9 Piece SAE Quick Change Magnetic Nutsetter Set
- The magnetic shafts hold fasteners securely to free up your hands in tight spaces. Set screws quickly and easily with the 9 piece magnetic quick release nutsetter set. The nutsetters each have a quick release hex shank and prominent laser-etched size identification for setting a variety of screws swiftly. •quick release hex shanks •magnetic shaft holds fasteners securely •laser etch markings for easy identification length 2″ each nutsetter sizes 1/2″, 15/32″, 7/16″, 13/32″, 3/8″, 11/32″, 5/16″, 9/32″ and 1/4″.
Irwin Tools 3051020 8 mm Magnetic Nutsetter, 47.6mm Length, 3 Pack
- Tool grade construction. 8 piece bagged stock. Magnetic for holding fasteners.
IRWIN Tools 1899935 Impact Performance Series Lobular Nutsetter Insert Bit, 1/2-Inch and 2-Inch Length
- Built for maximum durability and long life with impact drivers. Lobular design drives fastener on side instead of corner for less stripping and longer life. 1/4″ quick-change shank is designed to work with impact drivers, and reduces slipping in standard drill chucks. Rare earth magnets, with four times the hold of standard magnets, holds fasteners securely. Black oxide finish resists corrosion and increases life of bit.
DEWALT DW2235IR 5-Piece IMPACT READY Magnetic Nutsetter Set
- . 5 piece, magnetic impact ready nut setter set, patented geometry that reduces rounding of the hex, advanced hardening process provides maximum durability while the extra strength magnet provides superior bit retention, recessed corners for drives on flats that minimize shavings, industrial strength magnet maximizes fastener retention, while the pivoting product pivots up to 20 degrees allowing 1 to get into tight spaces or corners, includes 1/4″, 5/16″, 3/8″, 7/16″ & 1/2″ nut drivers.
6″ Long 5/16″ Nutsetter
- -1/4″ hex shank for use in drill chucks and quick change adapters. . -Standard 6″ length. -Powerful magnet provides positive retention or the screw improving installation rate.
DEWALT DWA2228IR 7/16-Inch IMPACT READY Cleanable Nutsetter
- Recessed corners that drives on flats which minimizes shavings. Product designed for use in impact drivers and wrenches. Industrial strength magnet maximizes fastener retention.
IRWIN Tools 1899938 Impact Performance Series Lobular Nutsetter Insert Bit, 1/2-Inch and 6-Inch Length
- Rare earth magnets, with four times the hold of standard magnets, holds fasteners securely. Black oxide finish resists corrosion and increases life of bit. 1/4″ quick-change shank is designed to work with impact drivers, and reduces slipping in standard drill chucks. Lobular design drives fastener on side instead of corner for less stripping and longer life. Built for maximum durability and long life with impact drivers.
Irwin Tools 3051021 10 mm Magnetic Nutsetter, 47.6mm Length, 3 Pack
- Magnetic for holding fasteners. 9 piece bagged stock. Tool grade construction.
Qualtool Premium MSHL1/4-5 Magnetic 1/4-Inch Hex Long Nutsetter, 5-Pack
- It has a 1/4 inch hex drive and is 2 9/16 inches long. All nutsetters are manufactured of industrial quality stainless steel and to exacting specifications resulting in the best possible products for user use. For driving hex head self-drilling fasteners and sheet metal screws. Qualtool premium mshl1/4-5 magnetic 1/4 inch hex long nutsetter 5 pack features a long power drive nutsetter.
12 ~ 2-9/16″ IMPACT LASER ETCHED MAGNETIC ~ 3/8″ ~ NUTSETTER NUT DRIVER SETTERS
- Lot of ~ 12 ~ impact magnetic nut setterlength 2-9/16 size 3/8 laser etched size markings for quick and easy identificatiexported by exportyourstore.
Qualtool Premium MSH5/16-10 Magnetic 5/16-Inch Hex Short Nutsetter, 10-Pack
- All nutsetters are manufactured of industrial quality stainless steel and to exacting specifications resulting in the best possible products for user use. Qualtool premium msh5/16-10 magnetic 5/16 inch hex short nutsetter 10 pack features a short power nutsetter. For driving hex head self-drilling fasteners and sheet metal screws. The drive size is 1/4 inch. It has a 5/16 inch broached hex and is 1 5/8 inches long.
IRWIN 1899937 Impact Performance Series Lobular Nutsetter Insert Bit, 1/2-Inch, 4-Inch
- 1/4″ quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Rare earth magnets, with four times the hold of standard magnets, holds fasteners securely. Black oxide finish resists corrosion and increases life of bit. Lobular design drives fastener on side instead of corner for less stripping and longer life. Built for maximum durability and long life with impact drivers.
Irwin Tools 3051014 5/16″ Magnetic Nutsetter, 2 9/16″ Length, 3 Pack
- This irwin 5/16-inch fractional magnetic nutsetter is designed for use with sheet metal screws and other hexagonal-head fasteners. A standard, 6-point design on the irwin nutsetter allows wide-ranging use.
12 ~ 2-9/16″ IMPACT LASER ETCHED MAGNETIC ~ 9/16″ ~ NUTSETTER NUT DRIVER SETTERS
- Lot of ~ 12 ~ impact magnetic nut setterlength 2-9/16 size 9/16 laser etched size markings for quick and easy identificatiexported by exportyourstore.
DEWALT DWPVTDRV3 3-Piece Impact-Ready Pivoting Nutsetters, 1/4-Inch, 3/8-Inch, 5/16-Inch
- Indrustrial strength magnet maximizes fastener retention. Extra-strength magnet for superior bit retention. Pivoting product pivots up to 20 degrees allowing one to get into tight spaces or corners. Product designed for use in impact drivers and wrenches. Recessed corners = drives on flats which minimzes shavings.
Quick Release Magnetic Nutsetter Set, 9 Piece SAE and 9 Piece Metric
- 1/4 inch shank, overall length 2″, laser etched markings. Sizes sae (1/4″, 9/32″, 5/16″, 11/32″, 3/8″, 13/32″, 7/16″, 15/32″ and 1/2″). Sizes metric (5 mm,55 mm,6 mm,7 mm,8 mm,9,10 mm,11 mm,12mm). Anti-rust, holder/organizer included. Sets come in compactly organized black “warrior” holder.
Master Mechanic 160379 10 Piece, Magnetic Nutsetter Set
- Master mechanic, 10 piece, magnetic nutsetter set, includes 3/16″, 1/4″, 9/32″, 5/16″, 11/32″, 3/8″, 7/16″, metric 6, 8 & 10 mm, magnetic tip holds drivers firmly in place. .
IRWIN Tools 1899939 Impact Performance Series Lobular Nutsetter Insert Bit, 1/2-Inch and 12-Inch Length
- Built for maximum durability and long life with impact drivers. Black oxide finish resists corrosion and increases life of bit. Rare earth magnets, with four times the hold of standard magnets, holds fasteners securely. 1/4″ quick-change shank is designed to work with impact drivers, and reduces slipping in standard drill chucks. Lobular design drives fastener on side instead of corner for less stripping and longer life.
IRWIN 1899942 Impact Performance Series Lobular Nutsetter Insert Bit, 1/2-Inch, 4-Inch, 5-Pack
- Rare earth magnets, with four times the hold of standard magnets, holds fasteners securely. Built for maximum durability and long life with impact drivers. Lobular design drives fastener on side instead of corner for less stripping and longer life. 1/4″ quick-change shank is designed to work with impact drivers and reduces slipping in standard drill chucks. Black oxide finish resists corrosion and increases life of bit.
Qualtool Premium MSHL5/16-6-5 Magnetic 5/16-Inch Hex Extra Long Nutsetter, 5-Pack
- Qualtool premium mshl5/16-6-5 magnetic 5/16 inch hex extra long nutsetter 5 pack features a extra long power drive nutsetter. It has a 1/4 inch hex drive and is 6 inches long. For driving hex head self-drilling fasteners and sheet metal screws. All nutsetters are manufactured of industrial quality stainless steel and to exacting specifications resulting in the best possible products for user use.
Irwin Tools 3051004 1/4″ Magnetic Nutsetter, 6″
- A standard, 6-point design utilized by these nutsetters allows wide-ranging use. 6″ overall length. 1/4″ hex drive and 1/4″ shank diameter. This nutsetter is designed for use with sheet metal screws and other hexagonal-head fasteners. 7/16″ socket body diameter.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
