Top 22 Best Vise Vises

 

Vise Pads / Vise Jaws Pads (Magnetic Multi-Groove Design) – 4.5 Inch Length, TPU – Fit Wide Array of Vices - Multi-groove design provides a number highly useful holding slots to keep items in place 90 degree angles for widths of approximately 1/16″, 1/8″, 1/4″ and 3/4″ 60 degree angle for width of approximately 13/32″. Made from high-quality thermoplastic polyurethane (tpu), our inserts are hard enough to hold items in place but soft enough to protect finished, anodized or delicate surfaces from scratching, damage or marring tpu resists oil, grease and abrasion. Strong embedded magnets keep vice jaws / vice jaw pads securely in place 45-inch length provides compatibility with vises of various sizes (better to have vise jaws too short than too long). Product includes one set of vise jaw pads (2 pads) compatible with a wide array of vise styles, including bench vise / bench vice, drill press vise / drill vise, mill vise / milling vise, machinist, table, woodworking and shop. Our magnetic vise jaws pads / inserts are ideal for holding wood, metal, plastic, tubing, threaded items, and virtually anything else in your vise, round, flat or irregular vise pads are very useful for anyone making jewelry or gunsmithing.

 

HFS (R) 4″ QUICK GRIP DRILL PRESS VISE VISES DRILLS HARDENED - Size 4″ jaw opening 4″ jaw height 1-1/4″ recessed parallel jaw inserts hardened and ground bars and locking mechanism easy setting by sliding steel bar, clamping pressure adjustable clamping force 200-800 lbs weight 10 lbs.

 

Bessey BVHW45 Homeowners Bench Vise - Jaw opening 4-1/2-inch. Jaw width 4-1/2-inch. Holds up to 1-inch diameter pipes and tubes. Home work shop vise with jaws for holding flat materials as well as pipes and tubes. Swivel base allows rotating the vise 270 for vesratility.

 

IRWIN Woodworker’s Vise, 6 1/2″, 226361 - Square body seating for easy under-bench mounting. Toe-in toward top jaws helps ensure firm grip on workpiece. Provision for installing wooden cheeks to protect work pieces. 4-1/2″ jaw capacity perfect for light duty woodworking tasks. Crated of forged iron for long-lasting durability.

 

EnPointâ„¢ DIY Precision Drilling Holes Pin Vise Woodworking Hand Drill for Model Resin Jewelry Walnut Amber Beeswax Olive Nut Buddha Beads Ivory Nut Plastic with 10 pcs Twist Drill Bits - Available for holding small drills, deburrers, wires, files, reamers also use it to hand drill out the extruder on the 3d printer when it was jammed package include 1 x hand drill 10pcs twist drill bits. It feels good in the hand and has a 3-jaw hardened steel keyless chuck, so you don’t have to bother with swapping out collets. The adjustable gripping diameter of this hand drill is 02-34mm (1/64–9/64 inches) holds very fine drills bits much more snug than the collet vises. Works great for precision drilling and tapping, electronic assembling, tool-making, hole punching, jewelry engraving, models and mininatures and hobbies. It’s mainly used for the materials of wood, resin, jewelry, walnut, amber, beeswax, olive nut, vajra bodhi, buddha beads, ivory nut, pvc, acrylic and plastic etc.

 

Kurt D50-33A Hardened Vise Step Keys (Pack of 2) - Hardened vise keys are used to align your vise to your milling machine table. . Standard keys are used when they are the same. Step keys are used when the keyway in the vise is different than that of the machine “t” slot.

 

Ridgid 40220 Straight Pipe Welding Vise - This product manufacture by united states. This item is 40220 vise, 461 straight welding. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. Made of durable performance-proven material and designed to resist strain, heat and warpage during tacking. This product is used for pin-vises. Machined swivel nuts and pins, together with special chain screws, give smooth and trouble-free assembling of the vise onto pipe. Model #461. Capacity 1/2-inch to 8-inch.

 

Yost WV-7HD Heavy Duty Corner Welding Vise, 7″ - Two-way swivel mounted spindle automatically adjusts the clamping block to work pieces of different thicknesses. Holds work pieces at a 90-degree angle. 60,000 psi ductile iron castings for increased clamping strength. Unobstructed working area allows free access for welding or assembly operations and through-ways for t joints. Copper screw is spatter resistant.

 

ToolUSA Hand-held Hobby Mini Vise 4″: VISE-03064 - With adjustable wing nut closure, turning wingnut opens and closes the jaw. Jaw opens to approximately 1 inch, jaw itself is 1-3/8 inches long. Overalll length from top to bottom, 425 inches, hand holding area is a little less than 25″. Clamp will leave your hands free to do your work. Carbon steel construction for dependable use clamping area has texture for more secure grip.

 

HFS (TM) Brand 5″ Heavyduty Bench Vise Anvil Forged.360 Swivel Locking Base Desktop Clamp (16LBS) , HFS Blue Design - Replaceable, hardened, forged steel jaws. Double locking swivel base. Power serrated steel jaws and clamps for great grip and strength. Incredible clamping power. Durable cast steel construction.

 

IRWIN Tools Record Replacement Jaw Plates and Screws for No. 8 Mechanic’s Vise (T8D) - Irwin tools record replacement jaw plates and screws for no. Jaw plates are fully machined on all load-bearing surfaces. 8-inch plates fit #8 mechanics vises. Jaws are made from hardened steel. 8 mechanic’s vise (t8d). Use to replace worn parts on a mechanics vise.

 

IRWIN Tools Record Replacement Main screw for No. 3 Mechanics Vise (T3C) - The fused steel handle is made to bend before the vise can be overstressed. Main screw is made from machined steel with a rolled 2-start acme thread for wear-resistance and smooth operation. Includes main screw, handle, nut, pin, spring, and washer. Use to replace worn parts on a mechanics vise.

 

IRWIN Tools Record Replacement Jaw Plates and Screws for No. 5 Mechanic’s Vise (T5D) - 5 mechanic’s vise (t5d). Jaws are made from hardened steel. Use to replace worn parts on a mechanics vise. Jaw plates are fully machined on all load-bearing surfaces. Irwin tools record replacement jaw plates and screws for no. 5-inch plates fit #5 mechanics vises.

 

Yost Vises 865-DI 6.5″ Heavy Duty Reversible Bench Vise Made in USA - Pipe jaws are serrated for enhanced grip and can be replaced when worn. Bench vise with swivel base has a 65″ jaw width to grip a flat surface and provide clamping action for medium-duty applications, and has a reversible front jaw that expands the jaw opening from 7″ to 11″ for larger applications. Ductile iron body is durable and strong for extended life, and has two flat portions that act as an anvil and additional work surface. 360-degree swivel base adjusts the direction of the jaws for proper placement and locks in place. Top jaws are replaceable and reversible, with a serrated surface on one side for enhanced grip and a smooth side on the other for handling delicate items.

 

IRWIN Drill Press Vise, 4″, 226340 - . Crafted of forged iron for durability with textured 4″ jaws that grip securely, this lightweight and portable drill press has a 4-1/2″ jaw capacity and is perfect for light duty tasks. The irwin drill press vise features a slotted base for easy installation and positioning.

 

Shop Fox D4074 5-Inch Multi Purpose Bench Vise - Base swivels for greater versatility and there’s even an anvil face to top it all off. Jaws rotate 360 degrees for unlimited workpiece positioning and holds flat stock as well as round stock with the built in pipe jaws. This multi-purpose vise does it all. Weighs 50 lbs.

 

IRWIN Tools VISE-GRIP Original Locking Wrench with Wire Cutter (item #8) - Heavy-duty jaws lock on to three sides of a hex fastener, and won’t slip or mark the work piece. Guarded trigger gives you a quick release while helping prevent accidental release. Adjust pressure and work fit with turn screw that stays adjusted for repetitive use. Backed by the irwin lifetime guaranteelength is 4″. Built-in wire cutter means you don’t have to switch tools constructed of high-grade heat-treated alloy steel for maximum toughness and durability.

 

IRWIN Tools Record Replacement Jaw Plates and Screws for No. 3 Mechanic’s Vise (T3D) - Jaw plates are fully machined on all load-bearing surfaces. Irwin tools record replacement jaw plates and screws for no. Jaws are made from hardened steel. 3 mechanic’s vise (t3d). 4-inch plates fit the #3 mechanics vise. Use to replace worn parts on a mechanics vise.

 

SE 8436MVC 3″ Universal Table Vise - The width of the vise jaws are 3 inches and span open for a length of 2 inches. A vise is a mechanical apparatus used to secure an object to allow work to be performed on it. Se is committed to providing the customer with the best source for value possible on the market. Important avoid getting counterfeit items. Vises have two parallel jaws (one fixed and the other movable) threaded in and out by a screw and lever. Genuine se products come with our se logo on the packaging. This tool was crafted with high quality materials to ensure that se’s table vise will be the only one you need for all your woodworking, metalworking and many other material-handling needs. Se is a registered trademark protected by us trademark law. Se is very proud to bring you this 3″ universal table vise, featuring a rotation of 360 degrees and a tilt of 45 degrees. Se products are quality items for extremely reasonable prices. This aluminum table vise is designed to be lightweight yet durable enough to tackle the toughest of projects. You will enjoy the quality, function and usefulness this 3″ universal table vise has to offer. These jaws are padded with rubber soles to comfortably secure your item in the vise.

 

IRWIN Heavy-Duty Workshop Vise, 6″, 226306ZR - Weighs 306 lbs to provide a reliable base. Anvil and pipe jaws incorporated for a sturdy grip. Aggressive steel jaws maintain a secure hold on clamped materials. Captured safety jaw prevents slide from falling out during heavy-duty use. Swivel base maneuvers into position quickly and easily.

 

IRWIN Tools Record Replacement Jaw Plates and Screws for No. 6 Mechanic’s Vise (T6D) - Jaws are made from hardened steel. Irwin tools record replacement jaw plates and screws for no. Use to replace worn parts on a mechanics vise. 6 mechanic’s vise (t6d). 6-inch plates fit #6 mechanics vises. Jaw plates are fully machined on all load-bearing surfaces.

 

5″ ENGRAVING BLOCK Ball Vise Setting Jewelry w/ Pins Rubber Base - Weight 155 lbs. Quantity 1 overall dimension 5-1/8” x 5-1/8″ x 6-1/2″. Heavy duty rubber base 2 sides vise key. Block size 5”. Engraving block.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.