Lenox Tools 2991818CG Master-Grit Carbide Grit Hole Saw, 1-1/8-Inch or 29mm
- 1-1/8-inch diameter. 1-inch pipe tap. Use the hole saw with a 1l or 4l standard arbor. Hole saw has a clean-cutting carbide grit edge that won’t snag or chip when cutting thin materials. Carbide grit hole saw cuts through a wide range of abrasive materials.
eBoot Diamond Drill Bit Coated Grit Hole Saw Set for Tile Granite Glass, 3/ 8 to 1 Inch, 5 Pieces
- Warm notice please add lubricants or water frequently to avoid sparks while using these coated grit hole saw set, can also enhance the working life by doing this. Multiple uses hole saw set can be applied on porcelain, glass, tile, ceramics, stone, granite and other hard surfaces, for most common standard electric drillers. Diamond drill sizes diamond drill set includes 5 diameter of 3/ 8, 1/ 2, 5/ 8, 3/ 4, 1 inch, 5 cm and 55 cm in length, good quality diamond drilling tool set. Clean and accurate hole can drill a complete clean and accurate hole from hard surface, no broken edges and no tremor phenomenon, long service life, durable. Steel and nickel coated material these drill coated hole saws are made from steel and nickel coated material, the drill head is covered by diamond particles, sturdy.
Starrett KD0400-N 4-Inch Diamond Grit Holesaw
- Clean effective cuts and extended life. Uniform synthetic diamond grit bonded over a durable steel platform. Recommended cutting speed is from 150 to 300-rpm. Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials. Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface.
Bosch HDG4 4″ 102mm Diamond Grit Hole Saw
- Longer life than competitive products. These products are part of the patented quick change universal hole saw system. Features vacuum brazing technology for faster cutting.
Starrett KD0114-N 1.1/4-Inch Diamond Grit Holesaw
- Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface. Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials. Uniform synthetic diamond grit bonded over a durable steel platform. Clean effective cuts and extended life. Recommended cutting speed is from 150 to 300-rpm.
Neiko 00823A 5-Piece Diamond Grit Hole Saw Set | 5/32″ to 1/2″
- 1/4-inch shank size, saw sizes 5/32, 1/4, 5/16, 3/8 and 1/2-inch. Heavy duty hole saws plated with nickel with diamond coating gives superior performance on ceramic tile and similar material. Neiko 5-piece 5/32 to 1/2-inch diamond dust hole saw set.
Starrett KD0300-N 3-Inch Diamond Grit Holesaw
- Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials. Uniform synthetic diamond grit bonded over a durable steel platform. Clean effective cuts and extended life. Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface. Recommended cutting speed is from 150 to 300-rpm.
Lenox Tools 2996464CG Master-Grit Carbide Grit Hole Saw, 4-Inch or 102mm
- Heat resistant carbide teeth for long life in tile and stainless steel. Use the hole saw with a 2l or 7l standard arbor or a 2l snap-back arbor. Hole saw has a clean-cutting carbide grit edge that won’t snag or chip when cutting thin materials. 4-inch diameter. Carbide grit hole saw cuts through a wide range of abrasive materials.
Starrett KD0600-N 6-Inch Diamond Grit Holesaw
- Recommended cutting speed is from 150 to 300-rpm. Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface. Uniform synthetic diamond grit bonded over a durable steel platform. Clean effective cuts and extended life. Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials.
Hitachi 728792C 2-1/2-Inch Carbide Grit for Hole Saw
- 2-inch carbide grit. Bites through tough materials. Made of durable carbide. Retains its form after repeated use. Comes with a 30-day limited warranty.
MK Morse ATCG100 14 Piece Tungsten Carbide Grit Hole Saw Kit
- Carbide kits have a carbide-tipped or carbide grit cutting edge with a hardened steel backer. Dia. With carbide-tipped pilot drills hole saw kitsbimetal kits have m3 high speed steel cutting edge with a hardened steel backer. Ext. , (3) arbors, (1) 12 in. Hole saw maintenance kit, carbide grit , carbide grit cutting edge with a hardened steel backer, number of pieces 13, use arbor 4xj18, 4xj22, 4xj24, cuts wood, plastic, or any machinable metal, includes hole saws 3/4, 7/8, 1-1/8, 1-3/8, 1-1/2, 1-3/4, 2, 2-1/4, 2-1/2 in.
Bosch HDG334 3-3/4″ 95mm Diamond Grit Hole Saw
- T-shank design for maximum grip and stability which fits 90% of all current jigsaw makes and models. Bosch all-purpose progressor blades offer fast, clean cuts through wood with nails, metals, particle board, and other materials. Patented progressive tooth design produces fast cuts and long life in thick and thin materials. .
Bosch HDG34 3/4″ 20mm Diamond Grit Hole Saw
- Intergral quick change adaptor- change holesaw sizes and types in seconds and remove material plugs easily. Segmented teeth, reduces debris and heat build-up. Fast and easy starts, even in the hardest tile. Vacuum brazed diamond grit, faster cutting and longer life.
Bosch HDG418 4-1/8″ 105mm Diamond Grit Hole Saw
- These products are part of the patented quick change universal hole saw system. Longer life than competitive products. Features vacuum brazing technology for faster cutting.
eBoot Diamond Drill Bit Coated Grit Hole Saw Set for Tile Granite Glass, 5/ 32 to 1/ 2 Inch, 5 Pieces
- Wide application hole saw set can be applied on wood, porcelain, glass, tile, ceramics, stone, masonry, granite and other hard surfaces, for most common electric drillers. 5 diamond drill sizes these diamond drill set includes 5 diameter of 5/ 32, 1/ 4, 5/ 16, 3/ 8, 1/ 2 inch, 5 cm in length, good quality diamond drilling tool set. Accurate and durable can drill a complete clean and accurate hole from hard surface, no broken edges and no tremor phenomenon, long service life, durable. Warm notice please add lubricants or water frequently to avoid sparks while using these coated grit hole saw set, can also enhance the working life by doing this. Steel and nickel coated material these drill hole saws are made from steel and nickel coated material, the drill head is covered by diamond particles.
Hitachi 728791C 2-Inch Carbide Grit for Hole Saw (Discontinued by Manufacturer)
- Bites through tough materials. 2-inch carbide grit. Retains its form after repeated use. Comes with a 30-day limited warranty. Made of durable carbide.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
