PFEIL “Swiss Made” 3mm # 13 Sweep V-Parting Tool
- These tools are forged and precision ground with straight sides and v-bottom edge. Pfeil carving tools and sets are “swiss made”. Principal uses include outlining, detailing, texturing, undercutting, rounding over edges, and applying decoration in chip carving. “Swiss made” implies reliability and precision. Pfeil is undoubtedly the finest carving tool on the market, second-to-none in terms of manufacturing quality and durability.
OMEX New Indexable Lathe Cut Off Parting Tool With 2Mm Carbide Insert 12 Mm
- Made from m2 high speed steel (rockwell 62/64). Parting tool. Exceptional quality tools from crown hand tools ltd, sheffield, england. Gives up to 6 times the edge life of carbon tools.
Crown 246X 1/8-Inch Diamond Parting Tool
- Gives up to six times the edge life of carbon tools. Approximate tool length is 15-inches with 8-1/2-inch handle. Made from m2 high speed steel (rockwell 62/64) and fitted with ergonomically designed stained beech handle with heavy duty brass ferrules. Diamond sections reduces frictionand burning. . Fine quality crown 1/8-inch 6mm diamond parting tool.
Hurricane Turning Tools, Woodturning Diamond Parting Tool, High Speed Steel, 3/4 Inches x 3/16 Inches, High Speed Steel
- They are made out of m2 high speed steel for superior edge holding ability and will last 8x longer between sharpenings as compared to carbon steel. Compare these tools to others that sell for two to three times the price. Ships ready for you to final sharpen. The handles are made from solid ash. This is the 3/4″ x 3/16″ woodturning diamond parting tool made from high speed steel. In addition to the high quality steel, hurricane turning tools have extra long handles, some as long at 16 inches. These tools compare with any hss tool on the market and are sold throughout the world. Hurricane turning tools are made in one of the world’s largest turning tool factories.
Parting Tool, 1/4″
- A tang collet adapter (#85406) is required for use with the sovereign system. Flat parallel sides make a rigid tool that handles well. It is used for parting off finished work from the waste material. The robert sorby standard parting tool blade is for turners who prefer to make their own turning tool handles, or for use in sorby’s sovereign system handles. Scraper is tanged at one end and measures approximately 8-3/8″ long overall. Made in england. Also useful for fine detailing of beads and fillets. High speed steel (hss) blade is 1/4″ thick.
1/16″ Robert Sorby #870H Micro Fluted Parting Tool
- Max part off diameter 4″. Free extra cutter and insertion tool included with every tool. World’s first ever replaceable carbide insert parting tool for wood turners. Blade length 2 ½ and blade width 3/32″ carbide cutter width 1/8″. Hard maple handle length 14″, tool bar length 6″.
Crown 244 1/8-Inch 3-mm Parting Tool
- Rosewood handle. Gives up to 6 times the edge life of carbon tools. Exceptional quality tools from crown hand tools ltd, sheffield, england. Made from m2 high speed steel (rockwell 62/64).
3/16″ Robert Sorby #832H Fluted Parting Tool
- This tool has a flute running along the bottom edge, creating two sharp spurs at the cutting face. Ash handles. Made in england. These spurs sever the wood fibers to produce a burnished finish. Tools have a handle length of 12″ and an overall length of 18-1/2″. The tapered profile also reduces the risk of the tool binding in the cut.
1/8″ Diamond Parting Tool
- High-speed steel blades stay sharp up to six times longer than carbon steel. High-speed steel blades are hardened to rc 62-64 and set in extra-long 16″ hardwood handles with brass ferrules. These high-quality turning tools are designed to meet the needs of any skill level woodturner, from beginner to demanding professional. Available exclusively at woodcraft, these tools represent great value and quality. Honing required before use. 6-3/4″ blades are set in 16″ hardwood handles with brass ferrules. Extra length of the handles allows greater control and comfort for those long turning sessions.
3/8″ Robert Sorby #833H Beading & Parting Tool
- Ideal for creating spigots to fit in a chuck. Has a handle length of 12″ and an overall length of 18-3/4″. Ash handle. The sorby beading & parting tool is a versatile tool used for parting off as well as producing beads. Its size makes it both very stable and very sensitive in use.
Woodstock D3829 Lathe Chisel, Small Parting Tool
- 8-inch ash handle. High speed steel. 11-3/4-inch overall length.
PFEIL “Swiss Made” 10mm # 13 Sweep V-Parting Tool
- Pfeil carving tools and sets are “swiss made”. Principal uses include outlining, detailing, texturing, undercutting, rounding over edges, and applying decoration in chip carving. These tools are forged and precision ground with straight sides and v-bottom edge. “Swiss made” implies reliability and precision. Pfeil is undoubtedly the finest carving tool on the market, second-to-none in terms of manufacturing quality and durability.
1/16″ Robert Sorby #888/3 Micro Parting Tool
- A high quality high speed steel (hss) parting tool blade for sorby’s micro tool system. Made in england. The working length of the 1/16″ thick blade is approximately 3-1/2″.
Mid-Size Easy Parting Tool
- Max part off diameter 4″. Free extra cutter and insertion tool included with every tool. World’s first ever replaceable carbide insert parting tool for wood turners. Blade length 2 ½ and blade width 3/32″ carbide cutter width 1/8″. Hard maple handle length 14″, tool bar length 6″.
Crown 244A 1/16-Inch 1.6-mm Parting Tool
- Exceptional quality tools from crown hand tools ltd, sheffield, england. Gives up to 6 times the edge life of carbon tools. Rosewood handle. Made from m2 high speed steel (rockwell 62/64).
Carter & Son Toolworks 1/8 Inch Parting Tool for the Woodworking Lathe
- Hand sharpened, this straight-sided parting tool is strong and dependable, ready for any task. This 1/8″ parting tool is machined from solid m42 high speed steel and is heat-treated for strength and durability. Nothing can replace a parting tool and the many cuts it can preform, making a strong, dependable parting tool a necessity for every turner. Order your own 1/8″ parting tool today a must have tool for every woodturner tapered for less catching perfect for pens, boxes and small projects made from premium m42 hss containing 10% cobalt hones to a finer edge superior edge holding ability hardened to 68 hrc hand sharpened made in usa specifications blade measures 1/8″ x 9-1/2″ overall tang size 1/2″ handle size 12″.
HSS 3/8″ Beading/Parting Tool By Stone Mountain Turning Tools SM7077
- The hardwood handles are 16″ long for better leverage and less fatigue when turning. This blade will stay sharp 6 time longer than carbon steel. . From the woodturner just starting out to the experienced craftsman, this wood turning tool are sure to satisfy your needs. The blades are made from high speed steel hardened to rc 62-64.
PFEIL “Swiss Made” 6mm # 15 Sweep V-Parting Tool
- Principal uses include outlining, detailing, texturing, undercutting, rounding over edges, and applying decoration in chip carving. “swiss made” implies reliability and precision. These tools are forged and precision ground with straight sides and v-bottom edge. Pfeil is undoubtedly the finest carving tool on the market, second-to-none in terms of manufacturing quality and durability. Pfeil carving tools and sets are “swiss made”.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
