Starrett S565WB Drive Pin Punch 8-Piece Set, 1/16″-5/16″ Pin Diameters, 4″ Overall Length, In Plastic Case
- Round shank is knurled for grip. Comes with round red plastic case for storage. Set of eight drive pin punches with 4″ overall length and 1/16″, 3/32″, 1/8″, 5/32″, 3/16″, 7/32″, 1/4″, and 5/16″ pin diameters for pushing pins and rivets into or out of a workpiece. Hardened and tempered steel provides wear resistance and strength.
Starrett 117C Center Punch With Round Shank, 4″ Length, 1/8″ Tapered Point Diameter
- The punch is made from hardened and tempered steel, which provides wear resistance and strength. The l. The starrett 117c center punch with round shank is 4″ long and has a 1/8″ (3 mm) diameter tapered point. The round shank is knurled for grip. S. Manual center punches have a metal shank with a point and are typically tapped with a ball-peen hammer to mark the material. The company, founded in 1880, is headquartered in athol, ma. Starrett company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. Center punches make small dimple marks in a workpiece to help guide a drill bit. Automatic center punches have an internal spring mechanism that enables them to mark the material without using a hammer, leaving one hand free for steadying the work.
Starrett Measure Stix SM412WRL Steel White Measure Tape with Adhesive Backing, English Graduation Style, Right To Left Reading, 12′ Length, 0.5″ Width, 0.0625″ Graduation Interval
- Produced with permanent adhesive back that sticks to almost any work surface for convenient, at-a-glance measurements. Mounts on work benches, saw tables, drafting tables, etc. Reads left to right or right to left. Easily cut to size with scissors. Manufactured of high quality precision steel for extended service use.
Starrett S565PC Drive Pin Punch Set (8 Pieces)
- Made of hardened, tempered steel for strength. Eight-piece steel drive pin punch set for driving pins into or out of a workpiece. Cylindrical body is knurled for grip. Protective vinyl case for storage and organization. Includes pin punches with diameters 1/16″, 3/32″, 1/8″, 5/32″, 3/16″, 7/32″, 1/4″, and 5/16″.
Starrett K53-8-N Stainless Steel Carpenters Try Square, 8″ Length
- Stainless steel blade for durability and rust resistance. Two-inch cast aluminum handle for durability. Eight-inch try square for marking and measuring right angles in woodworking. Inch graduations in 8ths of an inch on both sides of the blade are etched and staggered in a height pattern for readability.
Starrett Measure Stix SM66W Steel White Measure Tape with Adhesive Backing, English Graduation Style, Left To Right Reading, 6′ Length, 0.75″ Width, 0.0625″ Graduation Interval
- Easily cut to size with scissors. Produced with permanent adhesive back that sticks to almost any work surface for convenient, at-a-glance measurements. Reads left to right or right to left. Mounts on work benches, saw tables, drafting tables, etc. Manufactured of high quality precision steel for extended service use.
Starrett C11H-6-4R Cast Iron Square Head With Satin Chrome Blade Combination Square, Black Wrinkle Finish, 4R Graduation, 6″ Size
- A reversible lock bolt allows the blade to be turned over or end-for-end without removing the lock bolt or nut. The value of starrett tools is that they are accurate and will last. This saves littering the workbench with too many tools, each being necessary but may be used less. Starrett combination square consist of a machine-divided, hardened and tempered steel rule (or blade) on which is mounted an adjustable square head. Square head are made of cast iron and are not to be confused with the cheap imitation plastic or die cast heads on the market. As the name indicates, this tool can be used for many different purposes, a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This results in the goal of all good craftsmen, better accuracy and greater efficiency. This ensures true alignment of the blade and heads.
Starrett CH604R-6 6 2-Sided Steel Ruler with Hook
- Starrett 6″ x 3/4″ x 0. . Flush starts on both sides. Hook may be reversed or removed. 043″ ruler with hook permits accurate measurements even when the user cannot see if the ruler is even with the measuring edge. Spring tempered steel with satin chrome finish. Useful for measuring around corners, through hubs, for setting inside calipers, etc.
Starrett 505A-7 ProSite Protractor
- 7-inch long 1-1/2-pound 1-year warranty. Takes error-prone calculations out of miter cuts. Scale shows angle for a miter joint and single cut. Allows direct transfer of the work angle to the miter saw in 3 steps with no calculations. Ideal for carpenters, plumbers and all building trades. Saves time and reduces waste. Upside down or backwards, the reading is always correct. 7-inch miter saw protractor with two scales-red -inchmiter cut-inch scale and black -inchsingle cut-inch scale. 12-inch version also available to cover. Features durable 1/4-inch thick aluminum alloy and reflon o-ring for smooth, precise operation.
Starrett 505A-12 12″ – 300mm Aluminium Miter Protractor
- Takes error-prone calculations out of miter cuts. 12-inch miter saw protractor with two scales–red “miter cut” scale and black “single cut” scale. Allows direct transfer of the work angle to the miter saw in 3 steps with no calculations. 7-inch version also. 12-inches long 1-1/2 pounds 1-year warranty. Upside down or backwards, the reading is always correct. Ideal for carpenters, plumbers and all building trades. Scale shows angle for a miter joint and single cut. Durable 1/4-inch thick aluminum alloy teflon o-ring for smooth, precise operation. Saves time and reduces waste.
Starrett Measure Stix SM412WMERL Steel White Measure Tape with Adhesive Backing, English/Metric Graduation Style, Right To Left Reading, 12′ (3.65m) Length, 0.5″ (13mm) Width, 0.0625″ Graduation Interval
- Reads left to right or right to left. Produced with permanent adhesive back that sticks to almost any work surface for convenient, at-a-glance measurements. Easily cut to size with scissors. Mounts on work benches, saw tables, drafting tables, etc. Manufactured of high quality precision steel for extended service use.
Starrett RS-24 Steel L-Shaped Rafter/Framing Square, 24″ x 16″ Length
- The body of the square is 24″ long and 2″ wide and the tongue is 16″ long and 1-1/2″ wide. Graduations of 1/8″ and 1/16″ are on the face side and 1/10″, 1/12″ and 1/16″ are on the back. The square features rafter information and an octagonal measuring scale on the front.
Starrett 3202-6 Dial Caliper, Hardened Stainless Steel, 0-6″ Range, 0.001″ Graduation, White
- 001″ graduation in fitted case. This series features 0-6″ range and 0. The starrett dial calipers provide quick, accurate measurements of outside dimensions, inside dimensions and depth. . The dial caliper is the most versatile precision hand tool on the market and has been the first choice of metal working professionals for decades.
Starrett 70A Pocket Scriber With Hardened Steel Point, 2-3/8″ Point Length, 1/4″ Handle Diameter
- Knurled chuck holds scriber firmly. Scriber point is hardened and finely tapered so location of point is not obscured. Knurled and nickel plated steel handle. Hexagon head prevents rolling. Point can be reversed, telescoped into handle and locked by the chuck, when not in use.
Starrett KBS1224-10 Bi-Metal Unique High Speed Steel Safe-Flex Hacksaw Frame Blade, 0.025″ Thick, 24 TPI, 12″ Length x 1/2″ Width (Pack of 10)
- Measures 12-inches length by 1/2-inches width. Made with a patented solid-state diffusion process with 170 percent more high speed steel weld area and ground teeth. Bi-metal unique safe-flex hacksaw frame blade. For reduced blade fracture, faster cutting and longer life. 24 teeth per inch.
Starrett C435-12-4R Combination Set, Cast Iron Heads, Satin Chrome Blade, 12″, 4R Grad,
- Direct reading double 180 degree protractor scale. A choice of stable cast iron protractor, reversible is nicely finished with a black durable finish. Graduation no 4r, 1/8″, 1/16″, quick reading 1/32″, 1/64″. Cast iron heads with black wrinkle finish. With reversible lock bolts, scriber, spirit level in square, center heads and protractor head.
Starrett 63168 SM44W Steel Tape Measure with Adhesive Back, 1/2-Inch x 4′
- Mount on workbenches, saw tables, drafting tables, etc. High quality precision steel rule is flat with permanent adhesive back. Reads left to right or right to left. 1/2″ width has an inch/foot face (1/16″ divisions). Mounts on work benches, saw tables, drafting tables, etc. Starrett measure stix provides a tape measure that sticks to almost any work surface for convenient, at a glance measurements. Produced with permanent adhesive back that sticks to almost any work surface for convenient, at-a-glance measurements. Cut to size with scissors. Easily cut to size with scissors.
Starrett 135A Pocket Level With Satin Nickel-Plated Finish, 2-1/2″ Size
- Compact size and smooth, convex ends for fitting in a pocket. Body is hexagonal brass with a satin nickel-plated finish that resists corrosion. Glass vial resists scratching to provide clear readings. 2-1/2″ pocket spirit level for determining horizontal plane. Vial sensitivity is 17 to 21 minutes.
Starrett 70B Pocket Scriber With Hardened Steel Point, 2-7/8″ Point Length, 3/8″ Handle Diameter
- The scriber point is steel, properly hardened and finely tapered so that the location of the point is not obscured. The handle is of steel, knurled, and nickel plated. The hexagon-shaped head prevents rolling. The scriber is held firmly in the handle by a knurled chuck and when not in use can be reversed, telescoped into the handle, and locked by the chuck.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
