Coolest 21 Band Saw Guides in 2019

 

Craftsman Old Style Bandsaw Guide Blocks #ad

Craftsman Old Style Bandsaw Guide Blocks

Craftsman Old Style Bandsaw Guide Blocks #ad - 5. Made of alumina-oxide ceramic with a hardness of 9. They create far less friction, run smoother, quieter and outlast every other guide block on the market. Four to a set and price is for four. Our customers tell us they increase blade life by 40% 3/8×3/8×3/4.

 

Delta 10 bandsaw Ceramic Guide Blocks Model 28-195 #ad

Delta 10″ bandsaw Ceramic Guide Blocks (Model 28-195)

Delta 10″ bandsaw Ceramic Guide Blocks (Model 28-195) #ad - They create far less friction, run smoother, quieter and outlast every other guide block on the market. Made of alumina-oxide ceramic with a hardness of 9. 5. Our customers tell us they increase blade life by 40%.

 

Hitachi 967684 Guide B for the Hitachi CB75F Band Saw #ad

Hitachi 967684 Guide B for the Hitachi CB75F Band Saw

Hitachi 967684 Guide B for the Hitachi CB75F Band Saw #ad - Designed for electronic sawing projects. Comes with a 30-day limited warranty. Well-built with a simple design. Compatible with the hitachi cb75f band saw. Quick setup is intuitive and easy to use.

 

Delta 14 Ceramic Bandsaw Guide Blocks #ad

Delta 14″ Ceramic Bandsaw Guide Blocks

Delta 14″ Ceramic Bandsaw Guide Blocks #ad - . Price is for the set of four. Made of alumina-oxide ceramic with a hardness of 9. Our customers tell us they increase blade life by 40% 1/2″x1/2″x3/4″ plus one paralellogram. They create far less friction, run smoother, quieter and outlast every other guide block on the market. 5.

 

Carter Products JET14 Band Saw Guide Set For 14-Inch Jet Band Saw by Carter #ad

Carter Products JET14 Band Saw Guide Set For 14-Inch Jet Band Saw by Carter

Carter Products JET14 Band Saw Guide Set For 14-Inch Jet Band Saw by Carter #ad - Critical component in maintaining blade alignmentrugged ball bearing designlubricated and sealed for lifebearings adjust forward and backward and side to sideblade friction is reduced to make a cooler blade and smooth cuts.

 

Delta 12 Bandsaw Ceramic Guide Blocks #ad

Delta 12″ Bandsaw Ceramic Guide Blocks

Delta 12″ Bandsaw Ceramic Guide Blocks #ad - Made of alumina-oxide ceramic with a hardness of 9. They create far less friction, run smoother, quieter and outlast every other guide block on the market. Our customers tell us they increase blade life by 40% 5/16″x5/16″x7/8″. 5. Price is for a set of four.

 

Inca 340 Band saw Guide Blocks 4-piece Set #ad

Inca 340 Band saw Guide Blocks (4-piece Set)

Inca 340 Band saw Guide Blocks (4-piece Set) #ad - They create far less friction, run smoother, quieter and outlast every other guide block on the market. Our customers tell us they increase blade life by 40%. Made of alumina-oxide ceramic with a hardness of 9. 5.

 

Dremel Band Saw Guide Block 8027 #ad

Dremel Band Saw Guide Block #8027

Dremel Band Saw Guide Block #8027 #ad - Wheel diameter 1575 x wheel thickness 0430. Bearing is 6200 capped by a machined and hardened outer race. Dremel band saw guide block #8027. Note sold individually, not as a pair. Shaft diameter 0496 x 1575 long.

 

Bandsaw Guide Jaw Set for Carter CP20 #ad

Bandsaw Guide Jaw Set for Carter CP20

Bandsaw Guide Jaw Set for Carter CP20 #ad - Set consists of (2) guide blocks (jaws) (2) screws (2) nuts. Will outlast others by up to 30%. Hardened tool steel for carter cp20 on sale. Sold by the set. 100% guaranteed.

 

Universal Band Saw Guide Bearings Set of 10 Bearings Only #ad

Universal Band Saw Guide Bearings (Set of 10 Bearings Only)

Universal Band Saw Guide Bearings (Set of 10 Bearings Only) #ad - 590″) this is the replacement. Larger saws use 10 while smaller saws use 6. Set of 10 bearings only, no other hardware included. Universal band saw guide bearings. These bearing are used universally in hand held band saws and smaller table top models of all brands. If the outside diameter on your bearings are 15mm (.

 

General 14 Bandsaw Guide Blocks #ad

General 14″ Bandsaw Guide Blocks

General 14″ Bandsaw Guide Blocks #ad - Our customers tell us they increase blade life by 40% 1/2 inch x 1/2 inch x. Made of alumina-oxide ceramic with a hardness of 9. 5. Price is for a set of four. 75 inch. They create far less friction, run smoother, quieter and outlast every other guide block on the market. .

 

Carter Products DEL14 Band Saw Guide Set For 14-Inch Delta Band Saw #ad

Carter Products DEL14 Band Saw Guide Set For 14-Inch Delta Band Saw

Carter Products DEL14 Band Saw Guide Set For 14-Inch Delta Band Saw #ad - Bearings adjust forward and backward and side-to-side. Blade friction is reduced to make a cooler blade and smoother cuts. Weighs 26 pounds shipped. Band saw guide set for use with 14-inch delta band saws to help maintain blade alignment. Rugged ball bearing design lubricated and sealed for life.

 

New ACCURA 14 ball bearing guide set for band saws #ad

New ACCURA 14″ ball bearing guide set for band saws

New ACCURA 14″ ball bearing guide set for band saws #ad - Good for up to a 5/8″ blade width. They allow for easier tracking of narrow blades and adjust to the blade on a cam. This allows the bearings to roll on the blade, giving extra support. This set of upper and lower guides replace the standard cool block style fork holders on most 14″ band saws.

 

Carter Products DEL14 Band Saw Guide Set For 14-Inch Delta Band Saw by Carter #ad

Carter Products DEL14 Band Saw Guide Set For 14-Inch Delta Band Saw by Carter

Carter Products DEL14 Band Saw Guide Set For 14-Inch Delta Band Saw by Carter #ad - 6 pounds shipped. Band saw guide set for use with 14-inch delta band saws to help maintain blade alignmentblade friction is reduced to make a cooler blade and smoother cutsrugged ball bearing design lubricated and sealed for lifebearings adjust forward and backward and side-to-sideweighs 2.

 

JET 708749 JWBS-16 16-Inch 1-12-Horsepower Woodworking Bandsaw with Guide Blocks 115-Volt 1-Phase #ad

JET 708749 JWBS-16 16-Inch 1-1/2-Horsepower Woodworking Bandsaw with Guide Blocks, 115-Volt 1-Phase

JET 708749 JWBS-16 16-Inch 1-1/2-Horsepower Woodworking Bandsaw with Guide Blocks, 115-Volt 1-Phase #ad - 1-piece dual-tapered column design for greater rigidity and strength. 17-by 17-inch cast-iron table weighs 310 pounds shipped 1-year limited warranty. Convenient block guides offer support and reduce friction. Precision computer balanced wheels rack-and-pinion blade guide height adjustment. 16-inch band saw with a powerful 1-1/2 hp tefc 115-volt motor.

 

Carter Products JET14 Band Saw Guide Set For 14-Inch Jet Band Saw #ad

Carter Products JET14 Band Saw Guide Set For 14-Inch Jet Band Saw

Carter Products JET14 Band Saw Guide Set For 14-Inch Jet Band Saw #ad - . This provides your saw with reduced blade friction, improved cutting accuracy, and is adjustable for blade widths from 1/8″ to 1″. Fits round guide support shafts only. The carter products jet 14″ conversion kit updates your saw’s performance through the use of model 2300 all sealed ball bearing roller guides.

 

Carter Products SEA3 Band Saw Guide Fits Sears 12 inch band saws with verticle attaching bolt #ad

Carter Products SEA3 Band Saw Guide (Fits Sears 12 inch band saws with verticle attaching bolt)

Carter Products SEA3 Band Saw Guide (Fits Sears 12 inch band saws with verticle attaching bolt) #ad - When using stabilizer, it’s the only guide you use. Remove upper side guides & install stabilizer in place. Back up upper thrust bearing. Open lower guides wide & back up lower thrust bearing. Back of blade rides in groove in bearing wheel. One piece item.

 

Delta 16 Bandsaw Ceramic Guide Blocks #ad

Delta 16″ Bandsaw Ceramic Guide Blocks

Delta 16″ Bandsaw Ceramic Guide Blocks #ad - They create far less friction, run smoother, quieter and outlast every other guide block on the market. Our customers tell us they increase blade life by 40% price is for a set of four, 5/16″x5/16″x7/8″. Made of alumina-oxide ceramic with a hardness of 9. 5.

 

Walker Turner Bandsaw Guide Wheel #ad

Walker Turner Bandsaw Guide Wheel

Walker Turner Bandsaw Guide Wheel #ad - Note sold individually, not as a pair. Wheel diameter 1575 x wheel thickness 0430. Shaft diameter 0496 x 1575 long. Bearing is 6200 capped by a machined and hardened outer race. 90 degree groove on shaft.

 

Jet 14 Import 14 Band Saw Guide Blocks 4-piece Set #ad

Jet 14″ & Import 14″ Band Saw Guide Blocks (4-piece Set)

Jet 14″ & Import 14″ Band Saw Guide Blocks (4-piece Set) #ad - They create far less friction, run smoother, quieter and outlast every other guide block on the market. Our customers tell us they increase blade life by 40% 1/2 x 1/2 x 3/4. 5. Price is for a set of 4. Made of alumina-oxide ceramic with a hardness of 9.

 

DeltaRockwell Bandsaw 20 Guide Blocks #ad

Delta/Rockwell Bandsaw 20″ Guide Blocks

Delta/Rockwell Bandsaw 20″ Guide Blocks #ad - Made of alumina-oxide ceramic with a hardness of 9. 5. Our customers tell us they increase blade life by 40% 5/8 inch x 5/8 inch x 1 inch plus one paralellogram. They create far less friction, run smoother, quieter and outlast every other guide block on the market. Price is for a set of four.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.