Coolest 25 Jacobs Drills in 2019

 

Jacobs Drill Chuck 38 #ad

Jacobs Drill Chuck 3/8 “

Jacobs Drill Chuck 3/8 “ #ad - Fits all popular 3/8 drills. Chuck key included. 3/8 x 24 thread. 3/8 chuck.

 

2 Morse Taper to 3 Jacobs Taper Drill Chuck Arbor #ad

2 Morse Taper to 3 Jacobs Taper Drill Chuck Arbor

2 Morse Taper to 3 Jacobs Taper Drill Chuck Arbor #ad - Determine both shank size (to fit into your drill press,tailstock, etc. ). For chucks with jacobs taper backs. Morse taper to jacobs taper arbors have a tang end (not available with a drawbar end. ) & Chuck (jacobs) taper to order the correct arbor.

 

JACOBS Drill Chuck Arbor - Shank Jacobs Taper JACOBS TAPER 5 Taper 5 MT #ad

JACOBS Drill Chuck Arbor – Shank: Jacobs Taper JACOBS TAPER: 5 Taper: 5 MT

JACOBS Drill Chuck Arbor – Shank: Jacobs Taper JACOBS TAPER: 5 Taper: 5 MT #ad - . Features hardened and precision ground.

 

Röhm 14987 Type 236 Taper Shank Arbor with Morse Taper 3 to Jacobs J33 Drill Chuck142mm Shank Diameter 129mm Length #ad

Röhm 14987 Type 236 Taper Shank Arbor with Morse Taper 3 to Jacobs J33 Drill Chuck,14.2mm Shank Diameter, 129mm Length

Röhm 14987 Type 236 Taper Shank Arbor with Morse Taper 3 to Jacobs J33 Drill Chuck,14.2mm Shank Diameter, 129mm Length #ad - Hole for alignment pin j33. Completely hardened and ground. Röhm type 236 taper shank arbor with jacobs drill chuck taper. 2-millimeters shank diameter. . 14. 129-millimeters length.

 

JACOBS Drill Chuck Arbor - Shank Jacobs Taper JACOBS TAPER 4 Taper 5 MT #ad

JACOBS Drill Chuck Arbor – Shank: Jacobs Taper JACOBS TAPER: 4 Taper: 5 MT

JACOBS Drill Chuck Arbor – Shank: Jacobs Taper JACOBS TAPER: 4 Taper: 5 MT #ad - Drill chuck arbor, shank jacobs taper jacobs taper 4 taper 5 mt.

 

Jacobs Drill Chuck 12 #ad

Jacobs Drill Chuck 1/2 “

Jacobs Drill Chuck 1/2 “ #ad - Returns will not be honored on this closeout item. Fits all popular 3/8 drills. 3/8 x 24 thread. 3/8 chuck.

 

5 High Speed Air Sander with Jacobs Drill Chuck #ad

5″ High Speed Air Sander with Jacobs Drill Chuck

5″ High Speed Air Sander with Jacobs Drill Chuck #ad - This sander does double duty. 18,000 rpm max. Remove the backing plate and install the rugged 3/8″ jacobs® chuck to use as a high speed drill. High polish lightweight aluminum housing sanding pad adapter rugged 3/8″ jacobs® chuck required pressure 90 psi air consumption 4 cfm 1/4″ npt air inlet comes with back plate, two wrenches and paper/fiber backing disc, 3″, 4″ and 5-1/2″ pads.

 

Röhm 14980 Type 236 Taper Shank Arbor with Morse Taper 2 to Jacobs J33 Drill Chuck 142mm Shank Diameter 1095mm Length #ad

Röhm 14980 Type 236 Taper Shank Arbor with Morse Taper 2 to Jacobs J33 Drill Chuck, 14.2mm Shank Diameter, 109.5mm Length

Röhm 14980 Type 236 Taper Shank Arbor with Morse Taper 2 to Jacobs J33 Drill Chuck, 14.2mm Shank Diameter, 109.5mm Length #ad - 5-millimeters length. Completely hardened and ground. Röhm type 236 taper shank arbor with jacobs drill chuck taper. 14. Hole for alignment pin j33. 2-millimeters shank diameter. 109.

 

Röhm 14978 Type 236 Taper Shank Arbor with Morse Taper 2 to Jacobs J3 Drill Chuck 19mm Shank Diameter 1155mm Length #ad

Röhm 14978 Type 236 Taper Shank Arbor with Morse Taper 2 to Jacobs J3 Drill Chuck, 19mm Shank Diameter, 115.5mm Length

Röhm 14978 Type 236 Taper Shank Arbor with Morse Taper 2 to Jacobs J3 Drill Chuck, 19mm Shank Diameter, 115.5mm Length #ad - Hole for alignment pin j3. 5-millimeters length. 115. 19-millimeters shank diameter. Röhm type 236 taper shank arbor with jacobs drill chuck taper. Completely hardened and ground.

 

Jacobs Drill Chuck 38 #ad

Jacobs Drill Chuck 3/8 “

Jacobs Drill Chuck 3/8 “ #ad - 3/8 x 24 thread. 3/8 chuck. Fits all popular 3/8 drills. Chuck key included.

 

Set of Two Jacobs Drill Chucks with MT3 Morse Taper 3 Arbor Keys 0 - 38 564 - 12 Capacity #ad

Set of Two Jacobs Drill Chucks with MT3 Morse Taper 3 Arbor & Keys 0 – 3/8″ & 5/64″ – 1/2″ Capacity

Set of Two Jacobs Drill Chucks with MT3 Morse Taper 3 Arbor & Keys 0 – 3/8″ & 5/64″ – 1/2″ Capacity #ad - 79 in, capacity max. Keyed drill chuck, medium duty, bearing type plain bearing, mounting type 3/8-24, key number k30, closed length 2. 500 in, capacity min. 375 in, capacity min. 43 in, capacity max. Keyed drill chuck, medium duty, bearing type plain bearing, mounting type 5/8-16, key number k32, closed length 3. 0. 0. 09 in, open length 2. 50 in, open length 2. 08 in, construction steel jacobs 41ba drill chuck with k30 key, mounted on an mt3 / morse taper #3 arbor. 04 in, construction steel. 43 in, chuck diameter 1. 0. 05 in, chuck diameter 1. Jacobs 33ba drill chuck with k32 key, mounted on an mt3 / morse taper #3 arbor. 0.

 

38 Jacobs Drill Chuck for Headstock #ad

3/8 Jacobs Drill Chuck for Headstock

3/8 Jacobs Drill Chuck for Headstock #ad - This jacobs chuck holds drills from 3/32″ up to 3/8″ in size. For end mills you should use either collets or an end mill holder. Included is a threaded arbor for the headstock(#1 morse) and chuck key. ) For use with sherline machine tools. It can be used in both the lathe and mill for holding drills, reamers, etc. (It is not intended to hold end mills.

 

Set of Two Jacobs Drill Chucks with 12 Straight Shanks Keys 0 - 38 564 - 12 Capacity #ad

Set of Two Jacobs Drill Chucks with 1/2″ Straight Shanks & Keys 0 – 3/8″ & 5/64″ – 1/2″ Capacity

Set of Two Jacobs Drill Chucks with 1/2″ Straight Shanks & Keys 0 – 3/8″ & 5/64″ – 1/2″ Capacity #ad - 50 in, open length 2. 0. 0. Keyed drill chuck, medium duty, bearing type plain bearing, mounting type 5/8-16, key number k32, closed length 3. 0. 08 in, construction steel jacobs 41ba drill chuck with k30 key, mounted on a 1/2″ straight shank threaded arbor. Jacobs 33ba drill chuck with k32 key, mounted on a 1/2″ straight shank threaded arbor. 43 in, chuck diameter 1. 79 in, capacity max. 09 in, open length 2. 43 in, capacity max. 500 in, capacity min. 0. 04 in, construction steel. 375 in, capacity min. Keyed drill chuck, medium duty, bearing type plain bearing, mounting type 3/8-24, key number k30, closed length 2. 05 in, chuck diameter 1.

 

Jacobs Chuck 30425D Archer Series 600 Morse Taper Drill Sleeve 5-12 Length #ad

Jacobs Chuck 30425D Archer Series 600 Morse Taper Drill Sleeve, 5-1/2″ Length

Jacobs Chuck 30425D Archer Series 600 Morse Taper Drill Sleeve, 5-1/2″ Length #ad - . Jacobs chuck series 600 morse taper drill sleeve. 5-1/2-inches overall length. Adapt smaller morse taper shank tools to larger machine spindles. Oil toughened and externally precision ground with hardened tang. Outside morse taper sizes is 4 and inside morse taper sizes is 3.

 

1069 - 38 Jacobs drill chuck for headstock and tailstock #ad

1069 – 3/8 Jacobs drill chuck for headstock and tailstock

1069 – 3/8 Jacobs drill chuck for headstock and tailstock #ad - This jacobs chuck holds drills from 3/32″ up to 3/8″ in size. (It is not intended to hold end mills. For end mills you should use either collets or an end mill holder. Included are threaded arbors for both the headstock (#1 morse) and the tailstock (#0 morse), a drawbolt and chuck key. ) For use with sherline machine tools. It can be used in both the lathe and mill for holding drills, reamers, etc.

 

Genuine Jacobs Drill Chuck 364 - 12 15 - 13 mm Capacity with MT1 Morse Taper 1 Arbor Key #ad

Genuine Jacobs Drill Chuck 3/64″ – 1/2″ 1.5 – 13 mm Capacity with MT1 Morse Taper 1 Arbor & Key

Genuine Jacobs Drill Chuck 3/64″ – 1/2″ 1.5 – 13 mm Capacity with MT1 Morse Taper 1 Arbor & Key #ad - Keyed drill chuck, mounting type 1/2-20. . Includes original jacobs key, may be thumb or t style, as available. Jacobs drill chuck with kk key, mounted on an mt1 / morse taper #1 arbor.

 

Set of Two Jacobs Drill Chucks with MT2 Morse Taper 2 Arbor Keys 0 - 38 564 - 12 Capacity #ad

Set of Two Jacobs Drill Chucks with MT2 Morse Taper 2 Arbor & Keys 0 – 3/8″ & 5/64″ – 1/2″ Capacity

Set of Two Jacobs Drill Chucks with MT2 Morse Taper 2 Arbor & Keys 0 – 3/8″ & 5/64″ – 1/2″ Capacity #ad - 0. 04 in, construction steel. 79 in, capacity max. 43 in, chuck diameter 1. 500 in, capacity min. 43 in, capacity max. 05 in, chuck diameter 1. 50 in, open length 2. 0. 375 in, capacity min. 0. 09 in, open length 2. Jacobs 33ba drill chuck with k32 key, mounted on an mt2 / morse taper #2 arbor. 0. Keyed drill chuck, medium duty, bearing type plain bearing, mounting type 3/8-24, key number k30, closed length 2. 08 in, construction steel jacobs 41ba drill chuck with k30 key, mounted on an mt2 / morse taper #2 arbor. Keyed drill chuck, medium duty, bearing type plain bearing, mounting type 5/8-16, key number k32, closed length 3.

 

Röhm 14977 Type 236 Taper Shank Arbor with Morse Taper 2 to Jacobs J2 Drill Chuck 124mm Shank Diameter 1065mm Length #ad

Röhm 14977 Type 236 Taper Shank Arbor with Morse Taper 2 to Jacobs J2 Drill Chuck, 12.4mm Shank Diameter, 106.5mm Length

Röhm 14977 Type 236 Taper Shank Arbor with Morse Taper 2 to Jacobs J2 Drill Chuck, 12.4mm Shank Diameter, 106.5mm Length #ad - Hole for alignment pin j2. 12. 4-millimeters shank diameter. 106. Röhm type 236 taper shank arbor with jacobs drill chuck taper. 5-millimeters length. Completely hardened and ground.

 

Hougen 58 Jacobs Drill Chuck 10738 #ad

Hougen 5/8″ Jacobs Drill Chuck (10738)

Hougen 5/8″ Jacobs Drill Chuck (10738) #ad - Precision machined and ground to master gages for maximum performance with jacobs drill and tap chucks. 1-1/32-inches minimum mount length, 1-3/64-inches maximum mount length. Chuck (jacobs) taper 33jt mount. Measures 5/8-inches maximum diameter by 5-21/64-inches maximum length and 9/16-inches minimum diameter by 5-5/16-inches minimum length. Bridgeport taper to jacobs taper arbor.

 

14 Jacobs drill chuck for tailstock #ad

1/4 Jacobs drill chuck for tailstock

1/4 Jacobs drill chuck for tailstock #ad - This jacobs chuck holds drills from 3/32″ up to 1/4″ in size. Included is a threaded arbor for the tailstock (#0 morse) and chuck key. (It is not intended to hold end mills. For end mills you should use either collets or an end mill holder. It can be used in both the lathe and mill for holding drills, reamers, etc. ) For use with sherline machine tools.

 

Genuine Jacobs Drill Chuck 364 - 12 15 - 13 mm Capacity with MT3 Morse Taper 3 Arbor Key #ad

Genuine Jacobs Drill Chuck 3/64″ – 1/2″ 1.5 – 13 mm Capacity with MT3 Morse Taper 3 Arbor & Key

Genuine Jacobs Drill Chuck 3/64″ – 1/2″ 1.5 – 13 mm Capacity with MT3 Morse Taper 3 Arbor & Key #ad - Keyed drill chuck, mounting type 1/2-20. Jacobs drill chuck with kk key, mounted on an mt3 / morse taper #3 arbor. Includes original jacobs key, may be thumb or t style, as available.

 

Heavy Duty Jacobs Drill Chuck 38 JT2 #ad

Heavy Duty Jacobs Drill Chuck 3/8″ JT2

Heavy Duty Jacobs Drill Chuck 3/8″ JT2 #ad - Includes threaded #0 morse arbor and chuck key. Made in usa. One year warranty. Heavy duty jacobs drill chuck 3/8″ jt2 condition new. Use in tailstock.

 

JACOBS Drill Chuck Arbor - Shank Jacobs Taper JACOBS TAPER 5 Taper 4 MT #ad

JACOBS Drill Chuck Arbor – Shank: Jacobs Taper JACOBS TAPER: 5 Taper: 4 MT

JACOBS Drill Chuck Arbor – Shank: Jacobs Taper JACOBS TAPER: 5 Taper: 4 MT #ad - Features hardened and precision ground. .

 

K2 Jacobs Drill Chuck Key #ad

K2 Jacobs Drill Chuck Key

K2 Jacobs Drill Chuck Key #ad - Price for each used on 2 series chuck key size k2 item chuck key pilot size (in) 1/4 jacobs equivalent 3649 country of origin (subject to change) china. One year warranty. Made in usa. Includes threaded #1 morse and #0 morse arbors, drawbolt, key. Use in either headstock or tailstock.

 

JACOBS Drill Chuck Arbor - Shank Jacobs Taper JACOBS TAPER 2 Taper 4 MT #ad

JACOBS Drill Chuck Arbor – Shank: Jacobs Taper JACOBS TAPER: 2 Taper: 4 MT

JACOBS Drill Chuck Arbor – Shank: Jacobs Taper JACOBS TAPER: 2 Taper: 4 MT #ad - . Features hardened and precision ground.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.