Coolest 16 Centering Chucks

 

6 3-Jaw Plain Back Self-Centering Chuck

6″ 3-Jaw Plain Back Self-Centering Chuck

6″ 3-Jaw Plain Back Self-Centering Chuck - It is 3 jaw, plain back, and self centering. 575 inch. It uses universal scroll chucks and 2 sets of solid jaws. The 3 jaw plain back self-centering chuck has a chuck diameter of 6 inch and a through hole of 1.

 

Bison 6 Hard Top Jaw Self-Centering Chuck For Use With 4-Jaw Chuck

Bison 6″ Hard Top Jaw Self-Centering Chuck For Use With 4-Jaw Chuck

Bison 6″ Hard Top Jaw Self-Centering Chuck For Use With 4-Jaw Chuck - Bison 3″ dia 5/8″ center hole 3-jaw semi-steel body plain back. Bison 6″ hard top jaw self-centering chuck for use with 4-jaw chuck. Bison 6″ dia 1-1/2″ center hole 3-jaw semi-steel body plain back.

 

3 3-Jaw Self-Centering Chuck Lathe Milling Internal External Grinding Machines

3″ 3-Jaw Self-Centering Chuck Lathe Milling Internal External Grinding Machines

3″ 3-Jaw Self-Centering Chuck Lathe Milling Internal External Grinding Machines - Center hole 63″ bolt circle diameter 2598″. Quantity 1 shipping weight 4 lbs. Runout 0003″. Diameter3″ thickness 2″. 3 jaw self centering lathe chuck.

 

Bison 20 Hard Top Jaw Self-Centering Chuck For Use With 4-Jaw Chuck

Bison 20″ Hard Top Jaw Self-Centering Chuck For Use With 4-Jaw Chuck

Bison 20″ Hard Top Jaw Self-Centering Chuck For Use With 4-Jaw Chuck - Bison 20″ hard top jaw self-centering chuck for use with 4-jaw chuck. Bison 8″ hard top jaw self-centering chuck for use with 4-jaw chuck. Bison 12″ dia 4″ center hole 3-jaw steel body plain back.

 

Sherline 1075 - 25 4-Jaw Self-Centering Chuck

Sherline 1075 – 2.5″” 4-Jaw Self-Centering Chuck

Sherline 1075 – 2.5″” 4-Jaw Self-Centering Chuck - The spindle thread is 3/4-16 to fit all sherline and similar spindles. (The stock must be accurately shaped for all four jaws to grip. ) It will also grip thin-wall tubing in four places rather than three, which spreads out the load and allows more grip without crushing the tubing. Centering accuracy on self-centering chucks is to within a few thousandths of an inch. Turning the knurled portion of the outer diameter of the chuck scrolls all four jaws in unison. . Included with the chuck are two tommy bars for tightening and loosening the chuck. It will automatically center square or round stock.

 

Bison 25 Dia 9-78 Center Hole 3-Jaw Semi-Steel Body Plain Back Self-Centering Chuck

Bison 25″ Dia. 9-7/8″ Center Hole 3-Jaw Semi-Steel Body Plain Back Self-Centering Chuck

Bison 25″ Dia. 9-7/8″ Center Hole 3-Jaw Semi-Steel Body Plain Back Self-Centering Chuck - Bison 25″ dia 9-7/8″ center hole 3-jaw semi-steel body plain back. The minimum diameter required for clamping around the work piece is 1-1/4-inch and the minimum diameter required for expansion is 1-13/16-inch. Bison 16″ dia 5-3/8″ center hole 3-jaw semi-steel body plain back.

 

Bison 10 Hard Top Jaw Self-Centering Chuck For Use With 4-Jaw Chuck

Bison 10″ Hard Top Jaw Self-Centering Chuck For Use With 4-Jaw Chuck

Bison 10″ Hard Top Jaw Self-Centering Chuck For Use With 4-Jaw Chuck - Bison 3″ dia 5/8″ center hole 3-jaw semi-steel body plain back. Bison 10″ hard top jaw self-centering chuck for use with 4-jaw chuck. Bison 12″ dia 4″ center hole 3-jaw semi-steel body plain back.

 

4 3-Jaw Plain Back Self-Centering Chuck

4″ 3-Jaw Plain Back Self-Centering Chuck

4″ 3-Jaw Plain Back Self-Centering Chuck - It is 3 jaw, plain back, and self centering. It uses universal scroll chucks and 2 sets of solid jaws. The 3 jaw plain back self-centering chuck has a chuck diameter of 4 inch and a through hole of 0. 866 inch.

 

Bison 16 Dia 5-38 Center Hole 3-Jaw Semi-Steel Body Plain Back Self-Centering Chuck

Bison 16″ Dia. 5-3/8″ Center Hole 3-Jaw Semi-Steel Body Plain Back Self-Centering Chuck

Bison 16″ Dia. 5-3/8″ Center Hole 3-Jaw Semi-Steel Body Plain Back Self-Centering Chuck - The minimum diameter required for clamping around the work piece is 1-1/4-inch and the minimum diameter required for expansion is 1-13/16-inch. Includes t-handled wrenches wood screw point and machined chuck lever. Bison 16″ dia 5-3/8″ center hole 3-jaw semi-steel body plain back.

 

3-Jaw Self-Centering Chuck For Various Lathes Milling Machines External Grinding

3-Jaw Self-Centering Chuck For Various Lathes Milling Machines External Grinding

3-Jaw Self-Centering Chuck For Various Lathes Milling Machines External Grinding - By means of a dial in dicator, check up the adaptor on the spindle nose before mounting the chuck onto it to make sure that it runs correctly do not hammer the workpiece gripped on the chuck so as to prevent possible impairment on the accuracy of the chuck or damage of its component parts chips might get into the chuck during cutting operation. Function this chuck is suitable for use on various lathes,milling machines,ordinary internal and external grinding machines etc,and for holding workpiece so as to aid the machines to acco mplish their cutting operation. Wash and clean the chuck regularly to preserve its accuracy and to avoid possible troubles parameter the product size 39″x39″x3″ (10x10x75cm) package size 63″x63″x63″ (16x16x16cm) net weight:25kg(55lb) gross weight:335kg(737lb) the chuck weight25kg(55lb).

 

1040 - 31 3-Jaw Self-centering Chuck

1040 – 3.1″ 3-Jaw Self-centering Chuck

1040 – 3.1″ 3-Jaw Self-centering Chuck - Includes two spindle bars for adjustment. Jaws scroll together when outer ring of chuck is turned for quick centering of material. ¾-16 thread fits sherline spindles. Hold parts from 3/32 to 1-1/2 in regular position, to 2-3/4 with jaws reversed. Hardened steel reversible jaws.

 

Bison 16 Hard Top Jaw Self-Centering Chuck For Use With 4-Jaw Chuck

Bison 16″ Hard Top Jaw Self-Centering Chuck For Use With 4-Jaw Chuck

Bison 16″ Hard Top Jaw Self-Centering Chuck For Use With 4-Jaw Chuck - Bison 12″ hard top jaw self-centering chuck for use with 4-jaw chuck. Bison 16″ hard top jaw self-centering chuck for use with 4-jaw chuck. Bison 8″ hard top jaw self-centering chuck for use with 4-jaw chuck.

 

Bison 5 Hard Top Jaw Self-Centering Chuck For Use With 4-Jaw Chuck

Bison 5″ Hard Top Jaw Self-Centering Chuck For Use With 4-Jaw Chuck

Bison 5″ Hard Top Jaw Self-Centering Chuck For Use With 4-Jaw Chuck - Bison 5″ hard top jaw self-centering chuck for use with 4-jaw chuck. Bison 16″ dia 5-3/8″ center hole 3-jaw steel body plain back. Bison 12″ dia 4″ center hole 3-jaw steel body plain back.

 

1075 - 25 4-Jaw Self-centering Chuck

1075 – 2.5″ 4-Jaw Self-centering Chuck

1075 – 2.5″ 4-Jaw Self-centering Chuck - Hold parts from 3/32 to 1-3/16 in regular position, to 2-1/4 with jaws reversed. Hardened steel reversible jaws. 4 jaws hold round, square or tubular stock. Includes two spindle bars for adjustment. Jaws scroll together when outer ring of chuck is turned for quick centering of material.

 

Sherline 1079- 25 4-Jaw Self-Centering Chuck

Sherline 1079- 2.5″ 4-Jaw Self-Centering Chuck

Sherline 1079- 2.5″ 4-Jaw Self-Centering Chuck - For larger parts, see the 3. Turning the knurled portion of the outer diameter of the chuckscrolls all four jaws in unison. The spindlethread is 3/4-16 to fit all sherline and similar spindles. 5″ 4-jaw self-centering chuckthis chuck combines the ease-of-use advantages of the 3-jawchuck with some of the advantages of a 4-jaw chuck. ) It will also gripthin-wall tubing in four places rather than three, which spreadsout the load and allows more grip without crushing the tubing. Centering accuracy on self-centering chucks is to within a fewthousandths of an inch. This chuck will hold parts from 3/32″ in diameter up to 1-3/16″with jaws in the normal position and up to 2-1/4″ with the jawsreversed. It willautomatically center square or round stock. Included with the chuck are twotommy bars for tightening and loosening the chuck. 1079, 14mm x 1mm thread 2. If perfect centering accuracy is required,see the section on 4-jaw independent jaw chucks. 1″ chuck, p/n 1076. (The stock must beaccurately shaped for all four jaws to grip.

 

4 3-Jaw Self-Centering Chuck Lathe Milling Internal External Grinding Machines

4″ 3-Jaw Self-Centering Chuck Lathe Milling Internal External Grinding Machines

4″ 3-Jaw Self-Centering Chuck Lathe Milling Internal External Grinding Machines - Diameter 4″ thickness 2165″. Center hole 0866″. Quantity 1 shipping weight 725 lbs. 3 jaw self centering lathe chuck. Bolt circle diameter 330″ runout 0003″.