Coolest 25 Centering Chucks in 2020

 

65 mm- 3 Jaws Self Centering Chuck with Back Plate & T-nuts for Milling - A high quality 65mm 4 jaws self centering chuck with a mounting back plate & fixing tee nuts with screws. The chuck mounting is standard unimat thread m14 x 1 the back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. Overall height of this assembly is around 52- 53 mm. So you can decide accordingly considering you milling machine size when you think of buying it to mount on your existing rotary table. 65 mm 4 jaws self centering chuck with back plate & fixing- suitable to mount on 3″ (75 mm) & 4″ (100 mm) rotary table -3 as well as 4 slots tables both a very high quality low profile 75 mm (3 inches) rotary table with 4 slots supplied with a 3 jaw self centering 65 mm lathe chuck for milling machine. It is supplied with a mounting back plate, a set of t-nuts apart to ensure easy and quick mounting on the rotary table. . Designed to fit our 3 or 4″ rotary table with either 3 or 4 slots.

 

1076 – 3.1″ 4-Jaw Self-centering Chuck - Hardened steel reversible jaws. Includes two spindle bars for adjustment. Hold parts from 3/32 to 1-1/2 in regular position, to 2-3/4 with jaws reversed. Jaws scroll together when outer ring of chuck is turned for quick centering of material. 4 jaws hold round, square or tubular stock.

 

Bison 12″ Hard Top Jaw Self-Centering Chuck For Use With 4-Jaw Chuck - Bison 12″ dia 4″ center hole 3-jaw steel body plain back. Bison 8″ hard top jaw self-centering chuck for use with 4-jaw chuck. Bison 12″ hard top jaw self-centering chuck for use with 4-jaw chuck.

 

Sherline 1079- 2.5″ 4-Jaw Self-Centering Chuck - 1″ chuck, p/n 1076. The spindlethread is 3/4-16 to fit all sherline and similar spindles. This chuck will hold parts from 3/32″ in diameter up to 1-3/16″with jaws in the normal position and up to 2-1/4″ with the jawsreversed. Turning the knurled portion of the outer diameter of the chuckscrolls all four jaws in unison. (The stock must beaccurately shaped for all four jaws to grip. Centering accuracy on self-centering chucks is to within a fewthousandths of an inch. It willautomatically center square or round stock. For larger parts, see the 3. If perfect centering accuracy is required,see the section on 4-jaw independent jaw chucks. 1079, 14mm x 1mm thread 2. Included with the chuck are twotommy bars for tightening and loosening the chuck. 5″ 4-jaw self-centering chuckthis chuck combines the ease-of-use advantages of the 3-jawchuck with some of the advantages of a 4-jaw chuck. ) It will also gripthin-wall tubing in four places rather than three, which spreadsout the load and allows more grip without crushing the tubing.

 

Bison 6″ Dia. 1-1/2″ Center Hole 3-Jaw Steel Body Plain Back Self-Centering Chuck - Bison 16″ dia 5-3/8″ center hole 3-jaw semi-steel body plain back. Bison 6″ dia 1-1/2″ center hole 3-jaw steel body plain back. The minimum diameter required for clamping around the work piece is 1-1/4-inch and the minimum diameter required for expansion is 1-13/16-inch.

 

8″ 3-Jaw Plain Back Self-Centering Chuck - It uses universal scroll chucks and 2 sets of solid jaws. The 3 jaw plain back self-centering chuck has a chuck diameter of 8 inch and a through hole of 2. 559 inch. It is 3 jaw, plain back, and self centering.

 

Bison 4″ Dia. 5MT Spindle 3-Jaw Set-Tru Self-Centering Chuck With MT Shank Top Reversible Jaws - Bison 16″ hard top jaw self-centering chuck for use with 4-jaw chuck. Bison 12″ hard top jaw self-centering chuck for use with 4-jaw chuck. Bison 4″ dia 5mt spindle 3-jaw set-tru self-centering chuck with mt.

 

HHIP 3900-0426 4-Jaw Self-Centering Chuck Plain Back, 6″ - . 6″ 4-jaw self-centering chuck (plain back) made of high quality semi-steel. Universal scroll chucks. Chuck wrench included. 2 sets of solid jaws included (id &od).

 

Bison 16″ Dia. 5-3/8″ Center Hole 3-Jaw Semi-Steel Body Plain Back Self-Centering Chuck - The minimum diameter required for clamping around the work piece is 1-1/4-inch and the minimum diameter required for expansion is 1-13/16-inch. Includes t-handled wrenches wood screw point and machined chuck lever. Bison 16″ dia 5-3/8″ center hole 3-jaw semi-steel body plain back.

 

6″ 4-Jaw Plain Back Self-Centering Chuck - . 708 inch. 969-6. 165-5. This chuck is hardened and ground and highly polished. 77 inch, a clamping range of 0. 299 inch, and a clamping range of 2. 118-2. This 5 jaw plain back self centering chuck has a chuck diameter of 6 inch, a through hole of 1. 165 inch, a jamming range of 1.

 

Bison 20″ Dia. 7-1/2″ Center Hole 3-Jaw Semi-Steel Body Plain Back Self-Centering Chuck - The minimum diameter required for clamping around the work piece is 1-1/4-inch and the minimum diameter required for expansion is 1-13/16-inch. Bison 20″ dia 7-1/2″ center hole 3-jaw semi-steel body plain back. Bison 16″ dia 5-3/8″ center hole 3-jaw semi-steel body plain back.

 

Bison 4″ Dia. 3/4″ Center Hole 3-Jaw Semi-Steel Body Plain Back Self-Centering Chuck - Bison 4″ dia 3/4″ center hole 3-jaw semi-steel body plain back. Bison 12″ hard top jaw self-centering chuck for use with 4-jaw chuck. Bison 4″ dia 5mt spindle 3-jaw set-tru self-centering chuck with mt.

 

3-Jaw Self-Centering Chuck For Various Lathes Milling Machines External Grinding - Function this chuck is suitable for use on various lathes,milling machines,ordinary internal and external grinding machines etc,and for holding workpiece so as to aid the machines to acco mplish their cutting operation. Wash and clean the chuck regularly to preserve its accuracy and to avoid possible troubles parameter the product size 39″x39″x3″ (10x10x75cm) package size 63″x63″x63″ (16x16x16cm) net weight：25kg(55lb) gross weight：335kg(737lb) the chuck weight25kg(55lb). By means of a dial in dicator, check up the adaptor on the spindle nose before mounting the chuck onto it to make sure that it runs correctly do not hammer the workpiece gripped on the chuck so as to prevent possible impairment on the accuracy of the chuck or damage of its component parts chips might get into the chuck during cutting operation.

 

1040 – 3.1″ 3-Jaw Self-centering Chuck - Â¾-16 thread fits sherline spindles. Hardened steel reversible jaws. Includes two spindle bars for adjustment. Hold parts from 3/32 to 1-1/2 in regular position, to 2-3/4 with jaws reversed. Jaws scroll together when outer ring of chuck is turned for quick centering of material.

 

4″ 3-Jaw Plain Back Self-Centering Chuck - 866 inch. The 3 jaw plain back self-centering chuck has a chuck diameter of 4 inch and a through hole of 0. It uses universal scroll chucks and 2 sets of solid jaws. It is 3 jaw, plain back, and self centering.

 

Bison 20″ Hard Top Jaw Self-Centering Chuck For Use With 4-Jaw Chuck - Bison 8″ hard top jaw self-centering chuck for use with 4-jaw chuck. Bison 12″ dia 4″ center hole 3-jaw steel body plain back. Bison 20″ hard top jaw self-centering chuck for use with 4-jaw chuck.

 

Sherline 1076C-PIE – 3.1″ 4-jaw Self-Centering Chuck with Pie Jaws - In addition, because the face is bored to an exact and consistent depth, placing additional parts in the chuck for turning or milling means each part surface is held at exactly the same depth as the previous parts, saving setup time. Included with the chuck and jaws is a 1/4″ x 1″ steel dowel pin that is used to adjust the jaws during installation and to chuck up on while boring and turning the jaws.  . This increased gripping area allows for much less clamping pressure and less chance of deforming a gear or other delicate part held in the chuck. First developed by watch and clock makers, chucks with pie shaped jaws offer two main advantages. Note these jaws are designed to be used on our nickel/boron coated chuck p/n 1076c only. Boring the unhardened jaws to hold a particular diameter part means that instead of gripping the part at only three or four tiny contact points, they grip the part all the way around its diameter. Also included is a 1/8″ hex key for tightening the 5-40 x 3/8″ jaw mounting screws and two spindle or “tommy” bars for loosening and tightening the chuck.

 

Bison 5″ Hard Top Jaw Self-Centering Chuck For Use With 4-Jaw Chuck - Bison 12″ dia 4″ center hole 3-jaw steel body plain back. Bison 16″ dia 5-3/8″ center hole 3-jaw steel body plain back. Bison 5″ hard top jaw self-centering chuck for use with 4-jaw chuck.

 

65 mm- 4 Jaws Self Centering Chuck with Back Plate & T-nuts for Milling - It is supplied with a mounting back plate, a set of t-nuts apart to ensure easy and quick mounting on the rotary table. So you can decide accordingly considering you milling machine size when you think of buying it to mount on your existing rotary table. Overall height of this assembly is around 52- 53 mm. 65 mm 4 jaws self centering chuck with back plate & fixing- suitable to mount on 3″ (75 mm) & 4″ (100 mm) rotary table -3 as well as 4 slots tables both a very high quality low profile 75 mm (3 inches) rotary table with 4 slots supplied with a 3 jaw self centering 65 mm lathe chuck for milling machine. A high quality 65mm 4 jaws self centering chuck with a mounting back plate & fixing tee nuts with screws. Designed to fit our 3 or 4″ rotary table with either 3 or 4 slots. . The chuck mounting is standard unimat thread m14 x 1 the back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table.

 

4 INCH 4-JAW SELF-CENTERING CHUCK (PLAIN BACK) - Plain back | made of high grade tool steel. | 2 sets of solid jaws included (id &od). | Universal scroll chucks. | Chuck wrench included.

 

Bison 12″ Dia. 4″ Center Hole 3-Jaw Steel Body Plain Back Self-Centering Chuck - Bison 16″ dia 5-3/8″ center hole 3-jaw steel body plain back. Bison 10″ dia 3-1/8″ center hole 3-jaw steel body plain back. Bison 12″ dia 4″ center hole 3-jaw steel body plain back.

 

3/4 x 16 TPI Self-Centering 4-Jaw Chuck - You’ll appreciate the following features wide range of jaw movement, quick action and a powerful grip in either expansion or contraction modes. Everything is secure in a fitted plastic storage/carrying case. Jaws will expand and grip in a 2-3″ dovetailed recess in the base of your turning. Expand the versatility of your lathe and mount your workpieces quicker and easier with the self-centering 4-jaw chuck. Comes complete with screw center, locking levers, t-handled hex wrench for jaw screws and 8 extra jaw screws. Chuck body is chrome-plated to protect against corrosion while the jaws are anodized black. No disassembly or accessories are required to use the accompanying screw chuck, which has a 1-1/8″ long right hand thread. Simply rotate the chuck’s outer ring in the opposite direction to firmly hold round stock between 1-5/8″ and 2-3/4″ or square billets 1-1/8″ to 2-1/8″ in size.

 

Bison 10″ Dia. 3-1/8″ Center Hole 3-Jaw Semi-Steel Body Plain Back Self-Centering Chuck - Bison 10″ dia 3-1/8″ center hole 3-jaw semi-steel body plain back. Bison 3″ dia 5/8″ center hole 3-jaw semi-steel body plain back. Bison 12″ hard top jaw self-centering chuck for use with 4-jaw chuck.

 

1075 – 2.5″ 4-Jaw Self-centering Chuck - Hardened steel reversible jaws. Includes two spindle bars for adjustment. Jaws scroll together when outer ring of chuck is turned for quick centering of material. Hold parts from 3/32 to 1-3/16 in regular position, to 2-1/4 with jaws reversed. 4 jaws hold round, square or tubular stock.

 

Bison 8″ Hard Top Jaw Self-Centering Chuck For Use With 4-Jaw Chuck - Bison 8″ hard top jaw self-centering chuck for use with 4-jaw chuck. Bison 5″ hard top jaw self-centering chuck for use with 4-jaw chuck. Bison 12″ dia 4″ center hole 3-jaw steel body plain back.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.