Top 15 10 24 Threads for 2020

 

Steel Machine Screw Zinc Plated Finish Pan Head Phillips Drive 1-14 Length 10-24 Threads Pack of 100 #ad

Steel Machine Screw, Zinc Plated Finish, Pan Head, Phillips Drive, 1-1/4″ Length, #10-24 Threads (Pack of 100)

Steel Machine Screw, Zinc Plated Finish, Pan Head, Phillips Drive, 1-1/4″ Length, #10-24 Threads (Pack of 100) #ad - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Zinc plating resists corrosion resistance and has a reflective appearance. Steel is often used in applications where strength is the primary consideration. Pan head has a flat top and short vertical sides with a rounded top edge.

 

Stainless Steel Machine Screw Plain Finish Fillister Head Slotted Drive Meets ASME B1863 58 Length Fully Threaded 10-24 Threads Pack of 100 #ad

Stainless Steel Machine Screw, Plain Finish, Fillister Head, Slotted Drive, Meets ASME B18.6.3, 5/8″ Length, Fully Threaded, #10-24 Threads (Pack of 100)

Stainless Steel Machine Screw, Plain Finish, Fillister Head, Slotted Drive, Meets ASME B18.6.3, 5/8″ Length, Fully Threaded, #10-24 Threads (Pack of 100) #ad - Meets asme b1863 specifications. Fillister head has a slightly rounded top and tall cylindrical sides, enabling a deep drive slot for high driving force. Plain surface has no finish or coating. Stainless steel provides corrosion resistance. Slotted drive has a linear slot for use with a flat-blade driver.

 

18-8 Stainless Steel Machine Screw Plain Finish Oval Head Phillips Drive 1-14 Length 10-24 Threads Pack of 50 #ad

18-8 Stainless Steel Machine Screw, Plain Finish, Oval Head, Phillips Drive, 1-1/4″ Length, #10-24 Threads (Pack of 50)

18-8 Stainless Steel Machine Screw, Plain Finish, Oval Head, Phillips Drive, 1-1/4″ Length, #10-24 Threads (Pack of 50) #ad - Oval head is cone shaped for a flush fit in a countersunk hole and has a slightly rounded top that sits above the mated surface. 18-8 stainless steel provides good corrosion resistance and strength. Plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

Stainless Steel Machine Screw Plain Finish Pan Head Phillips Drive 2-12 Length 10-24 Threads Pack of 100 #ad

Stainless Steel Machine Screw, Plain Finish, Pan Head, Phillips Drive, 2-1/2″ Length, #10-24 Threads (Pack of 100)

Stainless Steel Machine Screw, Plain Finish, Pan Head, Phillips Drive, 2-1/2″ Length, #10-24 Threads (Pack of 100) #ad - Plain surface has no finish or coating. Stainless steel provides corrosion resistance. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge.

 

Steel Truss Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 10-24 Thread Size 34 Length Fully Threaded Imported Pack of 100 #ad

Steel Truss Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 3/4″ Length, Fully Threaded, Imported (Pack of 100)

Steel Truss Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 3/4″ Length, Fully Threaded, Imported (Pack of 100) #ad - They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes.

 

Steel Machine Screw Zinc Plated Finish Flat Head Phillips Drive 2 Length 10-24 Threads Pack of 100 #ad

Steel Machine Screw, Zinc Plated Finish, Flat Head, Phillips Drive, 2″ Length, #10-24 Threads (Pack of 100)

Steel Machine Screw, Zinc Plated Finish, Flat Head, Phillips Drive, 2″ Length, #10-24 Threads (Pack of 100) #ad - Flat head is cone shaped for use in countersunk holes and has a flat top that fits flush with the mated surface. Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion resistance and has a reflective appearance. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

410 Stainless Steel Self-Drilling Screw Plain Finish Wafer Head Phillips Drive 3 Drill Point 10-24 Thread Size 1-14 Length Pack of 25 #ad

410 Stainless Steel Self-Drilling Screw, Plain Finish, Wafer Head, Phillips Drive, #3 Drill Point, #10-24 Thread Size, 1-1/4″ Length (Pack of 25)

410 Stainless Steel Self-Drilling Screw, Plain Finish, Wafer Head, Phillips Drive, #3 Drill Point, #10-24 Thread Size, 1-1/4″ Length (Pack of 25) #ad - Plain surface has no finish or coating. 410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments. Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

Steel Pan Head Machine Screw Black Zinc Plated Meets ASME B1863 2 Phillips Drive 10-24 Thread Size 34 Length Fully Threaded Import Pack of 100 #ad

Steel Pan Head Machine Screw, Black Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 3/4″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 3/4″ Length, Fully Threaded, Import (Pack of 100) #ad - Stainless steel provides corrosion resistance. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Plain surface has no finish or coating. Pan head has a flat top and short vertical sides with a rounded top edge.

 

Nylon 66 Pan Head Machine Screw Black Slotted Drive 10-24 Thread Size 14 Length Fully Threaded USA Made Pack of 100 #ad

Nylon 6/6 Pan Head Machine Screw, Black, Slotted Drive, #10-24 Thread Size, 1/4″ Length, Fully Threaded, USA Made (Pack of 100)

Nylon 6/6 Pan Head Machine Screw, Black, Slotted Drive, #10-24 Thread Size, 1/4″ Length, Fully Threaded, USA Made (Pack of 100) #ad - Zinc plating resists corrosion and has a reflective appearance. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface. Steel is often used in applications where strength is the primary consideration.

 

18-8 Stainless Steel Thread Cutting Screw Plain Finish Pan Head Phillips Drive Type F 10-24 Thread Size 38 Length Pack of 50 #ad

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, Pan Head, Phillips Drive, Type F, #10-24 Thread Size, 3/8″ Length (Pack of 50)

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, Pan Head, Phillips Drive, Type F, #10-24 Thread Size, 3/8″ Length (Pack of 50) #ad - Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge. Plain surface has no finish or coating. 18-8 stainless steel provides good corrosion resistance and strength.

 

Steel Pan Head Machine Screw Black Zinc Plated Meets ASME B1863 T25 Star Drive 10-24 Thread Size 1 Length Fully Threaded Imported Pack of 50 #ad

Steel Pan Head Machine Screw, Black Zinc Plated, Meets ASME B18.6.3, T25 Star Drive, #10-24 Thread Size, 1″ Length, Fully Threaded, Imported (Pack of 50)

Steel Pan Head Machine Screw, Black Zinc Plated, Meets ASME B18.6.3, T25 Star Drive, #10-24 Thread Size, 1″ Length, Fully Threaded, Imported (Pack of 50) #ad - Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw.

 

410 Stainless Steel Thread Cutting Screw Plain Finish Pan Head Phillips Drive Type F 10-24 Thread Size 58 Length Pack of 25 #ad

410 Stainless Steel Thread Cutting Screw, Plain Finish, Pan Head, Phillips Drive, Type F, #10-24 Thread Size, 5/8″ Length (Pack of 25)

410 Stainless Steel Thread Cutting Screw, Plain Finish, Pan Head, Phillips Drive, Type F, #10-24 Thread Size, 5/8″ Length (Pack of 25) #ad - Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Pan head has a flat top and short vertical sides with a rounded top edge. 410 stainless steel has high strength and hardness, and resists corrosion in mild environments. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Plain surface has no finish or coating.

 

316 Stainless Steel Machine Screw Plain Finish Pan Head Phillips Drive 1 Length 10-24 Threads Pack of 25 #ad

316 Stainless Steel Machine Screw, Plain Finish, Pan Head, Phillips Drive, 1″ Length, #10-24 Threads (Pack of 25)

316 Stainless Steel Machine Screw, Plain Finish, Pan Head, Phillips Drive, 1″ Length, #10-24 Threads (Pack of 25) #ad - Pan head has a flat top and short vertical sides with a rounded top edge. 316 stainless steel provides strength and better corrosion resistance than 18-8 stainless steel. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Plain surface has no finish or coating.

 

Steel Truss Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 10-24 Thread Size 1 Length Fully Threaded Imported Pack of 100 #ad

Steel Truss Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 1″ Length, Fully Threaded, Imported (Pack of 100)

Steel Truss Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 1″ Length, Fully Threaded, Imported (Pack of 100) #ad - Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw.

 

Morris Products 18420 Bolt-On Bridle Ring 10-24 Thread Size 1 Diameter Size Pack of 50 #ad

Morris Products 18420 Bolt-On Bridle Ring, 10-24 Thread Size, 1″ Diameter Size (Pack of 50)

Morris Products 18420 Bolt-On Bridle Ring, 10-24 Thread Size, 1″ Diameter Size (Pack of 50) #ad - Zinc plated steel. Bridle rings, bolt-on, commonly used with beam clamps supports communications cable & other low voltage uses. Supports communications cable & other low voltage uses. Culus listed. Commonly used with beam clamps.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.