Knipex 4521200 Special Rings Retaining Ring Pliers 8-Inch
- For retaining rings from 120 mm in diameter for securing the drive shaft in the gearbox of a motor vehicle. Angled jaws with centering hole. High-grade special tool steel, forged, oil-hardened. Minimum ring split gap of the rings 22 mm. Plastic coated handles.
Lang Tools 1434 Internal/External Quick Switch Retaining Ring Pliers and Tip Kit
- Includes 5 pairs of alloy steel, color-coded, interchangeable tips and hex key all stored in a handy pouch. Internal 3/8″ thru 2″/external 1/4″ thru 2″. Comfort grip made of low-temp, high-impact material providing extra durability. A flip of the tab and the pliers change between internal and external applications.
SK Hand Tool 7626 Retaining Ring Pliers, 0.038-Inch
- A. You can convert these pliers from internal rings to external rings, so you only need one set of pliers per tip size and angle. S. Made in the u.
Knipex 4611A0 External Straight Retaining Ring Pliers 5.75-Inch
- Plastic coated handles. Tips are forged outward and are used for installing rings on the outside of a shaft or groove. Forged from chrome vanadium electric steel and designed to minimize tip breakage, and offer extended tool life. For easy fitting of external circlips. For rings 3, 10 mm in diameter.
RETAINING RING, XP12
- Part no 8614-4620. Retaining ring, xp12.
Knipex 4411J0 Internal Straight Retaining Ring Pliers 5.75-Inch
- Plastic coated handles. For rings of 8, 13 mm in diameter. Tips are forged inward to prevent retaining rings from slipping off and are used for installing & removing internal rings on the inside bore holes. For easy fitting of internal snap rings. Forged from chrome vanadium electric steel and designed to minimize tip breakage, and offer extended tool life.
Knipex 4621A11 External Angled Retaining Ring Pliers 5-Inch
- For rings 10, 25 mm in diameter. Forged from chrome vanadium electric steel and designed to minimize tip breakage, and offer extended tool life. Tips are forged outward and are used for installing rings on the outside of a shaft or groove. For easy fitting of external circlips. Plastic coated handles.
Knipex 4510170 Special Rings Retaining Ring Pliers 6.75-Inch
- High-grade special tool steel, forged, oil-hardened. For fitting horseshoe-shaped spring retaining rings and circlips without grip holes. With opening spring. For retaining rings with a minimum ring split gap of 36 mm.
Channellock 929 10-Inch Retaining Ring Plier
- A. ) 10, material type steel, tip type replaceable, internal/external convertible, handle type channellock blue comfort grip, pieces (qty. Long channellock retaining ring pliers handle both internal and external retaining rings up to 4in. U. Tool length (in. S. ) 1. Includes 6 color-coded interchangeable tips. 10in. Distinctive channellock blue grips for hand comfort.
Knipex 4921A31 External Angled Precision Retaining Ring Pliers 8.5-Inch
- For rings 40, 100 mm in diameter. Forged from chrome vanadium electric steel and designed to minimize tip breakage, and offer extended tool life. Plastic coated handles. Large contact faces on the tips no distortion of circlips, easy fitting. Sturdy, inserted tips made from high density drawn spring wire.
Knipex 4621A01 External Angled Retaining Ring Pliers 5-Inch
- For rings 3, 10 mm in diameter. For easy fitting of external circlips. Tips are forged outward and are used for installing rings on the outside of a shaft or groove. Forged from chrome vanadium electric steel and designed to minimize tip breakage, and offer extended tool life. Plastic coated handles.
Knipex 4821J31 Internal Angled Precision Retaining Ring Pliers 8.5-Inch
- For rings 40, 100 mm in diameter. Large contact faces on the tips no distortion of circlips, easy fitting. Forged from chrome vanadium electric steel and designed to minimize tip breakage, and offer extended tool life. Plastic coated handles. Sturdy, inserted tips made from high density drawn spring wire.
Heavy Duty 7″ EXTRA LONG Internal Straight Retaining Ring Clip Circlip Removal Plier
- Length225mm tip length75mm tip diameterØ12mm. A flip of the tab and the pliers change between internal and external applications. Internal 1-13/16″ thru 4″/external 1-1/2″ thru 4″. Includes 6 pairs of alloy steel, color-coded, interchangeable tips and hex key all stored in a handy pouch. Automatic ratchet lock feature keeps rings open or closed for easy installation and removal.
Stanley Proto J364 Proto 16-1/2-Inch Retaining Ring Pliers, Internal, Large
- Heavy and large rings are safely and easily controlled. Replaceable tips in 0°, 45° and 90° make it possible to remove and install rings in most applications. (Replacements available). Stanley j364 proto large retaining ring pliers, internal 16-1/2-inch spring-loaded ratchet mechanism minimizes operator fatigue by allowing the ring to be compressed or expanded through gradual -inch moves and then locks at the desired size without continued pressure on the handles. . 120 tip size 16-1/2-inch length.
Wiha 71499 Bit Holders with Spring Steel Retaining Rings, 5 Piece
- 5 piece set includes the following lengths metric 60, 100, 150, 200, 253mm. Bit holder retaining ring & magnetic for insert bits 1/4″ x 1/4″ x 2. 4″, 10″ oal.
Klein Tools 73426 7-5/8-Inch Retaining Ring Pliers – Convertible
- Heat-treated tips for long-lasting life and secure gripping. Adjustable for internal and external retaining-rings. Klein offers a lifetime warranty on material defects and workmanship for the normal life of the product. Sturdy steel construction with corrosion-resistant black-oxide finish. Overall length 5-5/8-inch.
Stanley Proto J365 Proto 16-1/2-Inch Retaining Ring Pliers, Large
- (Replacements available). Stanley j365 proto large retaining ring pliers, external 16-1/2-inch spring-loaded ratchet mechanism minimizes operator fatigue by allowing the ring to be compressed or expanded through gradual -inch moves and then locks at the desired size without continued pressure on the handles. Heavy and large rings are safely and easily controlled. Replaceable tips in 0°, 45° and 90° make it possible to remove and install rings in most applications. 120 tip size.
Knipex 4411J4 Internal Straight Retaining Ring Pliers 12.75-Inch
- Tips are forged inward to prevent retaining rings from slipping off and are used for installing & removing internal rings on the inside bore holes. For rings of 85, 140 mm in diameter. For easy fitting of internal snap rings. Forged from chrome vanadium electric steel and designed to minimize tip breakage, and offer extended tool life. Plastic coated handles.
Lang Tools 75 Internal/External Quick Switch Retaining Ring Pliers
- Includes 6 pairs of alloy steel, color-coded, interchangeable tips and hex key all stored in a handy pouch. Internal 1-13/16″ thru 4″/external 1-1/2″ thru 4″. A flip of the tab and the pliers change between internal and external applications. Comfort grip made of low-temp, high-impact material providing extra durability. Automatic ratchet lock feature keeps rings open or closed for easy installation and removal.
Knipex 4811J3 Internal Straight Precision Retaining Ring Pliers 9-Inch
- Sturdy, inserted tips made from high density drawn spring wire. For rings 40, 100 mm in diameter. Large contact faces on the tips no distortion of circlips, easy fitting. Plastic coated handles. Forged from chrome vanadium electric steel and designed to minimize tip breakage, and offer extended tool life.
Lang Tools 1421 Internal/External Quick Switch Retaining Ring Pliers
- Adjustable stop on the pliers jaw allows you to turn clockwise to reduce jaw opening and counter-clockwise to increase jaw opening. Includes 5 pairs of alloy steel, color-coded, interchangeable tips and hex key all stored in a handy pouch. A flip of the tab and the pliers change between internal and external applications. Internal 1/4″ thru 1″/external 1/8″ thru 1″. Comfort grip made of low-temp, high-impact material providing extra durability.
Knipex 4621A21 External Angled Retaining Ring Pliers 6.75-Inch
- Plastic coated handles. Forged from chrome vanadium electric steel and designed to minimize tip breakage, and offer extended tool life. For rings 19, 60 mm in diameter. Tips are forged outward and are used for installing rings on the outside of a shaft or groove. For easy fitting of external circlips.
Stanley Proto J395 9-1/8-Inch Proto Retaining Ring Pliers External
- Stanley j395 proto retaining ring pliers external, 9-1/8-inch used with external retaining rings. . 115 tip size. Fixed tips are precision formed and induction hardened for accurate fit and long wear.
Wright Tool 9H87 Retaining Ring Tool with Automatic Lock-In Plastic Case
- Adjustable stop and replacement tips. High quality and cost effective. Quick and easy conversion to and from such use without disassembly. Tips colors and sizes includes black 120, silver 150 and copper 180. Internal is 3 1/2 to 7 inch and the external is 3 1/2 to 7 inch.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
