Dormer E513 High-Speed Steel Straight Flute Tap, Uncoated (Bright) Finish, Round Shank With Square End, Plug Chamfer, M8-0.75 Thread Size
- High-speed steel for compatibility with a variety of materials. Hand threading tap with straight flutes cuts threads in through holes and blind holes. Round shank with square end allows tap to be used in hand or power-driven applications. Uncoated (bright) tools have no additional surface treatment or coating, suitable for general-purpose applications. Available in metric coarse (m) or metric fine (mf) right-hand thread options for different applications.
YG-1 B0 Series Premium HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Modified Bottoming Chamfer, 3/8″-16 Thread Size, H3 Tolerance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. 0551-inches thread length. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Walton Replacement Finger for 4 Flute Tap Extractor, 5/16″ Size
- Replacement finger for walton 4 flute, tap extractors. Fingers give you the ability to replace a worn out part without having to purchase an entire new tap extractor. Made of hardened steel to help prevent the damage of the workpieces threads. For removing machine screws and broken hand taps.
Walton 10254 1/4″, 4 Flute Tap Extractor With Square Shank
- Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Threads per inch need not be specified as tap extractors will fit both nc and nf taps. For removing machine screws and broken hand taps. When fingers become bent or broken or are too short for further use, replacement fingers are available.
Walton Tools (WLT10314) 5/16″ (8MM) 4-FLUTE TAP EXTRACTOR
- Image depicts tap extractor parts holder, collar, sleeve and fingers . Tap extractors will fit both nc and nf taps. Remove broken taps without drilling, lasers, damaged threads, scrapped parts or repair.
Dormer E500 High-Speed Steel Straight Flute Tap, Uncoated (Bright) Finish, Round Shank With Square End, Taper Chamfer, M2-0.40 Thread Size
- Hand threading tap with straight flutes cuts threads in through holes and blind holes. Round shank with square end allows tap to be used in hand or power-driven applications. Available in metric coarse (m) or metric fine (mf) right-hand thread options for different applications. High-speed steel for compatibility with a variety of materials. Uncoated (bright) tools have no additional surface treatment or coating, suitable for general-purpose applications.
YG-1 D2 Series Vanadium Alloy HSS Spiral Flute Tap, Hardslick Coated, Round Shank with Square End, Modified Bottoming Chamfer, 1/4″-20 Thread Size, H3 Tolerance
- Round shanks allow use with a wide variety of toolholding systems. 0433-inches thread length. Hardslick coated. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
YG-1 C0 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Modified Bottoming Chamfer, #8-32 Thread Size, H3 Tolerance
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. 0276-inches thread length. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Walton 18001-3 6 Piece 3 Flute Tap Extractor Set With Square Shank
- Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. 6 piece set contains sizes 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″. Packed in 6-compartment plastic case. For removing machine screws and broken hand taps.
Walton 18013 13 Piece Multi Flute Tap Extractor Set With Square Shank
- Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Packed in 15-compartment plastic case. 13 piece set contains sizes #4 (3-flute), #5 (3-flute), #6 (3-flute), #8, #10, #12, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 5/8″, 3/4″. For removing machine screws and broken hand taps.
YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 1/4″-28 Thread Size, H3 Tolerance
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 0625-inches thread length. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems.
SHEARTAP 34619 Oversize Spiral Flute Tap, High-Speed Steel, Steam Oxide over Nitride Finish, Semi-Bottoming Style Type, H11 Pitch Diameter, 3 Flutes, 1/2″-20″ Size
- . Sheartap offers exceptional value for high volume production tapping in carbon steels, and stainless steels up to 35 rc hardness. Steam oxide over nitride resists chip welding, increases lubricity and helps to retain cutting fluid.
Walton 18003 6-Piece 4 Flute Tap Extractor Set With Square Shank
- For removing machine screws and broken hand taps. 5 piece set contains sizes 5/16″, 3/8″, 7/16″, 1/2″, 5/8″. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Packed in 6-compartment plastic case.
HHIP 1011-7755 M5-.8 D4 Tin 35 Degree Metric Spiral Flute Tap, Din371
- Metric din 371 ground from solid. Size m5-08 limit d4. 35 degrees spiral flute thread ground. High speed steel titanium coated.
Union Butterfield 1587(UNC) High-Speed Steel Spiral Flute Tap, High-Helix, Uncoated (Bright) Finish, Round Shank With Square End, Plug Chamfer, #6-32 Thread Size
- Spiral flutes for creating threads in blind holes. Available in unc (unified coarse) or unf (unified fine) right-hand thread options for different applications. Higher helix angle improves chip removal. Spiral flute tap design pulls chips back from the tip of the tool and out of the hole to prevent clogging. Round shank with square end helps to minimize rotation in the tool holder.
Dormer E052 Powdered Metal Spiral Flute Threading Tap, For Aluminum, Gold Oxide Finish, Round Shank With Square End, Modified Bottoming Chamfer, M12-1.75 Thread Size
- Powdered-metal steel for performance approaching that of solid carbide tools, with the toughness and shock-resistance of high-speed steel. Gold oxide finish reduces grinding stress within the tool. Modified bottoming chamfer has additional length to reduce chip load, add tool life, and permit higher tapping speeds. Spiral flute tap pulls chips back from the tip of the tool and out of the hole to prevent clogging. Spiral flutes for creating threads in blind holes.
Walton 18002 6 Piece 4 Flute Tap Extractor Set With Square Shank
- 6 piece set contains sizes 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 5/8″. For removing machine screws and broken hand taps. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure. Packed in 6-compartment plastic case.
Walton 18001-2 6 Piece 2 Flute Tap Extractor Set With Square Shank
- For removing machine screws and broken hand taps. Packed in 6-compartment plastic case. Hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. 6 piece set contains sizes 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″. Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
INHDBOX 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set
- Spiral groove is conducive to remove crumbs, not easily broken tap. Sticky materials processing. High hardness, fast cutting, wear high temperature. Spiral tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and. 100% brand new and high quantity.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
