Best Square Nose out of top 25 in 2019

 

Niagara Cutter N46420 Carbide Square Nose End Mill Metric AlTiN Finish Roughing and Finishing Cut 30 Degree Helix 4 Flutes 39mm Overall Length 3mm Cutting Diameter 3000mm Shank Diameter

Niagara Cutter N46420 Carbide Square Nose End Mill, Metric, AlTiN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 39mm Overall Length, 3mm Cutting Diameter, 3.000mm Shank Diameter

Niagara Cutter N46420 Carbide Square Nose End Mill, Metric, AlTiN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 39mm Overall Length, 3mm Cutting Diameter, 3.000mm Shank Diameter - Square nose end mills (also called square end) create sharp, unrounded cuts. Four flutes produce a better finish than fewer flutes. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Aluminum titanium nitride (altin) coating lubricates the end mill for high-temperature stability and abrasion resistance, offering better heat resistance than tin, tialn, and ticn coatings.

 

Wokesi Pack of 34 6 8mm Blade DiameterExtra Long4FlutesTiAlN CoatedSolid Tungsten steelSquare Nose End MillCNC Router Bits4mm6mm8mm Long HRC45

Wokesi Pack of 3,4 6 8mm Blade Diameter,Extra Long,4Flutes,TiAlN Coated,Solid Tungsten steel,Square Nose End Mill,CNC Router Bits(4mm+6mm+8mm Long, HRC45)

Wokesi Pack of 3,4 6 8mm Blade Diameter,Extra Long,4Flutes,TiAlN Coated,Solid Tungsten steel,Square Nose End Mill,CNC Router Bits(4mm+6mm+8mm Long, HRC45) - Package 1 pack of 3 pieces endmill cutter. High micro hardness,high abrasion resistance,good toughnesscan be high-speed processing. Contains 3pcs4mm4mmshank75mmoal,6mm6mmshank75mmoal,8mm8mmshank100mmoal. Materialtungsten carbide,high quality tialn coating,getting long tool life. Suitable for process alloy,iron and steel under hrc45(hra73)high performance.

 

Niagara Cutter N20081 High Speed Steel Square Nose End Mill Weldon Shank Uncoated Bright Finish RoughingFinishing Cut 30-Degree 2-Flute 23125 OAL 0250 Cut Diameter 0375 Shank Diameter

Niagara Cutter N20081 High Speed Steel Square Nose End Mill, Weldon Shank, Uncoated Bright Finish, Roughing/Finishing Cut, 30-Degree, 2-Flute, 2.3125″ OAL, 0.250″ Cut Diameter, 0.375″ Shank Diameter

Niagara Cutter N20081 High Speed Steel Square Nose End Mill, Weldon Shank, Uncoated Bright Finish, Roughing/Finishing Cut, 30-Degree, 2-Flute, 2.3125″ OAL, 0.250″ Cut Diameter, 0.375″ Shank Diameter - High-speed steel (hss) is compatible with a variety of materials. Square nose end mills (also called square end) create sharp, unrounded cuts. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.

 

Niagara Cutter N86010 Carbide Square Nose End Mill Inch TiAlN Finish Roughing and Finishing Cut 30 Degree Helix 3 Flutes 25 Overall Length 0250 Cutting Diameter 0250 Shank Diameter

Niagara Cutter N86010 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 3 Flutes, 2.5″ Overall Length, 0.250″ Cutting Diameter, 0.250″ Shank Diameter

Niagara Cutter N86010 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 3 Flutes, 2.5″ Overall Length, 0.250″ Cutting Diameter, 0.250″ Shank Diameter - Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than tin and ticn coatings. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Square nose end mills (also called square end) create sharp, unrounded cuts. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications.

 

Niagara Cutter N41682 Cobalt Steel Square Nose End Mill Weldon Shank Uncoated Bright Finish RoughingFinishing Cut 30-Degree 4-Flute 5 OAL 0500 Cut Diameter 0500 Shank Diameter

Niagara Cutter N41682 Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Roughing/Finishing Cut, 30-Degree, 4-Flute, 5″ OAL, 0.500″ Cut Diameter, 0.500″ Shank Diameter

Niagara Cutter N41682 Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Roughing/Finishing Cut, 30-Degree, 4-Flute, 5″ OAL, 0.500″ Cut Diameter, 0.500″ Shank Diameter - Truncated rougher-finisher removes material in less time than conventional end mills while producing a finer finish than fine- or coarse-pitch roughers. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel. Number of flutes varies by diameter for optimum feed and cut rate. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.

 

Moldings Online 2004678243 78 x 1 x 037 Unfinished White Oak Mini Square Nose

Moldings Online 2004678243 78″ x 1″ x 0.37″ Unfinished White Oak Mini Square Nose

Moldings Online 2004678243 78″ x 1″ x 0.37″ Unfinished White Oak Mini Square Nose - . Square nosings are ideal for concealing expansion spaces along a vertical object that cannot be framed, such as sliding glass door or brick fireplace.

 

Enpointâ„¢ TiAlN Coated Stainless Cutting Ultra-fine Submicron Carbide 2-Flute Square Nose End Mill 532 4mm Shank 4mm Cut Width CNC Metalworking Milling Cutter for Aluminum Iron Brass

Enpointâ„¢ TiAlN Coated Stainless Cutting Ultra-fine Submicron Carbide 2-Flute Square Nose End Mill 5/32″ 4mm Shank 4mm Cut Width CNC Metalworking Milling Cutter for Aluminum Iron Brass

Enpointâ„¢ TiAlN Coated Stainless Cutting Ultra-fine Submicron Carbide 2-Flute Square Nose End Mill 5/32″ 4mm Shank 4mm Cut Width CNC Metalworking Milling Cutter for Aluminum Iron Brass - 2 flutes allow for higher feedrates and large chip clearance to prevent chips sticking in the flutes. Produced from a premium, ultra-fine solid carbide for maximum tool strength and durability. Center cutting for straight plunging or ramping down into the workpiece. Mainly suitable for milling materials from soft plastics to tough aerospace alloys including aluminum, stainless steel, mold and alloy steels, inconel, hastelloy and titanium. Coated with ti-al-x-n can cut hard materials and keeps longer tool life sharp cutting edge produces an excellent surface finish.

 

Niagara Cutter N72326 Cobalt Steel Square Nose End Mill Weldon Shank Uncoated Bright Finish Roughing Cut Non-Center 30-Degree 5-Flute 65 OAL 1000 Cut Diameter 1000 Shank Diameter

Niagara Cutter N72326 Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated Bright Finish, Roughing Cut, Non-Center, 30-Degree, 5-Flute, 6.5″ OAL, 1.000″ Cut Diameter, 1.000″ Shank Diameter

Niagara Cutter N72326 Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated Bright Finish, Roughing Cut, Non-Center, 30-Degree, 5-Flute, 6.5″ OAL, 1.000″ Cut Diameter, 1.000″ Shank Diameter - Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel. Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills. Number of flutes varies by diameter for optimum feed and cut rate. Coarse-pitch tooth design is suitable for machining soft, gummy materials. Square end creates sharp, unrounded cuts and has a corner chamfer to strengthen the cutting edges.

 

Niagara Cutter N37647 High Speed Steel Square Nose End Mill Weldon Shank Uncoated RoughingFinishing Cut Non-Center 30-Degree 8-Flute 65 OAL 2000 Cut Diameter 1250 Shank Diameter

Niagara Cutter N37647 High Speed Steel Square Nose End Mill, Weldon Shank, Uncoated, Roughing/Finishing Cut, Non-Center, 30-Degree, 8-Flute, 6.5″ OAL, 2.000″ Cut Diameter, 1.250″ Shank Diameter

Niagara Cutter N37647 High Speed Steel Square Nose End Mill, Weldon Shank, Uncoated, Roughing/Finishing Cut, Non-Center, 30-Degree, 8-Flute, 6.5″ OAL, 2.000″ Cut Diameter, 1.250″ Shank Diameter - Square nose end mills (also called square end) create sharp, unrounded cuts. Number of flutes varies fewer flutes have more chip-carrying capacity and more flutes produce a finer finish. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. High-speed steel (hss) is compatible with a variety of materials.

 

Niagara Cutter N46712 Cobalt Steel Square Nose End Mill Weldon Shank Uncoated Bright Finish Finishing Cut Non-Center 30-Degree 6-Flute 4 OAL 0844 Cut Diameter 0625 Shank Diameter

Niagara Cutter N46712 Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated Bright Finish, Finishing Cut, Non-Center, 30-Degree, 6-Flute, 4″ OAL, 0.844″ Cut Diameter, 0.625″ Shank Diameter

Niagara Cutter N46712 Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated Bright Finish, Finishing Cut, Non-Center, 30-Degree, 6-Flute, 4″ OAL, 0.844″ Cut Diameter, 0.625″ Shank Diameter - Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel. Number of flutes varies fewer flutes have more chip-carrying capacity and more flutes produce a finer finish. Square nose end mills (also called square end) create sharp, unrounded cuts. Non-center-cutting design supports peripheral milling and finishing. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

 

Prefinished Maple Wood Floor Flooring Square NoseCarpet Reducer or End Cap For 916 Floating Wood Floor Molding Trim

Prefinished Maple Wood Floor Flooring Square Nose,Carpet Reducer or End Cap For 9/16″ Floating Wood Floor Molding Trim

Prefinished Maple Wood Floor Flooring Square Nose,Carpet Reducer or End Cap For 9/16″ Floating Wood Floor Molding Trim - Aluminium oxide finish, lifetime warranty. Prefinished maple square nose ( end cap, carpet reducer ). Please note this molding is special order order cannot be cancelled once your order being processed. Length 78″ (65 feet). Solid maple hardwood uses for floor height between 9/16″ to 5/8″.

 

CGC Tools CEM14F3TICN Primate Square Nose End Mill TiCN Coating 3 Flute 14 Diameter 34 LOC 2-12 OAL

CGC Tools CEM14F3TICN Primate Square Nose End Mill, TiCN Coating, 3 Flute, 1/4″ Diameter, 3/4″ LOC, 2-1/2″ OAL

CGC Tools CEM14F3TICN Primate Square Nose End Mill, TiCN Coating, 3 Flute, 1/4″ Diameter, 3/4″ LOC, 2-1/2″ OAL - Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish. Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable. Usa, flat, 3 flute, 1/4” diameter, 3/4” length of cut, 2-1/2” overall length, ticn coating. Extremely versatile in various materials, center cutting, solid sub-micron carbide. This weapon of mass production destroy any competition.

 

CGC Tools GMA14F2 Gorilla Silverback Carbide Square Nose End Mill for Aluminum Flat End 2 Flute 14 Diameter 34 LOC 3 OAL

CGC Tools GMA14F2 Gorilla Silverback Carbide Square Nose End Mill for Aluminum, Flat End, 2 Flute, 1/4″ Diameter, 3/4″ LOC, 3″ OAL

CGC Tools GMA14F2 Gorilla Silverback Carbide Square Nose End Mill for Aluminum, Flat End, 2 Flute, 1/4″ Diameter, 3/4″ LOC, 3″ OAL - Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable. Engineered to repel aluminum for roughing and finishing of non-ferrous materials, high velocity, high material removal rate. Usa, silverback, flat, 2 flute, 1/4″ diameter, 3/4″ length of cut, 3″ overall length. Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish.

 

Wokesi 1mm 15mm 2mm 3mm Cutter DiaPack of 4Std Length4FlutesHRC55TiAlN CoatedMetricSolid CarbideSquare Nose End MillCNC Router Bits Cutting Milling Tools 1mm15mm2mm3mm HRC55

Wokesi 1mm 1.5mm 2mm 3mm Cutter Dia,Pack of 4,Std Length,4Flutes,HRC55,TiAlN Coated,Metric,Solid Carbide,Square Nose End Mill,CNC Router Bits Cutting Milling Tools (1mm+1.5mm+2mm+3mm HRC55)

Wokesi 1mm 1.5mm 2mm 3mm Cutter Dia,Pack of 4,Std Length,4Flutes,HRC55,TiAlN Coated,Metric,Solid Carbide,Square Nose End Mill,CNC Router Bits Cutting Milling Tools (1mm+1.5mm+2mm+3mm HRC55) - 4high micro hardness,high abrasion resistance,good toughness. 5package 1 pack of 4 pieces endmill cutter. 1contains 4pcs square endmills1pc×1mmdia,1pc×15mmdia,1pc×2mmdia and 1pc×3mmdia. 2materialtungsten carbide,high quality tialn coating,getting long tool life. 3suitable for process alloy,iron and steel under hrc55high performance.

 

Niagara Cutter N61647 Carbide Square Nose End Mill Inch TiCN Finish Roughing and Finishing Cut 45 Degree Helix 3 Flutes 4 Overall Length 0375 Cutting Diameter 0375 Shank Diameter

Niagara Cutter N61647 Carbide Square Nose End Mill, Inch, TiCN Finish, Roughing and Finishing Cut, 45 Degree Helix, 3 Flutes, 4″ Overall Length, 0.375″ Cutting Diameter, 0.375″ Shank Diameter

Niagara Cutter N61647 Carbide Square Nose End Mill, Inch, TiCN Finish, Roughing and Finishing Cut, 45 Degree Helix, 3 Flutes, 4″ Overall Length, 0.375″ Cutting Diameter, 0.375″ Shank Diameter - Titanium carbon nitride (ticn) coating lubricates the end mill for high-temperature stability and offers the abrasion resistance required to machine aluminum and other nonferrous materials. 45-degree helix provides the efficient cutting action and chip evacuation required to machine aluminum and other nonferrous materials. Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications. Square nose end mills (also called square end) create sharp, unrounded cuts. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.

 

Niagara Cutter N43326 High Speed Steel Square Nose End Mill Weldon Shank Uncoated Bright Finish RoughingFinishing Cut 30-Degree 4-Flute 75 OAL 1000 Cut Diameter 1000 Shank Diameter

Niagara Cutter N43326 High Speed Steel Square Nose End Mill, Weldon Shank, Uncoated Bright Finish, Roughing/Finishing Cut, 30-Degree, 4-Flute, 7.5″ OAL, 1.000″ Cut Diameter, 1.000″ Shank Diameter

Niagara Cutter N43326 High Speed Steel Square Nose End Mill, Weldon Shank, Uncoated Bright Finish, Roughing/Finishing Cut, 30-Degree, 4-Flute, 7.5″ OAL, 1.000″ Cut Diameter, 1.000″ Shank Diameter - High-speed steel is compatible with a variety of materials. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Number of flutes varies fewer flutes have more chip-carrying capacity and more flutes produce a finer finish. Square nose end mills (also called square end) create sharp, unrounded cuts. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.

 

Niagara Cutter N35160 High Speed Steel Square Nose End Mill Weldon Shank TiN Finish RoughingFinishing Cut Non-Center 30-Degree 4-Flute 325 OAL 0500 Cut Diameter 05000 Shank Diameter

Niagara Cutter N35160 High Speed Steel Square Nose End Mill, Weldon Shank, TiN Finish, Roughing/Finishing Cut, Non-Center, 30-Degree, 4-Flute, 3.25″ OAL, 0.500″ Cut Diameter, 0.5000″ Shank Diameter

Niagara Cutter N35160 High Speed Steel Square Nose End Mill, Weldon Shank, TiN Finish, Roughing/Finishing Cut, Non-Center, 30-Degree, 4-Flute, 3.25″ OAL, 0.500″ Cut Diameter, 0.5000″ Shank Diameter - Square nose end mills (also called square end) create sharp, unrounded cuts. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. High-speed steel is compatible with a variety of materials. Titanium nitride (tin) is a general-purpose coating that combines high-temperature resistance and increased hardness compared to uncoated end mills. Number of flutes varies fewer flutes have more chip-carrying capacity and more flutes produce a finer finish.

 

YG-1 E5977 Carbide Square Nose End Mill Extra Long Reach TiCN Monolayer Finish Finishing Cut Non-Center Cutting 37 Deg Helix 3 Flutes 4 Overall Length 0375 Cutting Diameter 0375 Shank Diameter

YG-1 E5977 Carbide Square Nose End Mill, Extra Long Reach, TiCN Monolayer Finish, Finishing Cut, Non-Center Cutting, 37 Deg Helix, 3 Flutes, 4″ Overall Length, 0.375″ Cutting Diameter, 0.375″ Shank Diameter

YG-1 E5977 Carbide Square Nose End Mill, Extra Long Reach, TiCN Monolayer Finish, Finishing Cut, Non-Center Cutting, 37 Deg Helix, 3 Flutes, 4″ Overall Length, 0.375″ Cutting Diameter, 0.375″ Shank Diameter - Extended-reach neck style provides access to recessed areas of the workpiece. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix. Titanium carbon nitride (ticn) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than uncoated tools. Suitable for high-performance machining on aluminum and other nonferrous materials.

 

Melin Tool AMG-E Carbide Square Nose End Mill AlTiN Monolayer Finish 30 Deg Helix 2 Flutes 4 Overall Length 02500 Cutting Diameter 025 Shank Diameter

Melin Tool AMG-E Carbide Square Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 2 Flutes, 4″ Overall Length, 0.2500″ Cutting Diameter, 0.25″ Shank Diameter

Melin Tool AMG-E Carbide Square Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 2 Flutes, 4″ Overall Length, 0.2500″ Cutting Diameter, 0.25″ Shank Diameter - Suitable for general-purpose machining on most medium-hardness materials, including steel and iron. Aluminum titanium nitride (altin) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than tin, tialn, and ticn coatings. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Square nose end mills (also called square end) create sharp, unrounded cuts. Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.

 

Niagara Cutter N55442 Carbide Square Nose End Mill Inch TiAlN Finish Roughing and Finishing Cut 30 Degree Helix 2 Flutes 4 Overall Length 0313 Cutting Diameter 0313 Shank Diameter

Niagara Cutter N55442 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 4″ Overall Length, 0.313″ Cutting Diameter, 0.313″ Shank Diameter

Niagara Cutter N55442 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 4″ Overall Length, 0.313″ Cutting Diameter, 0.313″ Shank Diameter - Square nose end mills (also called square end) create sharp, unrounded cuts. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cuttings speeds, offering better heat resistance than tin and ticn coatings. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.

 

Niagara Cutter N30326 High Speed Steel HSS Square Nose End Mill Inch Uncoated Bright Finish Finishing Cut 30 Degree Helix 3 Flutes 65 Overall Length 1000 Cutting Diameter 1000 Shank Diameter

Niagara Cutter N30326 High Speed Steel (HSS) Square Nose End Mill, Inch, Uncoated (Bright) Finish, Finishing Cut, 30 Degree Helix, 3 Flutes, 6.5″ Overall Length, 1.000″ Cutting Diameter, 1.000″ Shank Diameter

Niagara Cutter N30326 High Speed Steel (HSS) Square Nose End Mill, Inch, Uncoated (Bright) Finish, Finishing Cut, 30 Degree Helix, 3 Flutes, 6.5″ Overall Length, 1.000″ Cutting Diameter, 1.000″ Shank Diameter - Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Square nose end mills (also called square end) create sharp, unrounded cuts. Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications. High-speed steel is compatible with a variety of materials. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

 

Moldings Online 3798978243 78x 1x 037 Armstrong Loft Gray Alterna Maple Mini Square Nose 78 L

Moldings Online 3798978243 78″x 1″x 0.37″ Armstrong Loft Gray Alterna Maple Mini Square Nose, 78″ L

Moldings Online 3798978243 78″x 1″x 0.37″ Armstrong Loft Gray Alterna Maple Mini Square Nose, 78″ L - Square nosing is ideal for concealing expansion spaces along a vertical object that cannot be framed, such as sliding glass door or brick fireplace. .

 

DIAOSnx 18 532 316 14 516 38 12 High Speed Steel HSS 4 Flute Straight Shank Square Nose End Mill Cutter CNC Router Bits Cutting Milling Tools Set of 7

DIAOSnx 1/8″ 5/32” 3/16″ 1/4″ 5/16″ 3/8″ 1/2″ High Speed Steel HSS 4 Flute Straight Shank Square Nose End Mill Cutter CNC Router Bits Cutting Milling Tools (Set of 7)

DIAOSnx 1/8″ 5/32” 3/16″ 1/4″ 5/16″ 3/8″ 1/2″ High Speed Steel HSS 4 Flute Straight Shank Square Nose End Mill Cutter CNC Router Bits Cutting Milling Tools (Set of 7) - Package includes 7×end mill cutter hss-al, 4 flute, straight shank, square nose. Note due to the different measurement methods, the size may have 1-2cm error. Suitable for cnc data processing center, carved, high-speed machines can milling of copper, aluminum, tool steel, cast iron, etc square nose endmills size 1/8” cutter blade diameter=1/8”, shank diameter=1/4”, flute length=7/16”, overall length=2-3/8” 5/32” cutter blade diameter=5/32”, shank diameter=1/4, flute length=1/2”, overall length=2-1/4” 3/16” cutter blade diameter=3/16”, shank diameter=1/4”, flute length=9/16”, overall length=2-1/4” 1/4” cutter blade diameter=1/4”, shank diameter=1/4”, flute length=3/4”, overall length=2-1/3” 5/16” cutter blade diameter=5/16”, shank diameter=5/16””, flute length=7/8”, overall length=2-4/9” 3/8” cutter blade diameter=3/8”, shank diameter=3/8”, flute length=1”, overall length=2-3/4” 1/2” cutter blade diameter=1/2”, shank diameter=1/2”, flute length=1-1/2”,overall length=3-3/8”.

 

Moldings Online 78 x 11875 x 059 Armstrong Canyon Kingsford Solid White Oak Square Nose 78 L

Moldings Online 78″ x 1.1875″ x 0.59″ Armstrong Canyon Kingsford Solid White Oak Square Nose, 78″ L

Moldings Online 78″ x 1.1875″ x 0.59″ Armstrong Canyon Kingsford Solid White Oak Square Nose, 78″ L - . Square nosing is ideal for concealing expansion spaces along a vertical object that cannot be framed, such as sliding glass door or brick fireplace.

 

Niagara Cutter N40321 High Speed Steel Square Nose End Mill Weldon Shank TiN Finish Roughing and Finishing Cutting 30-Degree 4-Flute 4125 OAL 1000 Cut Diameter 0750 Shank Diameter

Niagara Cutter N40321 High Speed Steel Square Nose End Mill, Weldon Shank, TiN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 4.125″ OAL, 1.000″ Cut Diameter, 0.750″ Shank Diameter

Niagara Cutter N40321 High Speed Steel Square Nose End Mill, Weldon Shank, TiN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 4.125″ OAL, 1.000″ Cut Diameter, 0.750″ Shank Diameter - H13a uncoated carbide grade provides a balance of hardness and toughness for resistance to wear and shock. Roughing (kr) and medium-machining (km) chipbreaker styles help prevent chip buildup at a range of cutting depths and feed rates. Square shape offers edge strength and is suitable for roughing, facing, interrupted cuts, and large lead angles. Positive single-sided insert with 7-degree clearance angle for light cutting forces and side clearance. Designed for turning operations, roughing to medium machining — on aluminum in average machining conditions.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.