Coolest 19 Diamond Grit Hole Saws in 2020

 

Starrett KD0338-N 338-Inch Diamond Grit Holesaw #ad

Starrett KD0338-N 3.3/8-Inch Diamond Grit Holesaw

Starrett KD0338-N 3.3/8-Inch Diamond Grit Holesaw #ad - Clean effective cuts and extended life. Uniform synthetic diamond grit bonded over a durable steel platform. Recommended cutting speed is from 150 to 300-rpm. Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials. Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface.

 

Lenox Tools 121096DGDS Diamond Grit Hole Saw DS-6DG 38-Inch or 95mm #ad

Lenox Tools 121096DGDS Diamond Grit Hole Saw D/S-6DG, 3/8-Inch or 9.5mm

Lenox Tools 121096DGDS Diamond Grit Hole Saw D/S-6DG, 3/8-Inch or 9.5mm #ad - Each lenox hole saw has a continuous, brazed edge that lasts longer in tile and stone. An over-sized slot in the lenox diamond hole saw allows for easy plug removal. The diamond-tip hole saw uses a low-torque design that requires little pressure for fast cutting. 90-day limited warranty. 3/8-inch diameter.

 

No Arbor 1-12 Diamond Grit Holesaw #ad

(No Arbor) 1-1/2″ Diamond Grit Holesaw

(No Arbor) 1-1/2″ Diamond Grit Holesaw #ad - Quick start tip. Retractable centering pin. Quick change shank. Diameter 1-1/2″ depth of cut 1-1/2″ uses a standard arbor or snap-back arbors for use on slate, granite, marble, tile, glass and more fast, easy cutting low torque, little pressure required round holes makes removing plugs faster and easier.

 

IVY Classic 37809 Diamond Plus 1-Inch Wet and Dry Cutting Diamond Grit Hole Saw 1Card #ad

IVY Classic 37809 Diamond Plus 1-Inch Wet and Dry Cutting Diamond Grit Hole Saw, 1/Card

IVY Classic 37809 Diamond Plus 1-Inch Wet and Dry Cutting Diamond Grit Hole Saw, 1/Card #ad - For wet and dry cutting, use with low rpm and minimal pressure for cool cutting lubricate with water for extended life. Designed to drill holes in porcelain, hard tile, quarry tile, granite tile and glass, rotary drilling only, diamond plus (registered trademark). Diameter 1-inch, overall length 2-3/16-inch, 3/8-inch hex shank. Slot in hole saw provides easy plug removal. Vacuum-brazed diamond grit ensures long life.

 

M K Morse  DGM08C Diamond Grit Hole Saw with Attached Arbor 12-Inch #ad

M. K. Morse DGM08C Diamond Grit Hole Saw with Attached Arbor, 1/2-Inch

M. K. Morse DGM08C Diamond Grit Hole Saw with Attached Arbor, 1/2-Inch #ad - K. M. These hole saws provide longer life and faster cutting in hard to cut materials than conventional carbide grit or carbide tipped hole saws. Morse diamond grit hole saws are the ones home owners and contractors want to make their lives easier. They are great for cutting natural stone, porcelain, or masonry products, just to name a few.

 

rianiq07 Diamond Grit Holesaw No Arbor 78 #ad

rianiq07 Diamond Grit Holesaw (No Arbor) 7/8″

rianiq07 Diamond Grit Holesaw (No Arbor) 7/8″ #ad - Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws. 7/8″ diamond grit holesaw (no arbor) diameter 7/8″ depth of cut 1-1/2″ uses a standard arbor or snap-back arbors for use on slate, granite, marble, tile, glass and more fast, easy cutting low torque, little pressure required round holes makes removing plugs faster and easier. Nickel plating on these bits maximizes your tool’s life with great resistance to corrosion. Perfect set for cutting accurate holes in a wide variety of materials such as glass and ceramics. Side holes allow for easy slug removal after drilling.

 

LENOX Tools Hole Saw Diamond Grit 14-Inch or 64mm 121074DGDS #ad

LENOX Tools Hole Saw, Diamond Grit, 1/4-Inch or 6.4mm (121074DGDS)

LENOX Tools Hole Saw, Diamond Grit, 1/4-Inch or 6.4mm (121074DGDS) #ad - 90-day limited warranty. Each lenox hole saw has a continuous, brazed edge that lasts longer in tile and stone. An over-sized slot in the lenox diamond hole saw allows for easy plug removal. The diamond-tip hole saw uses a low-torque design that requires little pressure for fast cutting. 1/4-inch diameter.

 

Starrett KD0112-N 112-Inch Diamond Grit Holesaw #ad

Starrett KD0112-N 1.1/2-Inch Diamond Grit Holesaw

Starrett KD0112-N 1.1/2-Inch Diamond Grit Holesaw #ad - Uniform synthetic diamond grit bonded over a durable steel platform. Clean effective cuts and extended life. Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface. Recommended cutting speed is from 150 to 300-rpm. Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials.

 

Lenox Tools 1211314DGHS Diamond Grit Hole Saw-14DG 78-Inch or 222mm #ad

Lenox Tools 1211314DGHS Diamond Grit Hole Saw-14DG, 7/8-Inch or 22.2mm

Lenox Tools 1211314DGHS Diamond Grit Hole Saw-14DG, 7/8-Inch or 22.2mm #ad - Uniform synthetic diamond grit bonded over a durable steel platform. Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface. Clean effective cuts and extended life. Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials. High quality product.

 

Exchange-a-Blade 2055004 Stay Sharp 1-Inch 24mm Diamond Grit Hole Saw #ad

Exchange-a-Blade 2055004 Stay Sharp 1-Inch (24mm) Diamond Grit Hole Saw

Exchange-a-Blade 2055004 Stay Sharp 1-Inch (24mm) Diamond Grit Hole Saw #ad - Measures 1 inches diameter. Drill clean, accurate holes in ceramic, marble, glass, fiberglass and hardier-plank. For use with handheld or press drills. Includes drilling template wet cutting only. High grade diamonds ensure long life.

 

LDEXIN 2pcs 22mm  086inchDry Diamond Grit Hole Saw Drill Bit for Quartz Drilling Brazed Hole Saw Cutter Gloden Tone 22mm086 #ad

LDEXIN 2pcs 22mm / 0.86inchDry Diamond Grit Hole Saw Drill Bit for Quartz Drilling Brazed Hole Saw Cutter Gloden Tone (22mm/0.86″)

LDEXIN 2pcs 22mm / 0.86inchDry Diamond Grit Hole Saw Drill Bit for Quartz Drilling Brazed Hole Saw Cutter Gloden Tone (22mm/0.86″) #ad - &#X1f4ab【better use advice】dry use,also can be used with water which will help to increase the performance45 degree angle drill positioning before using, and then drilled vertically the rotation speed is about 800~4000 rpm. &#x1f4ab【sharp and smooth cut】coated with high quality diamond, the diamond hole saw creates a high precision, smooth cut,less chipping and minimizing any breakage. &#X1f4ab【drill speed】reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably. &#X1f4ab【super material 】these diamond drill bits made of vacuum brazed diamond,that is durable and have a long sevice life,which are high quality and good performance that excellent for making clean and accurate hole. &#X1f4ab【ideal application】this diamond coated core drill bit removes a complete circle from glass, marble, tiles,granite, ceramic or otherthey are perfect for drill glass, tile bottles,blocks jars, fiberglass porcelain tile ceramic, slate mable, granite light stone.

 

Diamond Grit Holesaw 1 Piece wArbor 58 #ad

Diamond Grit Holesaw (1 Piece w/Arbor) 5/8″

Diamond Grit Holesaw (1 Piece w/Arbor) 5/8″ #ad - Measures 1/4 inches diameter. 5/8″ diamond grit holesaw (1 piece w/ arbor) diameter 5/8″ shank 3/8″ one piece design for use on slate, granite, marble, tile, glass and more fast, easy cutting low torque, little pressure required oversized slots make for easier plug removal. Includes drilling template wet cutting only. Drill clean, accurate holes in ceramic, marble, glass, fiberglass and hardier-plank. High grade diamonds ensure long life.

 

uxcell 100mm Diamond Grit Hole Saw Drill Bit for Glass Ceramics Porcelain Ceramic Tile #ad

uxcell 100mm Diamond Grit Hole Saw Drill Bit for Glass Ceramics Porcelain Ceramic Tile

uxcell 100mm Diamond Grit Hole Saw Drill Bit for Glass Ceramics Porcelain Ceramic Tile #ad - Side holes allow for easy slug removal after drilling. 100mm diamond hole saw / core drill style bit. Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws. Perfect for cutting accurate holes in a wide variety of materials such as glass and ceramics. Nickel plating on diamond drill bit maximizes your tool’s life with great resistance to corrosion.

 

Starrett KD0412-N 412-Inch Diamond Grit Holesaw #ad

Starrett KD0412-N 4.1/2-Inch Diamond Grit Holesaw

Starrett KD0412-N 4.1/2-Inch Diamond Grit Holesaw #ad - Uniform synthetic diamond grit bonded over a durable steel platform. Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface. Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials. Recommended cutting speed is from 150 to 300-rpm. Clean effective cuts and extended life.

 

1 Piece with Arbor - 12 Diamond Grit Holesaw #ad

(1 Piece with Arbor) – 1/2″ Diamond Grit Holesaw

(1 Piece with Arbor) – 1/2″ Diamond Grit Holesaw #ad - Diameter 1/2″. One piece design. For use on slate, granite, marble, tile, glass and more. Shank 3/8″.

 

uxcell 35mm Dia Diamond Grit Hole Saw Drill Bit for Tile Glass #ad

uxcell 35mm Dia Diamond Grit Hole Saw Drill Bit for Tile Glass

uxcell 35mm Dia Diamond Grit Hole Saw Drill Bit for Tile Glass #ad - Descriptiondesigned for drilling 48mm diameter holes. Excellent for making clean and accurate hole on glass, tile, marble and other fragile materials. Nickel-plated hole saw drill bit with a diamond dust coating offers superior performance and cutting strength. Always use lubrication (water), otherwise the diamond coated drill bit will burn. Start your hole diagonally, make a round trace and then hold drill straight. Works better with an electric drill (excluding in this item). Cut clean and round holes to a depth of approximately 30mm.

 

Starrett KD0334-N 334-Inch Diamond Grit Holesaw #ad

Starrett KD0334-N 3.3/4-Inch Diamond Grit Holesaw

Starrett KD0334-N 3.3/4-Inch Diamond Grit Holesaw #ad - Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials. Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface. Clean effective cuts and extended life. Recommended cutting speed is from 150 to 300-rpm. Uniform synthetic diamond grit bonded over a durable steel platform.

 

Lenox Tools 1211824DGHS 24 Diamond Grit Hole Saw 1-12-Inch or 381mm #ad

Lenox Tools 1211824DGHS 24 Diamond Grit Hole Saw, 1-1/2-Inch or 38.1mm

Lenox Tools 1211824DGHS 24 Diamond Grit Hole Saw, 1-1/2-Inch or 38.1mm #ad - Lenox diamond hole saw has a brazed diamond edge for more holes in tile and stone. Diamond-tipped hole saw cuts holes in less time than carbide-grit or carbide-tipped hole saws. Round holes make removing plugs faster and easier. Diamond-tip hole saw has a durable, robust design for greater versatility in tough applications. Uses a 2l, 3l, 6l or 7l standard arbor or a 2l or 6l snap-back arbor.

 

Starrett KD0238-N 238-Inch Diamond Grit Holesaw #ad

Starrett KD0238-N 2.3/8-Inch Diamond Grit Holesaw

Starrett KD0238-N 2.3/8-Inch Diamond Grit Holesaw #ad - Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials. Recommended cutting speed is from 150 to 300-rpm. Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface. Clean effective cuts and extended life. Uniform synthetic diamond grit bonded over a durable steel platform.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.