Top 15 Parting Tools

 

Woodstock D3829 Lathe Chisel Small Parting Tool

Woodstock D3829 Lathe Chisel, Small Parting Tool

Woodstock D3829 Lathe Chisel, Small Parting Tool - 11-3/4-inch overall length. 8-inch ash handle. High speed steel.

 

38 Robert Sorby 833H Beading Parting Tool

3/8″ Robert Sorby #833H Beading & Parting Tool

3/8″ Robert Sorby #833H Beading & Parting Tool - Its size makes it both very stable and very sensitive in use. Ideal for creating spigots to fit in a chuck. Has a handle length of 12″ and an overall length of 18-3/4″. The sorby beading & parting tool is a versatile tool used for parting off as well as producing beads. Ash handle.

 

PFEIL Swiss Made 6mm  15 Sweep V-Parting Tool

PFEIL “Swiss Made” 6mm # 15 Sweep V-Parting Tool

PFEIL “Swiss Made” 6mm # 15 Sweep V-Parting Tool - Principal uses include outlining, detailing, texturing, undercutting, rounding over edges, and applying decoration in chip carving. Pfeil is undoubtedly the finest carving tool on the market, second-to-none in terms of manufacturing quality and durability. Pfeil carving tools and sets are “swiss made”. “swiss made” implies reliability and precision. These tools are forged and precision ground with straight sides and v-bottom edge.

 

Crown 245 14-Inch 6mm Parting Tool

Crown 245 1/4-Inch 6mm Parting Tool

Crown 245 1/4-Inch 6mm Parting Tool - 16-1/2-inch and has a beech wood stained handle. Essentially they are a chisel that cuts rather than scrapes. Fine quality crown 1/4-inch 6mm parting tool gives turners a real choice. Overall length of tool is approx. After your turning and finishing is done they can be used to cut your work to length. 6-3/4-inch long. Blade is made from m2 high speed steel (rockwell 62/64) and is approx. . They can be used as a scraper to a chisel for making beads.

 

Mid-Size Easy Parting Tool

Mid-Size Easy Parting Tool

Mid-Size Easy Parting Tool - Say goodbye to sharpening tool comes with the easy flex key and one replacement carbide cutter. This revolutionary easy wood tool is the easiest, safest, and most versatile parting tool you will ever use, the only 1/8″ parting tool you will ever need to purchase simply advance the easy parting tool slowly into the workpiece, and begin cutting straight in. It’s that simple the exclusive wedge-lock mounting system ensures a secure hold for the replaceable carbide cutter. Once dull, you can easily remove and install a fresh sharp cutter using the provided flex key. .

 

Narex Lathe Wood Turning Parting Tool Chisel 4 mm x 14 mm x 105 mm Blade Alloyed Tool Steel 60 HRc 817210

Narex Lathe Wood Turning Parting Tool Chisel 4 mm x 14 mm x 105 mm Blade Alloyed Tool Steel 60 HRc 817210

Narex Lathe Wood Turning Parting Tool Chisel 4 mm x 14 mm x 105 mm Blade Alloyed Tool Steel 60 HRc 817210 - Overall length of tool is 345 mm (14″). Handles are natural varnished european beech wood. Parting tool chisel blade is 4 mm (3/16″) thick by 14 mm (9/16″) wide by 105 mm (425″) long. Blades are heat treated allow tool steel and hardened to hrc 60 and will hold an excellent edge. This lathe tool is made by a small tool manufacturer in the czech republic.

 

Crown 246 316-Inch 5-mm Diamond Parting Tool

Crown 246 3/16-Inch 5-mm Diamond Parting Tool

Crown 246 3/16-Inch 5-mm Diamond Parting Tool - Exceptional quality tools from crown hand tools ltd, sheffield, england. Rosewood handle. Made from m2 high speed steel (rockwell 62/64). Gives up to 6 times the edge life of carbon tools.

 

14 Robert Sorby 830 Parting Tool Blade

1/4″ Robert Sorby #830 Parting Tool Blade

1/4″ Robert Sorby #830 Parting Tool Blade - Flat parallel sides make a rigid tool that handles well. A standard parting tool blade for turners who prefer to make their own handles, or for use in sorby’s sovereign system handles. A tang collet adapter (#85406) is required for use with the sovereign system. Also useful for fine detailing of beads and fillets. For parting off finished work from the waste material. Made in england. Scraper is tanged at one end and measures approximately 8-3/8″ long overall. High speed steel (hss) blade is 1/4″ thick.

 

Carter Son Toolworks 316 Inch Parting Tool for the Woodworking Lathe

Carter & Son Toolworks 3/16 Inch Parting Tool for the Woodworking Lathe

Carter & Son Toolworks 3/16 Inch Parting Tool for the Woodworking Lathe - Order your own 3/16″ parting tool today a must have tool for every woodturner tapered for less catching perfect for pens, boxes and larger projects made from premium m42 hss containing 10% cobalt hones to a finer edge superior edge holding ability hardened to 68 hrc hand sharpened made in usa specifications blade measures 3/16″ x 9-1/2″ overall tang size 1/2″ handle size 12″. Hand sharpened, this straight-sided parting tool is strong and dependable, ready for any task. Nothing can replace a parting tool and the many cuts it can preform, making a strong, dependable parting tool a necessity for every turner. This 3/16″ parting tool is machined from solid m42 high speed steel and is heat-treated for strength and durability. This larger size parting tool is perfect for your larger projects.

 

Narex Full Size Professional Lathe Wood Turning Parting Tool Chisel 4 mm x 18 mm x 150 mm High Speed Tool Steel Blade 465 mm Overall Length 64 HRc 818203

Narex Full Size Professional Lathe Wood Turning Parting Tool Chisel 4 mm x 18 mm x 150 mm High Speed Tool Steel Blade 465 mm Overall Length 64 HRc 818203

Narex Full Size Professional Lathe Wood Turning Parting Tool Chisel 4 mm x 18 mm x 150 mm High Speed Tool Steel Blade 465 mm Overall Length 64 HRc 818203 - Handle is natural varnished european beech wood. Parting tool chisel blade is 4 mm (3/16″) thick by 18 mm (3/4″) wide by 150 mm (6″) long. Overall length of tool is 465 mm (19″). This lathe tool is made by a small tool manufacturer in the czech republic. Blade is heat treated high tool steel and hardened to hrc 64 and will hold an excellent edge.

 

116 Robert Sorby 865H Micro Parting Tool

1/16″ Robert Sorby #865H Micro Parting Tool

1/16″ Robert Sorby #865H Micro Parting Tool - High speed steel (hss) blade. Made in england. A smaller parting tool sized for the delicacy and control required for smaller projects and fine detail work. Parting tool has a 6-1/4″ handle and is 10″ long overall. The 1/16″ blade enables parts that are very precise. Ash handle.

 

Narex 5 Piece Set Mini Miniature Lathe Wood Turning Chisels Tools with Parting Tool Round Scraper Right Skew and 2 Mini Gouges 859400

Narex 5 Piece Set Mini Miniature Lathe Wood Turning Chisels Tools with Parting Tool, Round Scraper, Right Skew and 2 Mini Gouges 859400

Narex 5 Piece Set Mini Miniature Lathe Wood Turning Chisels Tools with Parting Tool, Round Scraper, Right Skew and 2 Mini Gouges 859400 - Contains 3 mm parting tool, 3 mm round nose scraper, 3 mm right skew and 3 and 4 mm gouges. This 5 piece set of woodworking tools is made by a small tool manufacturer in the czech republic. Blades 50 mm (2″) long, beech handles 180 mm (7 3/8″), overall lengths 230 mm (9 3/8″). The blades are made from high speed steel and hardened to rc 64. They come in a wood presentation box.

 

HSS 18 Diamond Parting Tool By Stone Mountain Turning Tools SM7082

HSS 1/8″ Diamond Parting Tool By Stone Mountain Turning Tools SM7082

HSS 1/8″ Diamond Parting Tool By Stone Mountain Turning Tools SM7082 - From the woodturner just starting out to the experienced craftsman, this wood turning tool are sure to satisfy your needs. This blade will stay sharp 6 time longer than carbon steel. The hardwood handles are 16″ long for better leverage and less fatigue when turning. The blades are made from high speed steel hardened to rc 62-64.

 

PFEIL Swiss Made 30mm  13 Sweep V-Parting Tool

PFEIL “Swiss Made” 30mm # 13 Sweep V-Parting Tool

PFEIL “Swiss Made” 30mm # 13 Sweep V-Parting Tool - These tools are forged and precision ground with straight sides and v-bottom edge. Pfeil is undoubtedly the finest carving tool on the market, second-to-none in terms of manufacturing quality and durability. Principal uses include outlining, detailing, texturing, undercutting, rounding over edges, and applying decoration in chip carving. . “Swiss made” implies reliability and precision. Pfeil carving tools and sets are “swiss made”.

 

Crown 246X 18-Inch Diamond Parting Tool

Crown 246X 1/8-Inch Diamond Parting Tool

Crown 246X 1/8-Inch Diamond Parting Tool - Made from m2 high speed steel (rockwell 62/64) and fitted with ergonomically designed stained beech handle with heavy duty brass ferrules. Diamond sections reduces frictionand burning. Approximate tool length is 15-inches with 8-1/2-inch handle. Fine quality crown 1/8-inch 6mm diamond parting tool. Gives up to six times the edge life of carbon tools. .





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.