Kyocera USA Made 3 Flute Reinforced Shank Corner Radius End Mill 5.00mm Diameter 6mm Shank 15.0mm Length of Cut (LOC) 75mm Overall Length (OAL) AX Coated TITAN-AX (T1969O591ECR5)
- 500mm diameter, 6mm shank. Kyocera titan-ax t1969o591ecr5 3 flute reinforced shank corner radius end mill (extended length). 150mm length of cut, 75mm overall length. Ax high performance coating for tough machining applications. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number.
Kyocera USA Made 5 Flute High Helix Standard Length Corner Radius End Mill 1.00mm Diameter 3mm Shank 3.00mm Length of Cut 38mm Overall Length Uncoated Series 1905 (1905-0394.118R)
- Series 1905, uncoated. Reach length n/a, radius 010mm. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. 100mm diameter, 3mm shank, 300mm length of cut, 38mm overall length. Kyocera usa made 1905-0394118r 5 flute high helix standard length corner radius end mill.
Kyocera USA Made 2 Flute Standard Length Square End Mill 0.056in Diameter 1/8in Shank 0.168in Length of Cut (LOC) 1 1/2in Overall Length (OAL) Uncoated Series 1610 (1610-0560.168)
- 0168in length of cut, 1 1/2in overall length. Kyocera 1610-0560168 2 flute standard length square end mill. Uncoated. 0056in diameter, 1/8in shank. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number.
Kyocera USA Made 3 Flute Extended Reach Stub Length Ball Nose End Mill 0.0200in Diameter 1/8in Shank 0.030in Length of Cut 2 1/2in Overall Length Uncoated Series 1755 (1755-0200.100)
- Series 1755, uncoated. Kyocera usa made 1755-0200100 3 flute extended reach stub length ball nose end mill. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Reach length 01in, radius n/a. 00200in diameter, 1/8in shank, 0030in length of cut, 2 1/2in overall length.
Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 0.0350in Diameter 1/8in Shank 0.052in Length of Cut (LOC) 2 1/2in Overall Length (OAL) Uncoated Series 1742 (1742-0350.281)
- Uncoated. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. 00350in diameter, 1/8in shank. Kyocera 1742-0350281 3 flute extended reach stub length square end mill. 0052in length of cut, 2 1/2in overall length.
Kyocera USA Made 3 Flute Reinforced Shank Square End Mill 0.0312 1/32in Diameter 1/4in Shank 0.063in Length of Cut (LOC) 2 1/2in Overall Length (OAL) AX Coated TITAN-AX (T0312O063)
- 00312 1/32in diameter, 1/4in shank. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Ax high performance coating for tough machining applications. Kyocera titan-ax t0312o063 3 flute reinforced shank square end mill (stub length). 0063in length of cut, 2 1/2in overall length.
Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 0.1250 1/8in Diameter 1/8in Shank 0.187in Length of Cut (LOC) 2 1/2in Overall Length (OAL) AlTiN Coated Series 1742 (1742-1250L1000)
- This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. 01250 1/8in diameter, 1/8in shank. 0187in length of cut, 2 1/2in overall length. Altin coated. Kyocera 1742-1250l1000 3 flute extended reach stub length square end mill.
Kyocera USA Made 2 Flute Standard Length Square End Mill 1mm Diameter 3mm Shank 3mm Length of Cut (LOC) 38mm Overall Length (OAL) AlTiN Coated Series 1610 (1610-0394L118)
- Altin coated. Kyocera 1610-0394l118 2 flute standard length square end mill. 3mm length of cut, 38mm overall length. 1mm diameter, 3mm shank. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number.
Kyocera USA Made 3 Flute Extended Reach Stub Length Ball Nose End Mill 0.0900in Diameter 1/8in Shank 0.120in Length of Cut 2 1/2in Overall Length AlTiN Coated Series 1755 (1755-0900L750)
- This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. 00900in diameter, 1/8in shank, 0120in length of cut, 2 1/2in overall length. Reach length 075in, radius n/a. Kyocera usa made 1755-0900l750 3 flute extended reach stub length ball nose end mill. Series 1755, altin coated.
Kyocera USA Made 2 Flute Stub Length Ball Nose End Mill 1.50mm Diameter 3mm Shank 2.25mm Length of Cut 38mm Overall Length Uncoated Series 1635 (1635-0591.089)
- Kyocera usa made 1635-0591089 2 flute stub length ball nose end mill. Series 1635, uncoated. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. 150mm diameter, 3mm shank, 225mm length of cut, 38mm overall length. Reach length n/a, radius n/a.
Kyocera USA Made 3 Flute Extended Reach Large Corner Radius End Mill 0.1250 1/8in Diameter 1/8in Shank 0.187in Length of Cut 2 1/2in Overall Length AlTiN Coated Series 1746 (1746-1250L1000C)
- This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Series 1746, altin coated. Reach length 1in, radius 003in. 01250 1/8in diameter, 1/8in shank, 0187in length of cut, 2 1/2in overall length. Kyocera usa made 1746-1250l1000c 3 flute extended reach large corner radius end mill.
Sino-max M2 High Speed Steel End Mill, Polished Finish, 2 Flute, Square End, 1″ Cutting Length, 1/2″ Cutting Diameter, 3″ Overall Length, 1/2″ Shank (Pack of 1)
- M2 highs speed steel enable high hardness. Bright polished surface treatment enable nice looking. High level heat treatment. 2 flutes design to enable quick chips removal and quick cutting.
Kyocera USA Made 2 Flute Standard Length Square End Mill 0.0625 1/16in Diameter 1/8in Shank 0.188in Length of Cut (LOC) 1 1/2in Overall Length (OAL) Uncoated Series 1610 (1610-0625.188)
- 0188in length of cut, 1 1/2in overall length. Kyocera 1610-0625188 2 flute standard length square end mill. Uncoated. 00625 1/16in diameter, 1/8in shank. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number.
Niagara Cutter 85705 Flute Single End Solid Carbide End Mill, Diameter 85705
- Uncoated. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. 0019in diameter, 1/8in shank. Niagara cutter 5/8″ x 5/8″ x 6″ 4-flute x 3″ flute length. Kyocera 1610-0190057 2 flute standard length square end mill.
Kyocera USA Made 4 Flute Standard Length Small Corner Radius End Mill 0.0250in Diameter 1/8in Shank 0.038in Length of Cut 1 1/2in Overall Length AlTiN Coated Series 1812 (1812-0250L038CR)
- 00250in diameter, 1/8in shank, 0038in length of cut, 1 1/2in overall length. Kyocera usa made 1812-0250l038cr 4 flute standard length small corner radius end mill. Reach length n/a, radius 0005in. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Series 1812, altin coated.
Kyocera USA Made 3 Flute Extended Reach Stub Length Ball Nose End Mill 0.0500in Diameter 1/8in Shank 0.075in Length of Cut 2 1/2in Overall Length Uncoated Series 1755 (1755-0500.250)
- Kyocera usa made 1755-0500250 3 flute extended reach stub length ball nose end mill. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Series 1755, uncoated. Reach length 025in, radius n/a. 00500in diameter, 1/8in shank, 0075in length of cut, 2 1/2in overall length.
Kyocera USA Made 3 Flute Extended Length Square End Mill 0.1000in Diameter 1/8in Shank 0.750in Length of Cut (LOC) 2 1/2in Overall Length (OAL) Uncoated Series 1740 (1740-1000.1250)
- Kyocera 1740-10001250 3 flute extended length square end mill. Uncoated. 0750in length of cut, 2 1/2in overall length. 01000in diameter, 1/8in shank. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number.
Kyocera USA Made 2 Flute Stub Length Square End Mill 0.2mm Diameter 3mm Shank 0.3mm Length of Cut (LOC) 38mm Overall Length (OAL) Uncoated Series 1620 (1620-0079.012)
- Kyocera 1620-0079012 2 flute stub length square end mill. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. 03mm length of cut, 38mm overall length. Uncoated. 02mm diameter, 3mm shank.
Kyocera USA Made 2 Flute Standard Length Square End Mill 0.11in Diameter 1/8in Shank 0.33in Length of Cut (LOC) 1 1/2in Overall Length (OAL) Uncoated Series 1610 (1610-1100.330)
- This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. 011in diameter, 1/8in shank. 033in length of cut, 1 1/2in overall length. Uncoated. Kyocera 1610-1100330 2 flute standard length square end mill.
Kyocera USA Made 3 Flute Extended Reach Stub Length Square End Mill 0.0400in Diameter 1/8in Shank 0.060in Length of Cut (LOC) 2 1/2in Overall Length (OAL) AlTiN Coated Series 1742 (1742-0400L600)
- 00400in diameter, 1/8in shank. Kyocera 1742-0400l600 3 flute extended reach stub length square end mill. 0060in length of cut, 2 1/2in overall length. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Altin coated.
Kyocera USA Made 2 Flute Stub Length Ball Nose End Mill 0.15mm Diameter 3mm Shank 0.23mm Length of Cut 38mm Overall Length Uncoated Series 1635 (1635-0059.009)
- This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Series 1635, uncoated. 015mm diameter, 3mm shank, 023mm length of cut, 38mm overall length. Kyocera usa made 1635-0059009 2 flute stub length ball nose end mill. Reach length n/a, radius n/a.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
