Kett Tool 46-20R Complete 18 Gauge Profile Shear Head, Right Hand Cutting
- These snips are extremely light and maneuverable at 5 pounds, the kd-446r can cut tight curves at a radius of three inches. Kett 46-20r shear head for the kd-446r profile shear with right hand blades. Cuts profile and flat materials up to 18 gauge, spiral duct, wire mesh and many other materials. The blades are made of high quality steel, heat treated and precision ground.
Kett Tool 46-20L Complete 18 Gauge Profile Shear Head, Left Hand Cutting
- Kett 46-20l shear head for the kd-446l profile shear with left hand blades. . Cuts profile and flat materials up to 18 gauge, spiral duct, wire mesh and many other materials. These snips are extremely light and maneuverable at 5 pounds, the kd-446l can cut tight curves at a radius of three inches. The blades are made of high quality steel, heat treated and precision ground.
Kett 60-23 18ga. alum. shear head
- Rated for 600v and 90 degrees c. Shear housing. Meets ansi c1194 requirements and is ul 486b listed. Insulation-piercing connector for tapping or splicing electrical lines. Can be used in copper-to-copper, copper-to-aluminum, and aluminum-to-aluminum solid or stranded wire applications.
DEWALT DC490KA 18-Volt Cordless 18 Gauge Swivel Head Shear Kit
- Weighs 61 pounds. Head swivels 360 degree which allows user to access tight quarters while maintaining comfort. Cuts 7/32-inch strip which continuously curls out of the cutting area providing consistent and accurate cuts. Included with shear one-hour charger, two xrp batteries, blade wrench, and heavy-duty kit box. Cordless tool allows user to take the tool to the work piece.
Kett Tool 70-20 Shear Head
- Kett 60-20 18 gauge shear head unit (for models kd-200, p-500, p-1060, b-100, k-100 and k-200). 8-inch steel blades cut smoothly and cleanly. Friskers/wallace hedge shear with 8 inch cutting length hedge shears. Milwaukee 48-08-0500 18 gauge shear head assembly (acc). Shear head complete assy.
Kett Tool 41-20 Shear Head
- Insulation-piercing connector for tapping or splicing electrical lines. Rated for 600v and 90 degrees c. Meets ansi c1194 requirements and is ul 486b listed. Can be used in copper-to-copper, copper-to-aluminum, and aluminum-to-aluminum solid or stranded wire applications. Shear housing.
Kett Tool 95-20 5/8″ Capacity Fiber Cement Shear Head Complete
- For cutting fiber-cement. . 5/8″ capacity steel shear head. Used on the kd-1495 shear.
Kett 60-20 18 Gauge Shear Head Unit (for models KD-200, P-500, P-1060, B-100, K-100 and K-200)
- 60-20 shear head. Fits on any kett pistol grip or straight handle motor. 18 gauge shear head. Double-cut shear.
K-Tool International (KTI89220) Shear Head Attachment
- Shear head attachment. Factory sealed. Shears replacement. Headmilwaukee model 48-08-0500. Newauthorized dealer—-.
Kett Tool 93-20 Shear Head
- Meets ansi c1194 requirements and is ul 486b listed. Rated for 600v and 90 degrees c. Insulation-piercing connector for tapping or splicing electrical lines. Can be used in copper-to-copper, copper-to-aluminum, and aluminum-to-aluminum solid or stranded wire applications. Shear housing.
K-Tool International (KTI89220) Shear Head Attachment by K-Tool International
- K-tool international (kti89220) shear head attachment. 1-1/4″ bore. 56mm width. 3+3 alternate shear knives. 4200-7500 rpm’s.
Shear Head Complete Assy
- Non-slip grips for safety and control. Shear head complete assy. 8-inch steel blades cut smoothly and cleanly. Friskers/wallace hedge shear with 8 inch cutting length hedge shears. Non slip grips for safety and control.
Milwaukee 48-08-0500 Shear Head Assembly 18 Gauge
- The product is durable. Assembly 18 ga shear head. The product is easy to use. The product is manufactured in china. .
Shear Head Attachment Tools Equipment Hand Tools
- Replacement shear head attachment for 89218this product meets the oversized requirement per ups/fedex. The shipping weight reflected is the dimensional weight. The estimated shipping cost will include this fee. This product also meets the large package requirement per ups/fedex.
Kett 40-20 14 Gauge Steel Shear Head Unit (for models KD-440, P-540, P-1040, E-140 and KC-140)
- 16 gauge shear head. Double-cut shear. Fits on any kett pistol grip or straight handle motor. 14 gauge steel shear head, used on kd-440, p-540, p-1040 and discontinued e-140 and kc-140 shears. 40-20 shear head.
Kett 80-20H Shear Head without 60-24 Eccentric Bearing Assembly
- The unique scissors action cuts light materials without fouling or gouging. The large rabbit ear blades funnel thick, soft materials into the scissor jaws. Produces a clean, flowing cut. Stationary bottom blade. Used for cutting pliable material.
Stark TH05 Compression Shear Head
- For jointing or copy-shading board materials, veneered or laminated on one or both sides. 180 mm recommended for tenoners. Uses standard 30x12x1. Excellent for melamine, veneer or solid woods. Avoids chipping the veneer or laminate. Shear angle, turned towards the inside. 5 mm carbide knives.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
