Top 17 Best 4 Jaw Chucks

 

Hurricane Turning Tools HTC100 4-Inch Woodturning 4 Jaw Chuck Kit with Dovetail Jaws for Wood Lathes with 1 1/4 x 8-Inch TPI Spindles - Available in several spindle threads to suit almost all lathes. We would like to introduce you to the hurricane htc100 100mm 4 jaw self centering woodturning chuck. It provides a superb grip on your woodturning projects such as bowls and platters. Please note that this chuck is the smaller in size of the two hurricane chucks. If you are looking for a massive chuck for medium to super large bowls, check out the htc125 5″ chuck in our amazon store. It is perfect if you only want one chuck and you switch between a mini lathe and a full size lathe. This is an outstanding quality chuck that compares to some of the “famous names” on the market. It is a great size for full-size / midi and mini lathes. Many optional jaw sets are available (sold separately) for various woodturning applications. This is a 4″ chuck which compares in size to the oneway talon, novatech, etc chucks.

 

Lathe Chuck, 4-Jaw 5″ - 5 inch, 4-jaw independent lathe chuck. The chuck can hold work up to 125 mm (4. The through bore of this chuck is 30 mm (1. 92″) in diameter. Each jaw is independently adjustable and reversible. 18″).

 

Grizzly G8784 4-Jaw Chuck for Round-Piece - Chuck wrenches included. Specifications • size 1-inch • tpi 8. Perfect for bowl turning the jaws of this chuck grip round stock as well as expand within a recess turned in the back of the workpiece. Twist adjustment moves jaws concentrically from 2-inch to 2-3/4-inch odd.

 

Multifunction 4 Jaw chuck Mini lathe Wooden bead machine Woodworking lathe 220V - Side of the motor has two heads, an installation tool to make beads, one can in turn be used to install the chuck polished beads. Small size, easy to carry, structural optimization, high quality stainless steel with 15mm thickness and strength greatly enhanced. 4 jaw chuck can clamp square and round wood. Dual speed motors, two-switch can be perforated polished honed polished wood beads carved-in-one. The electronic variable speed function, with power indicator easier to operate and control, low noise aluminum belt drive.

 

Steelex M1061 4 Jaw Chuck, 6-Inch - Plain back. 1-1/2-inch bore. 6-inch 4-jaw independent. Reversible jaws.

 

Grizzly H6268 1-Inch Pin Jaws For 4 Jaw Chuck - . Fits a 1″ diameter recess. Pin jaws are designed for mounting bowls by expanding into a recess inside the bottom of the workpiece. A dovetailed lip grips the workpiece securely for safe and confident turning.

 

Sherline 3058 – 4-Jaw Chuck Hold-down Set - They are the same as those furnished with the sherline milling vise (p/n 3551) and rotary table (p/n 3700), so they are not needed if you already own either of these accessories. The clamps fit in a groove machined around the circumference of the 4-jaw chuck. The set provides a little more versatility than the chuck-to-t-slot adapter (p/n 1187) in that the chuck can be located almost anywhere on the table, and the part can be properly aligned with the axis of the machine. This set consists of two clamps complete with screws and t-nuts and can be used to clamp the 4-jaw chuck to the milling table or lathe crosslide.

 

Woodstock D4054 3-Inch 4 Jaw Chuck 1-Inch by 8 TPI - Two 4-inch wrenches are included for final tightening. Fits all wood lathes with 1-inch by 8 tpi spindles. Self-centering.

 

Proxxon 24030 Four Jaw Chuck - Accessories for lathe-system pd 230/e and milling systems pf 230 and ff 230. The jaws are reversible and hardened, giving a capacity of 3 5/32″ (80 mm). The work piece must be centered manually. This feature allows clamping unsymmetrical pieces such as ovals, squares or other odd-shaped work pieces. Model # 24030 features four jaws are adjusted independently and allows for clamping unsymmetrical pieces such as ovals, squares and other odd shapes proxxon precision german engineering for solving intricate turning and milling tasks. All accessories meet the high german quality standards four jaw chuck the 4 jaws are adjusted independently.

 

NOVA JS-SP45 45mm Spigot Chuck Accessory Jaw Set - Special nova dovetail profile, designed to maximum strength and holding in wood turning, without crushing wood fibers. 2-year warranty. Same jaw fixing system across all nova chuck models, total system interchangeability. Provides a strong contracting grip to unsupported spigot turning applications such as vases and goblets. All nova chuck accessory jaws are designed to hold in the expansion and contraction modes.

 

Lathe Chuck, 4-Jaw 6″ - 6 inch, 4-jaw independent lathe chuck. 30″ (160 mm) in diameter. This is a plain back chuck and requires a backplate adapter to mount it. The chuck can hold work up to 6. Each jaw is independently adjustable and reversible. This chuck has a 1. . 77″ (45 mm) through hole.

 

Lathe Chuck, 4-Jaw 4″ with Adapter - It includes a chuck key and reversible jaws. This chuck has a 0. 94″ (100 mm) in diameter. The chuck can hold work up to 3. 98″ (25 mm) through hole. The adapter mounts to the spindle with three studs so additional holes in the spindle are not required. This 4 inch 4-jaw independent chuck includes an adapter to fit the mini lathe spindle.

 

HHIP 3900-3315 Backplate for 6″ 3 or 4 Jaw Chucks with No Hole, 1 1/2″ – 8″ - . Machining is required before mounting your chuck to ensure concentricity. For 3 & 4-jaw chucks. Threaded 1 1/2-8 backplate/adapter for 6″ lathe chucks no bolt holes.

 

1″ x 8 TPI Self-Centering 4-Jaw Chuck - To adjust the quick action on the chuck simply insert the locking levers into the chuck and rotate them in opposite direction to grip in the contraction mode or expansion mode. The savannah self-centering 4 jaw woodturning chuck has a large range of jaw adjustability. The chuck body is chrome plated and the jaws are black anodized to protect against corrosion. The chuck comes with a screw chuck that does not require any accessories or disassembly to use. The powerful jaws will grip and expand in a 2″ to 3″ dovetail recess in the base of your project.

 

BISON 4 Jaw Plain Back Independent Lathe Chuck – Number OF JAWS: 4 CHUCK SIZE: 6″ - Chuck bodies are semi-steel. Thrust bearings and operating screws are made of case hardened steel. Jaws are made of high quality carbon steel and hardened. Jaws are individually adjustable, allowing firm gripping of odd shaped work. Spindle 165″.

 

Lathe Chuck, 4-Jaw 4″ - It includes a chuck key. 94″ (100 mm) in diameter. The chuck can hold work up to 3. This chuck has a 0. This 4 inch 4-jaw chuck requires an adapter for the mini lathe, but it fits the standard backplate for 9×20 lathes (with the addition of three more bolt holes). 98″ (25 mm) through hole.

 

New 4″ Inches(100mm) Quality Rotary Table +70 mm 4 Jaw Chuck+ Back Plate+ Fixings - Worm gear ratio -136, which means that the 1 handle rotation shall turn the table by 10 degrees. The chuck mounting is standard unimat thread m14 x 1. Center height in vertical position 2-1/16″ (50 mm approx) hand wheel is graduated in divisions of 10 min & can be set to zero. Supplied with a mounting back plate & fixing tee nuts with screws. Can be mounted both in horizontal & vertical position. Description description of 4″ (100 mm) rotary table designed for smaller milling machines. Same jaws are reversible as well. Description of the chuck a high quality 4 jaw independent chuck, the body of which is made from sg iron & jaws are of tool steel hardened & ground. The back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. Table diameter 100 mm table is graduated 360 degrees.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.