Lisle 70940 3-Piece Tap Socket Set
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shank with square end. Sold individually. Made of carbon steel. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
UEB Fluted Screw Set,5Pcs Machine Screw Metric Thread Plug Taps Set M3 M4 M5 M6 M8
- Size 3mm 4mm 5mm 6mm 8mm. Length 46mm / 49mm / 55mm / 59mm / 59mm. Ideal for auto repair and machinery where metric threads are specified. Net weight 3g / 5g / 8g / 12g / 25g. Material high speed steel 6542 45 steel processing (steel mould bearing steel).
Chicago Latrobe GT18 High-Speed Steel Jobber Length Drill Bit and Spiral Point Tap Set with Metal Case, Uncoated (Bright) Finish, 18-piece, Wire Size, Letter, Inch, #6-32 to 1/2″-13 Tap Sizes
- Set contains 9 spiral point taps, including thread sizes 6-32 unc, 8-32 unc, 10-24 unc, 10-32 unf, 1/4″-20 unc, 5/16″-18 unc, 3/8″-16 unc, 7/16″-14 unc, and 1/2″-13 unc. High-speed steel (hss) provides hardness for wear resistance. Set contains 9 jobber length drill bits, including wire gauge sizes #36, #29, #25, #21,and #7 letter sizes f and u and inch sizes 5/16″ and 27/64″. 118-degree conventional point on the drill bit for a range of drilling applications. Uncoated (bright) finish provides an untreated surface.
Craftsman 14pc metric tap set Black
- Hardened, precision-ground high carbon steel. 14 taps 10mm x 150, 10mm x 125, 10mm x 100, 9mm x 125, 9mm x 100, 8mm x 125, 7mm x 100 6mm x 100, 5mm x 090, 5mm x 080, 4mm x 075, 4mm x 070, 3mm x 060, 3mm x 050,. 14 pc metric tap set contains the most popular sizes of metric taps. Rust-resistant satin finish.
Chicago Latrobe HM18 High-Speed Steel Jobber Length Drill Bit and Tap Set with Metal Case, Black Oxide Drill Bits/Uncoated Taps, Metric, 18-piece, Metric Drill Bit Sizes, M2.5 to M12 Tap Sizes
- Set contains 9 jobber length drill bits, including metric sizes 205, 25, 29, 33, 42, 50, 67, 85, and 102 mm. Black oxide finish on drill bits reduces wear while promoting chip and coolant flow on ferrous materials, and the uncoated (bright) finish on hand taps provides an untreated surface that can be used on a range of materials, especially soft metals. Set contains 9 plug-chamfer hand taps, including thread sizes m25 x 045, m3 x 05, m35 x 06, m4 x 07, m5 x 08, m6 x 1, m8 x 125, m10 x 15, and m12 x 175. 118-degree conventional point on the drill bit for a range of drilling applications. High-speed steel (hss) provides hardness for wear resistance.
Neiko 00916A SAE Pro-Grade Large-Diameter Titanium Tap & Die Set (45 Piece)
- 10 unc dies size 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13, 9/16-12, 5/8-11, 3/4-10, 7/8-9,1-8. Professional quality. 10 unf dies size 1/4-20, 5/16-18, 3/8-24, 7/16-20, 1/2-20, 9/16-18, 5/8-18, 3/4-16, 7/8-14, 1-14. 10 unf taps size 1/4-20, 5/16-18, 3/8-24, 7/16-20, 1/2-20, 9/16-18, 5/8-18, 3/4-16, 7/8-14, 1-14. 10 unc taps size 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13, 9/16-12, 5/8-11, 3/4-10, 7/8-9,1-8.
AccusizeTools – 18 Pcs/Set H.S.S. Tap & Drill Set, Metric, #0001-0052
- 18 pcs metric tap & drill set. Contains 25 x 45 mm tap, 205 drill 400 x 50 mm tap, 250 mm drill 35 x 60 mm tap, 290 mm drill 40 x 70 mm tap, 330 mm drill 50 x 80 mm tap, 420 mm drill 60 x 100 mm tap, 500 mm drill 80 x 125 mm tap, 670 mm drill 100 x 150 mm tap, 850 mm drill 120 x 175 mm tap, 1020 mm drill.
INHDBOX 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set
- 100% brand new and high quantity. High hardness, fast cutting, wear high temperature. Sticky materials processing. Spiral tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and. Spiral groove is conducive to remove crumbs, not easily broken tap.
Kodiak Cutting Tools KCT202717 USA Made 1/4-20 Hand Threading Tap Set, Includes Taper, Plug and Bottom Taps, Ground Threads, High Speed Steel, H3 Limit, 4 Flute, 1/4″ Diameter x 20 TPI (Pack of 3)
- 255″ shank 1 thread length 2-1/2″ overall length 4 flute standard hand threading tap. 1/4-20 hand threading tap. .
GORCHEN Drill Tap Bit Combination Tool Kit Set Hex Shank Titanium Metric Deburr Countersink Bit HSS M3-M10
- Suitable for drilling and tapping in wood, plastic and soft metal like aluminum, copper, etc. Material hardened high speed steel 6542 with titanium coated, ensures durable sharp. Size m3 x 05, m4 x 07, m5 x 08, m6 x 1, m8 x 125, m10 x 15. Package one plastic storage case with 6 drill tap bits inside. Feature drill, tap and deburr/countersink in one operation, save time and efficient.
Plum Garden 5Pcs M3-M8 Hand Screw Tap Set & Adjustable T-Handle Ratchet Tap Holder Wrench
- Made of steel with chromium-plated, switched from left to right handed operation easily, or locked for non-ratcheting use. 3mm-8mm t-handle ratchet tap wrench machinist tool. T-handle ratcheting tap wrenches three position gear box for quick, efficient ratcheting action. Designed for use with taps and can also use on the left hand tap, reamers, screw extractors and other tools with a square shank. Knurled nut for tightening ratchet action with three positions forward, reverse and lock.
Drill America DWT Series Qualtech Carbon Steel Hand Threading Tap SET, Uncoated (Bright) Finish, Round with Square End Shank, M4 x 0.7 Size
- Round shank with square end. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Made of carbon steel. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Champion 308-10-32-S HSS Hand Tap Set Taper-Bottom-Plug, Ground Thread H3 Limit, 3-Piece
- Ground thread “h1″ limit taps create new threads and clean up damaged threads. Ground threads will achieve close tolerances for safe, secure fastening. Champion cutting tool 308 series high speed steel hand tap 3 piece sets come matched with a taper, bottom and plug tap. Operated in hand tapping wrenches or production tapping heads for general purpose tapping in professional settings. Used for starting a threaded hole. Bottoming taps have only 1 to 1-1/2 threads of chamfer and are used to tap to the bottom of a blind hole. . Taper taps distribute the cutting load across 7-10 threads. Plug taps are most commonly used, distributing the load across 3-5 threads of champer. These taps are supplied in standard “h” limits that will provide an adequate “class of fit” for standard tapping applications.
Gyros 93-04101 Model Railroad Tap Set, 4-Piece
- Used for putting threads in a hole made with a tap drill. This four (4) piece set was specifically designed for the model railroad enthusiasts. Set includes the following taps. Can be used for a wide range of materials such as low carbon steels, stainless steel, copper, brass, aluminum and plastics.
Swordfish 8032 – Alloy Steel Hand Threading Tap Set of 3 pcs Bottoming Plug Taper Uncoated Finish Square End 7/8″-14
- Each set includes 1 taper, bottoming and plug tap in the specified size. Straight flute type, round with square end shank, uncoated (bright) finish. Ideal for auto repair and machinery. Alloy steel materials, unf thread.
Morse Cutting Tools 33919 Straight Flute Hand Tap Sets, High-Speed Steel, Bright Finish, H2 Pitch Diameter, 4 Flutes, #8-32 Size
- . Straight flute hand taps are used for hand tapping and machine tapping in through holes or blind holes in a wide variety of materials.
M4 x 0.7 Metric 3 Flutes Bottoming Plug Taper Hand Taps Set 3 Pcs
- Shank diameter 5mm / 02″overall length 56mm / 22″. Thread type bottoming , plug , tapernumber offlutes 3flute diameter m4(4mm). Product name hand tapmaterial sks2color silver tone. Weight 23gpackage content 3 x hand tap 1 x plastic storage case. Flute length(approximately) 20mm/ 08″pitch size 07mmsquareend size 4 x 4mm / 016″ x 016″(lw).
Weaver Drill and Tap Set 6/48-32
- Uncoated (bright) tools have no additional surface treatment or coating, for use on a broad range of materials. Weaver we drill & tap set 6/48-32 correct size tap drill for popular sizes of. Available in unc (unified coarse), unf (unified fine), or uns (unified special) right-hand thread options for different applications. Hand threading tap set with straight flutes cuts threads in through holes and blind holes. Round shank with square end allows tap to be used in hand or power-driven applications.
Irwin Industrial Tools 1921ZR Taper Pipe Tap Set, 6-Piece
- Available in national pipe taper (npt) and british standard pipe taper (bsp). Tapered at a rate of 3/4-inch per foot. Nominal size of the tap is that of the pipe fitting being tapped. Includes one taper tap each of 1/8″, 27 npt, 1/4″, 18 npt, 3/8″, 18 npt, 1/2″, 14 npt, 3/4″, 14 npt, and 1″, 11-1/2 npt made in the usa. Cuts internal threads in pipes ideal for pipe fittings.
Spark Plug Chaser Tap Set 14mm and 18mm 2 Pack
- Designed for use with taps and can also use on the left hand tap, reamers, screw extractors and other tools with a square shank. T-handle ratcheting tap wrenches three position gear box for quick, efficient ratcheting action. Knurled nut for tightening ratchet action with three positions forward, reverse and lock. Made of steel with chromium-plated, switched from left to right handed operation easily, or locked for non-ratcheting use. Spark plug hole tap.
Norseman Super Premium Drill and Tap Set – 18 Piece Set – 57580 – Black and Gold Oxide
- Precision ground point, flutes, body, clearance, and drill diameters for the best accuracy and performance. Self-centering split point provides excellent drilling accuracy and precision. Black and gold oxide finish body and clearance are gold surface treated for maximum lubricity. Usa made. Heat treated to 2185° f and then nitro carburized at 950° f to be measurably harder than high speed steel.
High Carbon Steel Fractional Tap Sets – set 3/4-10nc 3pc tap hanson
- 2658zr, tap 3/4″-10nc 3pc set”. Threading taps. Made in the united states.
Union Butterfield 1500S(UNC) High-Speed Steel Hand Tap Set, Uncoated (Bright) Finish, Round Shank With Square End, 3-Piece (1 Taper, 1 Plug, 1 Bottoming Chamfer), 7/16″-14 Thread Size
- Hand threading tap set with straight flutes cuts threads in through holes and blind holes. High-speed steel is compatible with a variety of materials. Uncoated (bright) tools have no additional surface treatment or coating, for use on a broad range of materials. Available in unc (unified coarse), unf (unified fine), or uns (unified special) right-hand thread options for different applications. Round shank with square end allows tap to be used in hand or power-driven applications.
Du-Bro 360 2-56 Tap And Drill Set
- Round shank with square end. Made of carbon steel. High quality steel tap and drill set. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
