Magnate 7601D Pattern Router Bits – 1/2″ Cutting Diameter; 3/8″ Cutting Length; 1/4″ Shank Diameter
- This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. To be used for pattern routing and template work by placing a template above the piece of wood to be cut, the router can glide against the template creating a multitude of interesting patterns. Excessive overall length may cause tool damage. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is also equipped with wide open gullets for easy disposal of wood chips. You may try the following suggestion. In case a bit doesn’t come with a speed chart. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is suited for softwoods, hardwoods, chipboard, plywood and etc.
Kyocera Up Cut Diamond Pattern Router Bit 1.00mm Diameter 3mm Shank 5mm Length of Cut 38mm Overall Length Uncoated Fish Tail 2120-0394.197F
- End type fish tail, reach n/a, radius n/a, point angle n/a. Coating uncoated, flutes n/a. Diameter 100mm, shank 3mm, length of cut 5mm, overall length 38mm. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Kyocera 2120-0394197f up cut diamond pattern router bit.
Kyocera Down Cut Diamond Pattern Router Bit 3/16in Diameter 3/16in Shank 0.625in Length of Cut 2in Overall Length DLC Coated Fish Tail 2121-1875D2625F
- Diameter 3/16in, shank 3/16in, length of cut 0625in, overall length 2in. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Coating dlc coated, flutes n/a. End type fish tail, reach n/a, radius n/a, point angle n/a. Kyocera 2121-1875d2625f down cut diamond pattern router bit.
Kyocera Up Cut Diamond Pattern Router Bit 8.00mm Diameter 8mm Shank 25mm Length of Cut 63mm Overall Length CVD DiaTiger Fish Tail 2120-3150V984F
- Coating cvd diatiger, flutes n/a. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Diameter 800mm, shank 8mm, length of cut 25mm, overall length 63mm. Kyocera 2120-3150v984f up cut diamond pattern router bit. End type fish tail, reach n/a, radius n/a, point angle n/a.
Kyocera Down Cut Diamond Pattern Router Bit 1/32in Diameter 1/8in Shank 0.255in Length of Cut 1 1/2in Overall Length CVD DiaTiger Drill Point 2121-0312V255D
- Coating cvd diatiger, flutes n/a. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Diameter 1/32in, shank 1/8in, length of cut 0255in, overall length 1 1/2in. Kyocera 2121-0312v255d down cut diamond pattern router bit. End type drill point, reach n/a, radius n/a, point angle 130 degrees.
Yonico 14137 Pattern/Flush Trim Router Bit with 3/4-Inch W X 1-1/2-Inch H 1/2-Inch Shank
- In a router table, template will be positioned underneath the work piece. Shank 1/2″, width 3/4″, cutter height 1-1/2″. Two flute carbide cutters with enclosed ball bearing. For increased work piece visibility, use in a handheld router allowing the template to be positioned on top of the work piece. Can be used without the bearing as a standard straight bit. Great for combined plunge-cutting and pattern and template routing.
Magnate 7602D Pattern Router Bits – 5/8″ Cutting Diameter; 3/8″ Cutting Length; 1/4″ Shank Diameter
- To be used for pattern routing and template work by placing a template above the piece of wood to be cut, the router can glide against the template creating a multitude of interesting patterns. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is suited for softwoods, hardwoods, chipboard, plywood and etc. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is also equipped with wide open gullets for easy disposal of wood chips. Excessive overall length may cause tool damage. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. You may try the following suggestion. In case a bit doesn’t come with a speed chart. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications.
Kyocera USA Made Down Cut Diamond Pattern Router Bit Uncoated 1/32in Diameter 1/8in Shank 0.255in LOC 1 1/2in OAL Series 2121 (2121-0312.255F)
- This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. 1/32in diameter. 1/8in shank. 0255in length of cut. 1 1/2in overall length.
Kyocera Up Cut Chipbreaker Pattern Router Bit 8.00mm Diameter 8mm Shank 25mm Length of Cut 63mm Overall Length Fish Tail DLC Coated (2320-3150D984F)
- This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Excellent for cfrp, fiberglass, and composite materials also check out our line of vulcan high performance compression routers. 800mm diameter, 8mm shank, 25mm length of cut, 63mm overall length, fish tail. Submicron grain carbide, chips exhausted upwards, for finer part edge finishes. Kyocera up cut chipbreaker pattern router bit dlc coated (2320-3150d984f).
Kyocera Up Cut Chipbreaker Pattern Router Bit 1/8in Diameter 1/8in Shank 0.500in Length of Cut 1 1/2in Overall Length Drill Point Uncoated (2320-1250.500D)
- 1/8in diameter, 1/8in shank, 0500in length of cut, 1 1/2in overall length, drill point. Submicron grain carbide, chips exhausted upwards, for finer part edge finishes. Excellent for cfrp, fiberglass, and composite materials also check out our line of vulcan high performance compression routers. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Kyocera up cut chipbreaker pattern router bit uncoated (2320-1250500d).
Kyocera Up Cut Diamond Pattern Router Bit 3.00mm Diameter 3mm Shank 12mm Length of Cut 38mm Overall Length CVD DiaTiger Drill Point 2120-1181V472D
- Coating cvd diatiger, flutes n/a. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Kyocera 2120-1181v472d up cut diamond pattern router bit. Diameter 300mm, shank 3mm, length of cut 12mm, overall length 38mm. End type drill point, reach n/a, radius n/a, point angle 130 degrees.
Yonico 14138 Pattern/Template Trim Router Bit with 15/16-Inch X 3/4-Inch 1/2-Inch Shank
- Build-up & heat resistant teflon coating. Industrial quality router bits. Build-up and heat resistant teflon coating. Satisfaction guaranteed and lifetime warranty. Solid hardened steel bodies with anti-kickback design. C3 micro-grain tungsten carbide cutters. Satisfaction guaranteed & lifetime warranty.
Kyocera USA Made Down Cut Diamond Pattern Router Bit Uncoated 1/8in Diameter 1/8in Shank 0.5in LOC 1.5in OAL Series 2121 (2121-1250.500D)
- 15in overall length. 1/8in shank. 05in length of cut. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. 1/8in diameter.
Magnate 2603 Palace Pattern Router Bits – 3/4″ Cutting Length; 1/4″ Cutting Depth
- Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Excessive overall length may cause tool damage. It is also equipped with wide open gullets for easy disposal of wood chips. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. You may try the following suggestion. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. In case a bit doesn’t come with a speed chart.
Woodline USA’s WL-1406 Top Bearing Pattern Router Bit 1/2-Inch Shank, 1-1/8-Inch Cutting Diameter, 1-Inch Cutting Length With 1-1/8-Inch Bearing
- Carbide tipped router bit with anti-kickback design. 1″ cutting length. Excellent for template work. 1-1/8-inch diameter, 1/2-inch shank. Anti kickback design.
Kyocera Down Cut Diamond Pattern Router Bit 5.00mm Diameter 5mm Shank 20mm Length of Cut 50mm Overall Length Uncoated Drill Point 2121-1968.787D
- End type drill point, reach n/a, radius n/a, point angle 130 degrees. Diameter 500mm, shank 5mm, length of cut 20mm, overall length 50mm. Kyocera 2121-1968787d down cut diamond pattern router bit. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Coating uncoated, flutes n/a.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
