Top 19 Pull Studs

 

Pull Stud

Pull Stud

Pull Stud - Replacement parts. Tool parts & accesories. Cnc tool holder pull stud.

 

uxcell BT30 x 45 Degree Pull Stud Retention Knob CNC Milling Tool Holder

uxcell BT30 x 45 Degree Pull Stud Retention Knob CNC Milling Tool Holder

uxcell BT30 x 45 Degree Pull Stud Retention Knob CNC Milling Tool Holder - Degree 45 degreethread dia m12angle degree 45 degree. Product name retention knobmaterial steelmachine taper type bt30. From shoulder to end of knob 18mm/07″,20mm/08″total size 43x16mm/17″x063″(lmaxd)color silver tone,black. Net weight 32gpackage content 1 x retention knob. Pilot diameter 125mm/049″neck diameter 7mm/028″knob dia 11mm/043″.

 

Rockwood BF97L32D Stainless Steel Barrier Free Flush Pull Stud Welded Lug and Through Bolt Fasteners 5 Width x 5 Height x 78 Depth Satin Finish by Rockwood

Rockwood BF97L.32D Stainless Steel Barrier Free Flush Pull, Stud Welded Lug and Through Bolt Fasteners, 5 Width x 5 Height x 7/8 Depth, Satin Finish by Rockwood

Rockwood BF97L.32D Stainless Steel Barrier Free Flush Pull, Stud Welded Lug and Through Bolt Fasteners, 5 Width x 5 Height x 7/8 Depth, Satin Finish by Rockwood - Rockwood bf97l32d stainless steel barrier free flush pull, stud welded lug and through bolt fasteners, 5 width x 5 height x 7/8 depth, satin finish. Certified for accuracy and balance. Balanced to 40,000 rpm at g25. Er25, 50mm gage length with slotted nut and pull stud.

 

Jacobs DIN 40 Type A-L Pull Stud

Jacobs DIN 40 Type A-L Pull Stud

Jacobs DIN 40 Type A-L Pull Stud - Highest quality for maximum safety and long life. Precision gound.

 

Accusize Tools - 30 Pc of Style C CAT40 Pull Stud Retention Knob with Coolant Hole fits HAAS Mitsubishi Toshiba Daewoo OKK Kitamuraetc 6780-1044x30

Accusize Tools – 30 Pc of Style C, CAT40 Pull Stud Retention Knob with Coolant Hole fits HAAS, Mitsubishi, Toshiba, Daewoo, OKK, Kitamura,etc, #6780-1044×30

Accusize Tools – 30 Pc of Style C, CAT40 Pull Stud Retention Knob with Coolant Hole fits HAAS, Mitsubishi, Toshiba, Daewoo, OKK, Kitamura,etc, #6780-1044×30 - Style c. Taper cat 40. Fully ground on all critical surface including a pilot under the flange of retention knob for full contact between tool holder’s taper end and retention knob. 30 pcs of style ccat40 pull stud retention knob with coolant hole, #6780-1044×30. Angle 45 degree.

 

Accusize Tools - 30 Pcs CAT40 Pull Stud Retention Knob Fadal Mazak Hurco Okama Solid 6780-0042x30

Accusize Tools – 30 Pcs CAT40 Pull Stud Retention Knob Fadal, Mazak, Hurco, Okama Solid, #6780-0042×30

Accusize Tools – 30 Pcs CAT40 Pull Stud Retention Knob Fadal, Mazak, Hurco, Okama Solid, #6780-0042×30 - 30 pcs cat40 pull stud retention knob fadal mazak solid, #6780-0042×30. Fully ground on all critical surface including a pilot under the flange of retention knob for full contact between tool holder’s taper end and retention knob. L2 shou to end 0640”. Taper cat 40 angle 45 degree d1 knob 0740” d2 neck 0490”. D4 pilot 0636” l 1625” l1 0440”.

 

uxcell BT40 x 45 Degree Pull Stud Retention Knob CNC Milling Tool Holder

uxcell BT40 x 45 Degree Pull Stud Retention Knob CNC Milling Tool Holder

uxcell BT40 x 45 Degree Pull Stud Retention Knob CNC Milling Tool Holder - From shoulder to end of knob 28mm/11″315mm/124″total size 60x23mm/24″x09″(lmaxd)color silver tone,black. Pilot diameter 17mm/067″neck diameter 10mm/04″knob dia 15mm/06″. Degree 45 degreethread dia m16/06″angle degree 45 degree. Net weight 73gpackage content 1 x retention knob. Product name retention knobmaterial steelmachine taper type bt40.

 

Pull Stud

Pull Stud

Pull Stud - Replacement parts. Tool parts & accesories. Cnc tool holder pull stud.

 

Accusize Tools - Style C CAT40 Pull Stud Retention Knob Solid fits HAAS Mitsubishi Toshiba Daewoo OKK Kitamuraetc 6780-1025

Accusize Tools – Style C, CAT40 Pull Stud Retention Knob, Solid fits HAAS, Mitsubishi, Toshiba, Daewoo, OKK, Kitamura,etc, #6780-1025

Accusize Tools – Style C, CAT40 Pull Stud Retention Knob, Solid fits HAAS, Mitsubishi, Toshiba, Daewoo, OKK, Kitamura,etc, #6780-1025 - Fully ground on all critical surface including a pilot under the flange of retention knob for full contact between tool holder’s taper end and retention knob. Style c. Taper cat 40. Angle 45 degree. Ccat40 pull stud retention knob with coolant hole,.

 

Generic Bt30 X 60 Degree Pull Stud Retention Knob CNC Milling Tool Holder Pack of 2

Generic Bt30 X 60 Degree Pull Stud Retention Knob CNC Milling Tool Holder (Pack of 2)

Generic Bt30 X 60 Degree Pull Stud Retention Knob CNC Milling Tool Holder (Pack of 2) - Mas specification pull-head screws with bt standard shank adopt imported steel, heat treated, hrc50 degree machine taper bt30 thread m12 head diameter 11 mm neck diameter 7 mm full length 43 mm angle degree 60 degrees color black and silver weight 66g package include 2pcs bt30 knob.

 

Accusize Tools - 30 Pcs of Style C CAT40 Pull Stud Retention Knob Solid fits HAAS Mitsubishi Toshiba Daewoo OKK Kitamuraetc 6780-1025x30

Accusize Tools – 30 Pcs of Style C, CAT40 Pull Stud Retention Knob, Solid fits HAAS, Mitsubishi, Toshiba, Daewoo, OKK, Kitamura,etc, #6780-1025×30

Accusize Tools – 30 Pcs of Style C, CAT40 Pull Stud Retention Knob, Solid fits HAAS, Mitsubishi, Toshiba, Daewoo, OKK, Kitamura,etc, #6780-1025×30 - Angle 45 degree. Style c. Fully ground on all critical surface including a pilot under the flange of retention knob for full contact between tool holder’s taper end and retention knob. Taper cat 40. 30 pcs of style c, cat40 pull stud retention knob, solid, #6780-1025×30.

 

TECHNIKS 300TH HIGH PRECISION ADJUSTABLE TORQUE WRENCH- COLLETS PULL STUDS ETC

TECHNIKS #300TH HIGH PRECISION ADJUSTABLE TORQUE WRENCH- COLLETS PULL STUDS ETC.

TECHNIKS #300TH HIGH PRECISION ADJUSTABLE TORQUE WRENCH- COLLETS PULL STUDS ETC. - Our part # tec-300th. Dimensions 215″ length, 270 lb weight spigot measures 16mm round. Torque range 45-228 ft/lbs (5-45 & 30-150 ft/lbs versions also available in our ebay store). Makes setting correct torque fast & easy. Extends life of cutting tools, collets, pull studs & nuts.

 

Shars Tool CAT 40 58-11 45 Pull Stud Retention Knob for Haas Kitamura Miyano

Shars Tool CAT 40 5/8-11 45 Pull Stud Retention Knob for Haas Kitamura Miyano

Shars Tool CAT 40 5/8-11 45 Pull Stud Retention Knob for Haas Kitamura Miyano - Made from alloy steel 5155 with heat treat to rc 56-58 each retention knob is individually magnetic particle tested to ensure free of crack high quality black oxide finish to ensure long enduring tool life fully ground on all critical surface including a pilot under the flange of retention knob for full contact between tool holder’s taper end and retention knob this pull stud is compatible with the followingtj davies ps-532 x 45 lyndex c40s-4500 collis 64712.

 

WEONE Replacement 2Pcs Black and silver M16 BT40 x 45 Degree Pull Stud Retention Knob CNC Milling Tool Holder

WEONE Replacement 2Pcs Black and silver M16 BT40 x 45 Degree Pull Stud Retention Knob CNC Milling Tool Holder

WEONE Replacement 2Pcs Black and silver M16 BT40 x 45 Degree Pull Stud Retention Knob CNC Milling Tool Holder - Note the color of the item may vary slightly due to photography and your own computer mas specification pull-head screws with bt standard shank adopt imported steel, heat treated, hrc50 degree machine taper bt40 thread m16 head diameter 15 mm neck diameter 10 mm full length 60 mm angle degree 45 degrees color black and silver weight 157g package include 2pcs bt40 knob.

 

Pull Stud

Pull Stud

Pull Stud - Cnc tool holder pull stud. Tool parts & accesories. Replacement parts.

 

Yasorn 2-pack Taper Pull Stud Retention Knob CNC Milling Toolholder BT30 x 45 Degree

Yasorn 2-pack Taper Pull Stud Retention Knob CNC Milling Toolholder BT30 x 45 Degree

Yasorn 2-pack Taper Pull Stud Retention Knob CNC Milling Toolholder BT30 x 45 Degree - All locations of the pullstud which contacting with ground spindle mechanism components are milled. Machine taper bt30, thread m12, head diameter 11 mm, neck diameter 7 mm,full length 43 mm, angle degree 45 degrees, color black and silver. Made of imported steel with heat treated. The base of pullstud flange is milled to ensure perpendicular alignment between pullstud and taper of toolholder. Mas specification pulling head screws with bt standard shank, meets tensile and shear requirements.

 

ER Combination Collet Wrench combines ER 32 ER 16 and ER 11 collet wrench and has a Retention KnobPull Stud and Vise Wrench combo bundle also available to include ER 40 ER 25 and ER 20 collet wrench

ER Combination Collet Wrench (combines ER 32, ER 16 and ER 11 collet wrench and has a Retention Knob/Pull Stud and Vise Wrench) (combo bundle also available to include ER 40, ER 25 and ER 20 collet wrench)

ER Combination Collet Wrench (combines ER 32, ER 16 and ER 11 collet wrench and has a Retention Knob/Pull Stud and Vise Wrench) (combo bundle also available to include ER 40, ER 25 and ER 20 collet wrench) - Combines the most commonly used er collet wrenches for cnc milling/lathing machines for cost savings and convenience. Er 32 collet wrench, er 16 collet wrench, er 11 collet wrench, retention knob/pull stud, vise wrench.

 

M4 x 7 Puller Stud Pull Dowel RemoversSetters 1 Each

M4 x .7 Puller Stud, Pull Dowel Removers/Setters (1 Each)

M4 x .7 Puller Stud, Pull Dowel Removers/Setters (1 Each) - Fully ground on all critical surface including a pilot under the flange of retention knob for full contact between tool holder’s taper end and retention knob. 10 pcs cat40 pull stud retention knob fadal mazak solid, #6780-0042×10. Made of rugged and durable stainless steel. D4 pilot 0636” l 1625” l1 0440”. Taper cat 40 angle 45 degree d1 knob 0740” d2 neck 0490”.

 

ER Combination Collet Wrench bundle of 2 but available separately Two wrenches that combine ER 40 ER 32 ER 25 ER 20 ER 16 and ER 11 collet wrench Also has a retention knobpull stud and vise wrench on both

ER Combination Collet Wrench (bundle of 2 but available separately) Two wrenches that combine ER 40, ER 32, ER 25, ER 20, ER 16 and ER 11 collet wrench. Also has a retention knob/pull stud and vise wrench on both)

ER Combination Collet Wrench (bundle of 2 but available separately) Two wrenches that combine ER 40, ER 32, ER 25, ER 20, ER 16 and ER 11 collet wrench. Also has a retention knob/pull stud and vise wrench on both) - . Both combo wrenches have a retention knob/pull stud, vise wrench. Er 32 combo wrench combines er 32, er 16 and er 11 collet wrench. Er 40 combo wrench combines er 40, er 25, er 20 and er 11 collet wrench. Combines the most commonly used er collet wrenches for cnc milling/lathing machines for cost savings and convenience.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.