 1/8-inch to 1-1/8-inch thick. Includes timberline and reg bits with kerfs of 1/8-inch, 5/32-inch, 3/16-inch and 1/4-inch includes 1/2-inch arbors and sealed bearings for depth control. Custom-made hardwood storage case included. Carbide tipped, professional quality.
Yonico 14191q T-Slot Cutter Router Bit for 10mm Hex Bolts with 1/4 Shank by Yonico
- Industrial quality router bitsc3 micro-grain tungsten carbide cutterssolid hardened steel bodies with anti-kickback designbuild-up & heat resistant teflon coatingsatisfaction guaranteed & lifetime warranty.
Magnate 1105 Slot Cutter Router Bits – 3/8″ Cutting Length; 3/8″ Cutting Depth; 1/4″ Shank Diameter
- It is also equipped with wide open gullets for easy disposal of wood chips. In case a bit doesn’t come with a speed chart. Excessive overall length may cause tool damage. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is suited for softwoods, hardwoods, chipboard, plywood and etc. You may try the following suggestion. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits.
Magnate 1110 Slot Cutter Router Bits – 5/16″ Cutting Length; 3/8″ Cutting Depth; 1/2″ Shank Diameter
- This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Excessive overall length may cause tool damage. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. In case a bit doesn’t come with a speed chart. You may try the following suggestion. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications.
YaeTek T-Slot Cutter Router Bit for 3/8-Inch Hex Bolt Heads 1/4-Inch Shank
- Precise, designer profiles create smooth and detailed cuts, perfect for projects of any level of complexity. Our router bits are manufactured using solid hardened steel and c3 micro grain carbide. Our bits are the preferred choice of professionals and hobbyists alike. (C3 grade carbide is the highest grade used in the router bit industry) the result is a highly durable bit that can be utilized for the most rigorous industrial applications.
uxcell 1/2 Inch x 5/32 Inch CNC Engraving 4-Flute T-Track Slotting T-Slot Router Bit Cutter
- Overall length 405mm / 16″ product name t-slot router bit. Package content 1 x t-slot router bit, 1 x case main color red, silver tone. Standard 1/2″ x 5/32″ cutting width 94mm / 037″. Material tungsten carbide weight 60g. Cutting dia 32mm / 126″ cutting depth 5/32″ shank dia 1/2″.
Magnate 1145 Slot Cutter Router Bits, with Top Mounted Bearing – 5/32″ Cutting Length
- Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is suited for softwoods, hardwoods, chipboard, plywood and etc. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is also equipped with wide open gullets for easy disposal of wood chips.
Woodtek 921537, Router Bits, Slot Cutters, 1/8″ 4-Wing Slot Cutter Only, 5/16″ Bore
- Micro-grain carbide cutting surfaces have been diamond honed to 800 grit for minimal tear-out and smoother surface quality. Woodtek® carbide-tipped three and four wing slot cutter router bits cut precision slots for spline joints, t-molding and other applications, use with hand-held and table-mounted portable routers (1/4″ and 1/2″ arbors fit only woodtek® slot cutters) rugged ptfe (polytetrafluoroethylene) briteviewâ„¢ coating not only protects but the bright yellow color provides better visibility for safer operations. Imported. Manufactured in facilities meeting stringent iso 90002000 quality assurance standards. Large selection of complete bits or component parts. 001″ tolerances and dynamic balancing help ensure vibration-free operation. Positive shear angle places less demand upon your routing equipment. Cnc-machining to +/-0.
XNEMON 1/4 Inch Shank T-Slot Cutter Router Bit Steel Handle For Woodworking Architectural Molding Router Milling Bit 45mm
- Total length45mm, shank diameter635 mm(1/4inch), blade diameter5mm, cutting width6mm. Suitable for mdf, solid wood, mdf, particle board, plywood, wooden door frames , wooden window frames , cabinets and boxes,etc. Hook & shear angles high hook & shear angles allow cutters to slice smoothly into stock producing clean, splinter free. Sharp edge,high hardness,accurate positioning,high precision,smooth cutting,impact resistance,high toughness. Material yg6x native alloy, blade industrial grade micro grain carbide.
Irwin Tools 1900984 Marples 3-Wing Slot Cutter Router Bit with 1/8″
- Designed for use with irwin marples slot cutter arbors. Perfect router bits for grooving t-moldings, spline joints, tongue and groove joints, and many other applications. Creates perfect flat-bottomed cuts. Extended life, flawless finish. 3-wing carbide tipped slot cutter router bit woodworking tool cuts smooth 1/8 inch slots.
Magnate 1102 Slot Cutter Router Bits – 3/16″ Cutting Length; 3/8″ Cutting Depth; 1/4″ Shank Diameter
- Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Excessive overall length may cause tool damage. It is also equipped with wide open gullets for easy disposal of wood chips. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. You may try the following suggestion. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. In case a bit doesn’t come with a speed chart.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
