Wedge Anchor 304 Stainless Steel – 3/8″-16 x 3-3/4″ Qty-10
- Wedge anchors, concrete anchors, or masonry anchors are designed to be installed into solid concrete. Wedge anchors can be used to fasten objects to concrete. These anchors can be used for some of the following concrete applications shelving, railing, duct work, signs, electric pipe, light fixtures, escalators, etc. Wedge anchors cannot be used on brick or block.
STB2-50812 1/2″ X 8-1/2″ Strong-Bolt 2 Carbon Steel Wedge Anchor 25/pk
- High-strength alloy clip on carbon-steel anchors. 1/2″ x 8-1/2″ wedge anchors. 25 wedge anchors per box. Category 1 anchor classification. Strongbolt 2 wedge anchor for cracked and uncracked concrete.
3/4 in. x 7 in. Strong-Bolt 2 Wedge Anchor (10-Pack)
- Tri-segmented clip. Length identification on head of fastener. Category 1 anchor classification. High-strength alloy clip on carbon-steel anchors. Dual embossments on each clip segment.
Strong Bolt STB2-37500 Wedge Anchor 3/8-Inch by 5-Inch, 50-Piece
- Following rigorous testing according to icc-es acceptance criteria, the strong-bolt 2 anchor received classification as a category 1 anchor, the highest attainable anchor category for performance in cracked concrete under static and seimic loading. . The strong-bolt 2 wedge anchor is the next generation solution for cracked and uncracked concrete. Code listed by icc-es under the 2009 ibc requirements for post-installed anchors in cracked and uncracked concrete.
Simpson Strong Tie STB2-50434 Strong Bolt 2 Wedge Anchor 1/2″ by 4-3/4″ (25 per Box)
- This special alloy clip offers improved performance. The strong-bolt 2 anchor can be installed in cracked concrete with a minimum thickness of 3Â 1/4″. Enables clip to undercut into the concrete. The strong-bolt 2 anchor received classification as a category 1. Each segment adjusts independently.
The Hillman Group 370986 Wedge Anchor, 3/8 X 5-Inch, 10-Pack
- Has various dot approvals including cal trans listing for “stud mechanical expansion anchors”. The power-stud is a torque controlled, wedge expansion anchor that is designed for concrete applications. . It is building code approved and can also be used with treated lumber.
Hard-to-Find Fastener 014973443153 Wedge Anchors, 1/2 x 7-Inch
- . Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Not all fasteners are applicable for all applications so be certain to test thouroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person. We also sell coated and stainless products for additional rust resistance.
Wedge Anchor 304 Stainless Steel – 1/2″-13 x 4-1/4″ Qty-10
- These anchors can be used for some of the following concrete applications shelving, railing, duct work, signs, electric pipe, light fixtures, escalators, etc. Wedge anchors can be used to fasten objects to concrete. Wedge anchors cannot be used on brick or block. Wedge anchors, concrete anchors, or masonry anchors are designed to be installed into solid concrete.
Wedge Anchor 304 Stainless Steel – 3/8″-16 x 3″ Qty-10
- These anchors can be used for some of the following concrete applications shelving, railing, duct work, signs, electric pipe, light fixtures, escalators, etc. Wedge anchors can be used to fasten objects to concrete. Wedge anchors cannot be used on brick or block. Wedge anchors, concrete anchors, or masonry anchors are designed to be installed into solid concrete.
Wej-It Ankr-TITE ATSS Wedge Anchor, 316 Stainless Steel, Meets QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1 Specifications, 5/8″ Diameter, 6″ Length, 4″ Threaded Length (Pack Of 5)
- Meets fed specs qqz-325z type ii class 3 and gsa ffs-325 group ii type 4 class 1, and complies with miami-dade noa #08-091102 code. Wedge anchor provides a secure hold in solid masonry and uncracked concrete. Ultimate tensile strength is 9,527 lb at 2-5/8″ embedment depth in 4,000-psi concrete with a static load. Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). Anchor consists of a 316 stainless steel body, washer, nut, and clip to provide more corrosion resistance than steel and 304 stainless steel anchors.
Strong Bolt STB2-62700 Wedge Anchor 5/8-Inch by 7-Inch, 20-Piece
- Code listed by icc-es under the 2009 ibc requirements for post-installed anchors in cracked and uncracked concrete. The strong-bolt 2 wedge anchor is the next generation solution for cracked and uncracked concrete. Following rigorous testing according to icc-es acceptance criteria, the strong-bolt 2 anchor received classification as a category 1 anchor, the highest attainable anchor category for performance in cracked concrete under static and seimic loading. .
(8) Concrete Wedge Anchor Bolts 3/4 x 7 Includes Nuts & Washers
- Nuts and flat washers are included. Lot of (8) wedge anchor bolts. . These zinc plated anchors are 3/4-10 thread and are 7″ in length.
(500pcs) 3/8″ X 2-1/4″, Wedge Anchors, Steel, Zinc Plated, Ships FREE in USA by Aspen Fasteners, XAMAN045-38X214-000500
- 3/8″ x 2-1/4″. Aspen fasteners stocks over 400,000 different fasteners for immediate delivery also, through our partners we have access to virtually every fastener type standard and specialty items by print if you have any questions or can’t find what you are. Wedge anchors, steel, zinc plated. Volume price breaks available contact aspen fasteners.
The Hillman Group 370987 Wedge Anchor, 1/2 X 2-3/4-Inch, 12-Pack
- Has various dot approvals including cal trans listing for “stud mechanical expansion anchors”. . It is building code approved and can also be used with treated lumber. The power-stud is a torque controlled, wedge expansion anchor that is designed for concrete applications.
Strong Bolt STB2-50512 Wedge Anchor 1/2-Inch by 5-1/2-Inch, 25-Piece
- Following rigorous testing according to icc-es acceptance criteria, the strong-bolt 2 anchor received classification as a category 1 anchor, the highest attainable anchor category for performance in cracked concrete under static and seimic loading. The strong-bolt 2 wedge anchor is the next generation solution for cracked and uncracked concrete. . Code listed by icc-es under the 2009 ibc requirements for post-installed anchors in cracked and uncracked concrete.
1/2″ X 3-3/4″ Wedge Anchors (Box of 50)
- Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). Meets fed specs qqz-325z type ii class 3 and gsa ffs-325 group ii type 4 class 1, and complies with miami-dade noa #08-091102 code. 1/2″ x 3-3/4″ wedge anchors (box of 50). Ultimate tensile strength is 16,591 lb at 4″ embedment depth in 4,000-psi concrete with a static load. Anchor consists of a zinc-plated carbon steel body, a zinc-coated steel washer and nut, and a steel clip, which expands to secure the anchor in place as the nut is tightened.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
