(1000pcs) 3/8″-16×1/2″ Socket Set Screw, Cone Point, Nylon Patch, Alloy Steel, Thermal Black Oxide, (inch), Size: 3/8″-16, Length: 1/2″, Coarse Thread (UNC), RoHS
- Cone point a set screw with a sharp conical-shaped point at the opposite end from the hexagonal drive. Cone point for permanent setting on soft or hardened shafts the deep penetration it offers gives this style set screw the highest tor-sional & axial holding power for shafts of rockwell hardness c15 or over, spot point half its depth. Can also be used as a pivot or hanger. #N/a.
(1000pcs) 1/4″-20×1/2″ Socket Set Screw, Flat Point, Nylon Patch, Alloy Steel, Thermal Black Oxide, (inch), Size: 1/4″-20, Length: 1/2″, Coarse Thread (UNC), RoHS
- It is a color of the base metal, which neither removes nor deposits metal therefore it adds, at the most, 5 to 10 millionths of an inch to the fastener’s dimensions. Also, the item maintains 99% of its conductivity making black oxide a popular finish for electrical parts. However, parts with a black oxide finish will not suffer from white corrosion, which can occur over time with electro-plated parts. Black oxide finish is a conversion coating (not an applied coating) because it results from a chemical reaction with the iron present in the metal fastener and forms and integral protective surface. The post-treatment oil application offers good indoor corrosion protection, but a zinc-plated part is more resistant to rust. To avoid the risk of white corrosive particles (which can cause electrical shorts) many in the electronics industry opt for black oxide instead of zinc plated fasteners. Typically, the oil after-finish is dry to the touch, which gives the part a lustrous appearance and improved lubricity without excessive residue. In addition to being used for decorative purposes, the finish reduces light glare and reflection, and makes the surface of the fastener smoother. The popularity of black oxide stainless fasteners is also growing. One of the most important advantages of black oxide is that there is almost no risk of hydrogen embrittlement because the process does not involve electro-plating nor does it require an acid-activation. The color is a deep black rather than the grayish-black appearance of a black phosphate, and remains consistent at temperatures as high as 900ºf. When a black oxide finish is specified, it is interpreted as “black oxide and oil”. Black oxide neither enhances nor detracts from a fastener’s resistance to corrosion. Likewise, it cannot chip, peel or rub off. Black oxide also resists abrasions better than phosphate.
(1500pcs) 5/8″-11×1/2″ Socket Set Screw, Cup Point, Alloy Steel, Thermal Black Oxide, (inch), Size: 5/8″-11, Length: 1/2″, Coarse Thread (UNC), RoHS
- When a black oxide finish is specified, it is interpreted as “black oxide and oil”. The color is a deep black rather than the grayish-black appearance of a black phosphate, and remains consistent at temperatures as high as 900ºf. Typically, the oil after-finish is dry to the touch, which gives the part a lustrous appearance and improved lubricity without excessive residue. Black oxide neither enhances nor detracts from a fastener’s resistance to corrosion. One of the most important advantages of black oxide is that there is almost no risk of hydrogen embrittlement because the process does not involve electro-plating nor does it require an acid-activation. However, parts with a black oxide finish will not suffer from white corrosion, which can occur over time with electro-plated parts. To avoid the risk of white corrosive particles (which can cause electrical shorts) many in the electronics industry opt for black oxide instead of zinc plated fasteners. It is a color of the base metal, which neither removes nor deposits metal therefore it adds, at the most, 5 to 10 millionths of an inch to the fastener’s dimensions. Black oxide also resists abrasions better than phosphate. In addition to being used for decorative purposes, the finish reduces light glare and reflection, and makes the surface of the fastener smoother. Black oxide finish is a conversion coating (not an applied coating) because it results from a chemical reaction with the iron present in the metal fastener and forms and integral protective surface. Likewise, it cannot chip, peel or rub off. Also, the item maintains 99% of its conductivity making black oxide a popular finish for electrical parts. The post-treatment oil application offers good indoor corrosion protection, but a zinc-plated part is more resistant to rust. The popularity of black oxide stainless fasteners is also growing.
(2500pcs) 1/2″-13×1/2″ Socket Set Screw, Cup Point, Stainless Steel (18-8), Thermal Black Oxide, (inch), Size: 1/2″-13, Length: 1/2″, Coarse Thread (UNC),
- Cup point the cup point is the most used style set screw designed for fast, permanent and semi-permanent location of parts on shafts with hardness differential of 10-15 rockwell c points and where cutting in of cup edge on the shaft is acceptable. Stainless 18 8 cup point socket set screw (inch). Cup point a headless screw threaded the entire length it has a hexagonal drive at one end and a cup-shaped indentation at the other end.
1/4-20 x 2-inch Socket Set Screws Set Allen Drive Cup Point Stainless Steel Pack of 250 Warranity by Pr-Merchant
- Environment friendly not only is it made from high-quality elements this kit also promotes environmental protection and is guaranteed to be mercury-free and toxic-free generally making it poison-free. Lifetime warranty, 100% satisfaction guarantee if you have any problems we will replace them free of charge or issue a full refund we are so confident that our product is the best on the market that we offer a no hassle lifetime guarantee. Multiple use it can be used on multiple platforms and facets creating a concrete list of its uses would be near to impossible as it always finds its way to be a part of a newly founded machine, apparatus, furniture or equipment. 100% solid stainless steel made of high quality stainless steel our products feature strength and offers good corrosion resistance in bad environment like high temperature, cold weather, and high humidity areas known to be composed of steel alloy to prevent rust and stay like new stainless steel is suitable where formability and cost are important considerations. All items are brand new and well packaged your order will be carefully packaged and shipped quickly we value our customers, and their opinions.
(2500pcs) 1/2″-13×1/2″ Socket Set Screw, Flat Point, Alloy Steel, Thermal Black Oxide, (inch), Size: 1/2″-13, Length: 1/2″, Coarse Thread (UNC), RoHS
- It is a color of the base metal, which neither removes nor deposits metal therefore it adds, at the most, 5 to 10 millionths of an inch to the fastener’s dimensions. The post-treatment oil application offers good indoor corrosion protection, but a zinc-plated part is more resistant to rust. The color is a deep black rather than the grayish-black appearance of a black phosphate, and remains consistent at temperatures as high as 900ºf. Black oxide also resists abrasions better than phosphate. One of the most important advantages of black oxide is that there is almost no risk of hydrogen embrittlement because the process does not involve electro-plating nor does it require an acid-activation. Black oxide finish is a conversion coating (not an applied coating) because it results from a chemical reaction with the iron present in the metal fastener and forms and integral protective surface. Also, the item maintains 99% of its conductivity making black oxide a popular finish for electrical parts. Typically, the oil after-finish is dry to the touch, which gives the part a lustrous appearance and improved lubricity without excessive residue. Black oxide neither enhances nor detracts from a fastener’s resistance to corrosion. However, parts with a black oxide finish will not suffer from white corrosion, which can occur over time with electro-plated parts. In addition to being used for decorative purposes, the finish reduces light glare and reflection, and makes the surface of the fastener smoother. Likewise, it cannot chip, peel or rub off. To avoid the risk of white corrosive particles (which can cause electrical shorts) many in the electronics industry opt for black oxide instead of zinc plated fasteners. The popularity of black oxide stainless fasteners is also growing. When a black oxide finish is specified, it is interpreted as “black oxide and oil”.
(5000pcs) 5/16″-18×1/2″ Socket Set Screw, Oval Point, Alloy Steel, Thermal Black Oxide, (inch), Size: 5/16″-18, Length: 1/2″, Coarse Thread (UNC), RoHS
- Oval point preferred style for frequent reset on soft or hard shafts with minimum deforming also chosen for permanent setting on shafts spotted, splined or grooved, and for applications where point meets shaft on an angle. Oval point a set screw with an oval-shaped point at the end opposite that of the hexagonal drive. Sometimes substituted for the cup point style. Oval point socket set screw, thermal black oxide, alloy (inch).
Sunex 2657 1/2-Inch Drive Universal Standard Fractional Impact Socket Set, 9-Piece
- Includes most common sae sizes used for automotive repairs. Sunex 2657 1/2-inch drive universal standard fractional impact socket set, 9-piece. Heavy duty blow molded storage case. Sae, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16. Lifetime warranty.
1 1/4″-7 x 2″ Socket Set Screws Cup Point COARSE Alloy Thermal Black Oxide,Head: None,Drive: Internal Hex,Alloy_Steel,Plain,Point Style: Cup,Thread: UNC (Inch) (Quantity: 1)
- 18-8 stainless steel, makes this screw suitable for use in most general corrosive applications. Hey key size, 1/8″. Set screws are commonly referred to as grub screws. Set screw, a type of screw used to secure one object within or against another object. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet.
(1000pcs) 5/16″-18×1/2″ Socket Set Screw, Cone Point, Nylon Patch, Alloy Steel, Thermal Black Oxide, (inch), Size: 5/16″-18, Length: 1/2″, Coarse Thread (UNC), RoHS
- Can also be used as a pivot or hanger. Cone point a set screw with a sharp conical-shaped point at the opposite end from the hexagonal drive. Cone point for permanent setting on soft or hardened shafts the deep penetration it offers gives this style set screw the highest tor-sional & axial holding power for shafts of rockwell hardness c15 or over, spot point half its depth. #n/a.
(5000pcs) 3/8″-24×1/2″ Socket Set Screw, 1/2 Dog Point, Alloy Steel, Thermal Black Oxide, (inch), Size: 3/8″-24, Length: 1/2″, Fine Thread (UNF), RoHS
- The color is a deep black rather than the grayish-black appearance of a black phosphate, and remains consistent at temperatures as high as 900ºf. Also, the item maintains 99% of its conductivity making black oxide a popular finish for electrical parts. However, parts with a black oxide finish will not suffer from white corrosion, which can occur over time with electro-plated parts. The popularity of black oxide stainless fasteners is also growing. Black oxide also resists abrasions better than phosphate. Likewise, it cannot chip, peel or rub off. Black oxide neither enhances nor detracts from a fastener’s resistance to corrosion. Black oxide finish is a conversion coating (not an applied coating) because it results from a chemical reaction with the iron present in the metal fastener and forms and integral protective surface. The post-treatment oil application offers good indoor corrosion protection, but a zinc-plated part is more resistant to rust. In addition to being used for decorative purposes, the finish reduces light glare and reflection, and makes the surface of the fastener smoother. It is a color of the base metal, which neither removes nor deposits metal therefore it adds, at the most, 5 to 10 millionths of an inch to the fastener’s dimensions. One of the most important advantages of black oxide is that there is almost no risk of hydrogen embrittlement because the process does not involve electro-plating nor does it require an acid-activation. To avoid the risk of white corrosive particles (which can cause electrical shorts) many in the electronics industry opt for black oxide instead of zinc plated fasteners. Typically, the oil after-finish is dry to the touch, which gives the part a lustrous appearance and improved lubricity without excessive residue. When a black oxide finish is specified, it is interpreted as “black oxide and oil”.
(1000pcs) 3/8″-24×1/2″ Socket Set Screw, Oval Point, Nylon Patch, Alloy Steel, Thermal Black Oxide, (inch), Size: 3/8″-24, Length: 1/2″, Fine Thread (UNF), RoHS
- Oval point preferred style for frequent reset on soft or hard shafts with minimum deforming also chosen for permanent setting on shafts spotted, splined or grooved, and for applications where point meets shaft on an angle. Oval point socket set screw, nylon patch, thermal black oxide, alloy (inch). Oval point a set screw with an oval-shaped point at the end opposite that of the hexagonal drive. Sometimes substituted for the cup point style.
5/16″-18×1/2″ Socket Set Screw, Nylon Tip, Alloy Steel, Thermal Black Oxide, (inch), Head: None, (Quantity: 1000) Size: 5/16″-18, Length: 1/2″, Coarse Thread (UNC), RoHS
- Nylon tip set screws are desired when a softer material is needed. Alloy steel body, black oxide finish, nylon 6/6 tip, rohs compliant, hex socket drive. The nylon tips help to limit end play from rotating shafts. Diameter 5/16″-18, length 1/2″, thread type unc.
(3000pcs) 7/16″-14×1/2″ Socket Set Screw, Cup Point, Alloy Steel, Thermal Black Oxide, (inch), Size: 7/16″-14, Length: 1/2″, Coarse Thread (UNC), RoHS
- Black oxide finish is a conversion coating (not an applied coating) because it results from a chemical reaction with the iron present in the metal fastener and forms and integral protective surface. Black oxide neither enhances nor detracts from a fastener’s resistance to corrosion. Black oxide also resists abrasions better than phosphate. Likewise, it cannot chip, peel or rub off. The color is a deep black rather than the grayish-black appearance of a black phosphate, and remains consistent at temperatures as high as 900ºf. When a black oxide finish is specified, it is interpreted as “black oxide and oil”. It is a color of the base metal, which neither removes nor deposits metal therefore it adds, at the most, 5 to 10 millionths of an inch to the fastener’s dimensions. In addition to being used for decorative purposes, the finish reduces light glare and reflection, and makes the surface of the fastener smoother. However, parts with a black oxide finish will not suffer from white corrosion, which can occur over time with electro-plated parts. To avoid the risk of white corrosive particles (which can cause electrical shorts) many in the electronics industry opt for black oxide instead of zinc plated fasteners. Typically, the oil after-finish is dry to the touch, which gives the part a lustrous appearance and improved lubricity without excessive residue. The popularity of black oxide stainless fasteners is also growing. The post-treatment oil application offers good indoor corrosion protection, but a zinc-plated part is more resistant to rust. One of the most important advantages of black oxide is that there is almost no risk of hydrogen embrittlement because the process does not involve electro-plating nor does it require an acid-activation. Also, the item maintains 99% of its conductivity making black oxide a popular finish for electrical parts.
(2500pcs) 1/2″-13×1/2″ Socket Set Screw, Cup Point, Stainless Steel (316), (inch), Size: 1/2″-13, Length: 1/2″, Coarse Thread (UNC), RoHS
- Cup point the cup point is the most used style set screw designed for fast, permanent and semi-permanent location of parts on shafts with hardness differential of 10-15 rockwell c points and where cutting in of cup edge on the shaft is acceptable. Cup point a headless screw threaded the entire length it has a hexagonal drive at one end and a cup-shaped indentation at the other end. Stainless 316 cup point socket set screw (inch).
5/16-18 x 2-inch Socket Set Machine Screws Kit Allen Drive Cup Point Stainless Steel Pack of 25 Warranity by Pr-Merchant
- 100% solid stainless steel made of high quality stainless steel our products feature strength and offers good corrosion resistance in bad environment like high temperature, cold weather, and high humidity areas known to be composed of steel alloy to prevent rust and stay like new stainless steel is suitable where formability and cost are important considerations. Lifetime warranty, 100% satisfaction guarantee if you have any problems we will replace them free of charge or issue a full refund we are so confident that our product is the best on the market that we offer a no hassle lifetime guarantee. Environment friendly not only is it made from high-quality elements this kit also promotes environmental protection and is guaranteed to be mercury-free and toxic-free generally making it poison-free. Multiple use it can be used on multiple platforms and facets creating a concrete list of its uses would be near to impossible as it always finds its way to be a part of a newly founded machine, apparatus, furniture or equipment. All items are brand new and well packaged your order will be carefully packaged and shipped quickly we value our customers, and their opinions.
(500pcs) 1/2″-13×1/2″ Socket Set Screw, 1/2 Dog Point, Nylon Patch, Alloy Steel, Thermal Black Oxide, (inch), Size: 1/2″-13, Length: 1/2″, Coarse Thread (UNC), RoHS
- In addition to being used for decorative purposes, the finish reduces light glare and reflection, and makes the surface of the fastener smoother. The color is a deep black rather than the grayish-black appearance of a black phosphate, and remains consistent at temperatures as high as 900ºf. Typically, the oil after-finish is dry to the touch, which gives the part a lustrous appearance and improved lubricity without excessive residue. Black oxide finish is a conversion coating (not an applied coating) because it results from a chemical reaction with the iron present in the metal fastener and forms and integral protective surface. Also, the item maintains 99% of its conductivity making black oxide a popular finish for electrical parts. Black oxide also resists abrasions better than phosphate. When a black oxide finish is specified, it is interpreted as “black oxide and oil”. Likewise, it cannot chip, peel or rub off. The post-treatment oil application offers good indoor corrosion protection, but a zinc-plated part is more resistant to rust. However, parts with a black oxide finish will not suffer from white corrosion, which can occur over time with electro-plated parts. The popularity of black oxide stainless fasteners is also growing. It is a color of the base metal, which neither removes nor deposits metal therefore it adds, at the most, 5 to 10 millionths of an inch to the fastener’s dimensions. One of the most important advantages of black oxide is that there is almost no risk of hydrogen embrittlement because the process does not involve electro-plating nor does it require an acid-activation. Black oxide neither enhances nor detracts from a fastener’s resistance to corrosion. To avoid the risk of white corrosive particles (which can cause electrical shorts) many in the electronics industry opt for black oxide instead of zinc plated fasteners.
1/4-28 x 2-inch Socket Set Hardware Machine Screws Kit Allen Drive Cup Point Stainless Steel Pack of 25 Warranity by Pr-Merchant
- 100% solid stainless steel made of high quality stainless steel our products feature strength and offers good corrosion resistance in bad environment like high temperature, cold weather, and high humidity areas known to be composed of steel alloy to prevent rust and stay like new stainless steel is suitable where formability and cost are important considerations. Lifetime warranty, 100% satisfaction guarantee if you have any problems we will replace them free of charge or issue a full refund we are so confident that our product is the best on the market that we offer a no hassle lifetime guarantee. Environment friendly not only is it made from high-quality elements this kit also promotes environmental protection and is guaranteed to be mercury-free and toxic-free generally making it poison-free. All items are brand new and well packaged your order will be carefully packaged and shipped quickly we value our customers, and their opinions. Multiple use it can be used on multiple platforms and facets creating a concrete list of its uses would be near to impossible as it always finds its way to be a part of a newly founded machine, apparatus, furniture or equipment.
(3000pcs) 7/16″-20×1/2″ Socket Set Screw, Cup Point, Alloy Steel, Thermal Black Oxide, (inch), Size: 7/16″-20, Length: 1/2″, Fine Thread (UNF), RoHS
- However, parts with a black oxide finish will not suffer from white corrosion, which can occur over time with electro-plated parts. It is a color of the base metal, which neither removes nor deposits metal therefore it adds, at the most, 5 to 10 millionths of an inch to the fastener’s dimensions. The popularity of black oxide stainless fasteners is also growing. To avoid the risk of white corrosive particles (which can cause electrical shorts) many in the electronics industry opt for black oxide instead of zinc plated fasteners. Also, the item maintains 99% of its conductivity making black oxide a popular finish for electrical parts. Typically, the oil after-finish is dry to the touch, which gives the part a lustrous appearance and improved lubricity without excessive residue. One of the most important advantages of black oxide is that there is almost no risk of hydrogen embrittlement because the process does not involve electro-plating nor does it require an acid-activation. Black oxide also resists abrasions better than phosphate. Likewise, it cannot chip, peel or rub off. When a black oxide finish is specified, it is interpreted as “black oxide and oil”. In addition to being used for decorative purposes, the finish reduces light glare and reflection, and makes the surface of the fastener smoother. The color is a deep black rather than the grayish-black appearance of a black phosphate, and remains consistent at temperatures as high as 900ºf. Black oxide neither enhances nor detracts from a fastener’s resistance to corrosion. Black oxide finish is a conversion coating (not an applied coating) because it results from a chemical reaction with the iron present in the metal fastener and forms and integral protective surface. The post-treatment oil application offers good indoor corrosion protection, but a zinc-plated part is more resistant to rust.
(5000pcs) 3/8″-24×1/2″ Socket Set Screw, Oval Point, Alloy Steel, Thermal Black Oxide, (inch), Size: 3/8″-24, Length: 1/2″, Fine Thread (UNF), RoHS
- Oval point a set screw with an oval-shaped point at the end opposite that of the hexagonal drive. Oval point preferred style for frequent reset on soft or hard shafts with minimum deforming also chosen for permanent setting on shafts spotted, splined or grooved, and for applications where point meets shaft on an angle. Oval point socket set screw, thermal black oxide, alloy (inch). Sometimes substituted for the cup point style.
1/4″-20×1/2″ Socket Set Screw, 1/2 Dog Point, Nylon Patch, Alloy Steel, Thermal Black Oxide, (inch), Head: None, (Quantity: 1000) Size: 1/4″-20, Length: 1/2″, Coarse Thread (UNC), RoHS
- Nylon patch is a self locking element comprised of nylon offering exceptional vibration resistance. Often used instead of a dowel pin. Nylon patch is permanently embdded into the threads eliminates needs of lockwashers. A set screw w/ a protruding tip with a flat surface at the end opposite that of the hexagonal drive. Intended for permanent setting the point should fit closely to the diameter of the drilled hole.
(1000pcs) 1/4″-20×1/2″ Socket Set Screw, Cup Point, Nylon Patch, Alloy Steel, Thermal Black Oxide, (inch), Size: 1/4″-20, Length: 1/2″, Coarse Thread (UNC), RoHS
- When a black oxide finish is specified, it is interpreted as “black oxide and oil”. However, parts with a black oxide finish will not suffer from white corrosion, which can occur over time with electro-plated parts. The color is a deep black rather than the grayish-black appearance of a black phosphate, and remains consistent at temperatures as high as 900ºf. Black oxide also resists abrasions better than phosphate. Likewise, it cannot chip, peel or rub off. It is a color of the base metal, which neither removes nor deposits metal therefore it adds, at the most, 5 to 10 millionths of an inch to the fastener’s dimensions. Black oxide neither enhances nor detracts from a fastener’s resistance to corrosion. To avoid the risk of white corrosive particles (which can cause electrical shorts) many in the electronics industry opt for black oxide instead of zinc plated fasteners. One of the most important advantages of black oxide is that there is almost no risk of hydrogen embrittlement because the process does not involve electro-plating nor does it require an acid-activation. The popularity of black oxide stainless fasteners is also growing. Typically, the oil after-finish is dry to the touch, which gives the part a lustrous appearance and improved lubricity without excessive residue. In addition to being used for decorative purposes, the finish reduces light glare and reflection, and makes the surface of the fastener smoother. Black oxide finish is a conversion coating (not an applied coating) because it results from a chemical reaction with the iron present in the metal fastener and forms and integral protective surface. The post-treatment oil application offers good indoor corrosion protection, but a zinc-plated part is more resistant to rust. Also, the item maintains 99% of its conductivity making black oxide a popular finish for electrical parts.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
