Best and Coolest 24 Lathe Chucks

 

Lathe Chuck 3-Jaw 3

Lathe Chuck, 3-Jaw 3″

Lathe Chuck, 3-Jaw 3″ - It holds work up to 2. 48″ (63 mm) in diameter. The radial runout of a test bar held in this chuck, when the chuck is mounted true, is 0. It includes a chuck key, inside and outside jaws, and mounting bolts. This 3 inch 3-jaw self-centering lathe chuck is the one that comes on the mini lathe. This chuck has a 0. 63″ (16 mm) through hole. 003″ maximum.

 

HHIP 3900-4865 14 Square Head Standard Lathe Chuck Wrench

HHIP 3900-4865 1/4″ Square Head Standard Lathe Chuck Wrench

HHIP 3900-4865 1/4″ Square Head Standard Lathe Chuck Wrench - For use on lathe chucks. Hhip 1/4″ square head standard lathe chuck wrench is made of high quality tool steel. .

 

PSI Woodworking LCM18X 3 Jaw Micro Wood Lathe Chuck

PSI Woodworking LCM18X 3 Jaw Micro Wood Lathe Chuck

PSI Woodworking LCM18X 3 Jaw Micro Wood Lathe Chuck - The provided step jaws reverse for extra versatility when securing the work piece from the outside, or inside. The smaller diameter offers a safety feature keeping your knuckles away from the jaws when working close to the chuck. Uses small levers to open and tighten the three jaws. This self centering, 3 jaw micro chuck is ideal for holding small projects from the inside or outside. Weighs only 1. . 2 pounds. Holds a workpiece from 3/4″ to 2-1/2″ inside diameter, and a workpiece from zero to 1-1/4″ outside diameter. Pre cut with a 1″ x 8 tpi standard thread mount, and includes an adapter for 3/4″ x 16 tpi spindles.

 

Shop Fox D4103 Mini Lathe Chuck with Arbors

Shop Fox D4103 Mini Lathe Chuck with Arbors

Shop Fox D4103 Mini Lathe Chuck with Arbors - This 2-inch diameter 3-jaw mini lathe chuck is a self-centering scroll type chuck with reversible jaws. 1 and mt no. Includes mt no. 2 arbors and wrenches.

 

PSI CSC2000C Barracuda Wood Lathe Chuck System

PSI CSC2000C Barracuda Wood Lathe Chuck System

PSI CSC2000C Barracuda Wood Lathe Chuck System - Includes #2 round jaws, for dowels1-1/2″ to 2-7/8″, holes 2″ to 3-1/2″. Includes four(4) self-centering jaw sets to hold round and square stock for turning, pre-threaded for 1″ x 8 tpi, and has an adapter for 3/4″ x 16 tpi spindles. Includes #1 step jaws- for dowels 1/32″ to 1-1/2″, holes 11/16″to 3-1/8″. Includes pin jaws which hold inside holes 1″, 2-1/2″, and a screw chuck. Includes #3 round jaws, external grip 3-1/16″, 4-1/2″.

 

NOVA 48202 G3 WOODLATHE CHUCK WITH 2 JAWS WOODWORM SCREW IDNS 1 X 8TPI INSERT

NOVA 48202 G3 WOODLATHE CHUCK WITH 2″ JAWS, WOODWORM SCREW, & IDNS 1″ X 8TPI INSERT

NOVA 48202 G3 WOODLATHE CHUCK WITH 2″ JAWS, WOODWORM SCREW, & IDNS 1″ X 8TPI INSERT - Fitting nicely in between the nova midi chuck and the supernova 2 chuck, the g3 is an economical option featuring the fast one handed operation of the keyed articulation at price that is more affordable than anything of this quality and with this many features on the market. Recommended for turning bowls up to 12″ in diameter with the included 2″ (50mm) dovetail jaw set. Comes with a 2″ dovetail jaw set, heavy duty woodworm screw for starting your bowls, and the threaded insert to fit your lathe. The latest addition to the nova chuck line. Yes, it also accepts all other nova and super nova accessories, and is ideal for mini, midi, and other lathes up to 14″ swing over bed.

 

Lathe Chuck 3-Jaw 4 with Adapter

Lathe Chuck, 3-Jaw 4″ with Adapter

Lathe Chuck, 3-Jaw 4″ with Adapter - This chuck has a 0. 4 inch, 3-jaw self-centering lathe chuck with adapter for the mini lathe. Includes chuck key, inside and outside jaws, and mounting bolts. The radial runout of a test bar held in this chuck, when the chuck is mounted true, is 0. 003″ maximum. The chuck can hold work up to 3. 15″ (80 mm) in diameter and comes with an adapter for the mini lathe so that you can bolt it on in place of a 3″ (80 mm) chuck. 87″ (22 mm) through hole.

 

HHIP 3900-4706 MT2 Shank 3 3-Jaw Lathe Chuck with Threaded Drawbar End 38 - 16 Thread

HHIP 3900-4706 MT2 Shank 3″ 3-Jaw Lathe Chuck with Threaded Drawbar End, 3/8 – 16 Thread

HHIP 3900-4706 MT2 Shank 3″ 3-Jaw Lathe Chuck with Threaded Drawbar End, 3/8 – 16 Thread - ~ Supplied with chuck wrench. 3″ 3-jaw lathe chuck with mt2 shank ~ threaded drawbar end 3/8-16 ~ steel body-hardened and ground scroll and pinions. ~ includes 2 sets of solid steel jaws, both internal and external. ~ Hardened and ground mt spindle.

 

LCK-4375 716 Square Lathe Chuck Key

LCK-4375 7/16″ Square Lathe Chuck Key

LCK-4375 7/16″ Square Lathe Chuck Key - Square end 4375″. Plain key (no ejecting spring).

 

Hurricane Turning Tools HTC125 5-Inch Woodturning 4 Jaw Chuck Kit with Dovetail Jaws for Wood Lathes with 1 14 x 8-Inch TPI Spindles

Hurricane Turning Tools HTC125 5-Inch Woodturning 4 Jaw Chuck Kit with Dovetail Jaws for Wood Lathes with 1 1/4 x 8-Inch TPI Spindles

Hurricane Turning Tools HTC125 5-Inch Woodturning 4 Jaw Chuck Kit with Dovetail Jaws for Wood Lathes with 1 1/4 x 8-Inch TPI Spindles - This is a 5″ chuck which compares in size to the vicmarc vm120 chucks. This is an outstanding quality chuck that compares to some of the “famous names” on the market. We would like to introduce you to the hurricane htc125 125mm (5″) 4 jaw self centering woodturning chuck. Please note that this chuck is the larger in size of the two hurricane chucks. Available in several spindle threads to suit almost all lathes. It is recommended for full size lathes only. If you are looking for a smaller chuck for small to medium bowls, check out the htc100 4″ chuck in our amazon store. It provides a superb grip on your woodturning projects such as bowls and platters. Many optional jaw sets are available (sold separately) for various woodturning applications. It is perfect for large bowl projects.

 

ECC-8 8 P290 3-Jaw Universal Lathe Chuck with 2-piece reversible jaws

ECC-8 8″ P290 3-Jaw Universal Lathe Chuck with 2-piece reversible jaws

ECC-8 8″ P290 3-Jaw Universal Lathe Chuck with 2-piece reversible jaws - Style p290 chucks include master jaws with hard reversible top jaws. Includes key. Plain back. . Semi-steel.

 

LCK-3125 516 Square Lathe Chuck Key

LCK-3125 5/16″ Square Lathe Chuck Key

LCK-3125 5/16″ Square Lathe Chuck Key - Square end 3125″. Plain key (no ejecting spring).

 

HHIP 3900-4866 516 Square Head Standard Lathe Chuck Wrench

HHIP 3900-4866 5/16″ Square Head Standard Lathe Chuck Wrench

HHIP 3900-4866 5/16″ Square Head Standard Lathe Chuck Wrench - 5/16″ square head standard lathe chuck wrench ~ made of high quality tool steel. ~ For use on lathe chucks. .

 

Key Lathe Chuck 516 Square

Key, Lathe Chuck, 5/16″ Square

Key, Lathe Chuck, 5/16″ Square - Heavy duty construction. Hardened and tempered. 5/16″ square head lathe chuck key. Made of high quality tool steel.

 

6 3 Jaw Precision Lathe Chuck with MT5 Shank Rotating Triple Ball Bearing

6″ 3 Jaw Precision Lathe Chuck with MT5 Shank (Rotating Triple Ball Bearing)

6″ 3 Jaw Precision Lathe Chuck with MT5 Shank (Rotating Triple Ball Bearing) - Triple ball bearing design. 9685″ (50mm), 6. External jaw clamping range 2. 5906″ (142mm). 7087″ (145mm). Internal jaw jamming range 1. Chuck outside dia. 0004″. Rpm 3,000. Chuck body is made of high quality nodular cast iron suitable for high rotation speed. Accuracy 0. Flimsy parts are specifically engineered by quenching process to enhance durability. 1181″ (3mm) -2. 002″(tested vertical. 2992″ (160mm). Bolt circle dia. Short cylindrical center mounting. About the chuck revolving plate the chuck plate is designed for supporting work pieces during process to be fitted for standard 6″ 3-jaw self centering lathe chuck. Mounting thread (z-d) 3-m8. Max rpm 3,600. Superior gripping force to meet precision machining demands. Accuracy 0. Internal jaw clamping range 0. 5. 1. Morse taper 5 mt. The main body and taper shank are made of high quality carbon steel and hardened for high performance and stability. Chuck body thickness 2-1/2″ (65mm). 6″ (160mm). 1654″ (55mm), 5. About the 6″ 3-jaw self centering lathe chuck high precision self-centering design. 7717″ (45mm). Center thru hole dia. 1654″ (55mm).

 

HHIP 3900-0423 4-Jaw Self-Centering Lathe Chuck Plain 3 Mounting Holes 3

HHIP 3900-0423 4-Jaw Self-Centering Lathe Chuck Plain 3 Mounting Holes, 3″

HHIP 3900-0423 4-Jaw Self-Centering Lathe Chuck Plain 3 Mounting Holes, 3″ - Universal scroll chucks. . Chuck wrench included. 3″ 4-jaw self-centering lathe chuck (plain) 3 mounting holes made of high quality semi-steel. 2 sets of solid jaws included (id &od).

 

PSI CMG3C Mini Grip 4 Jaw Wood Lathe Chuck System

PSI CMG3C Mini Grip 4 Jaw Wood Lathe Chuck System

PSI CMG3C Mini Grip 4 Jaw Wood Lathe Chuck System - Flat jaws to handle bowls up to 5-inch diameter are available (#cjawfj1). Bonus jaws to hold dowels 1-1/2-to-2-3/8-inch to grip internally 2-to-3-inch. Stepped jaws for small dowels 3/8-to-1-1/4-inch to grip internally 1-to-2-1/2-inch. Basic straight jaws for 1-inch stock, square or round. Adapts to both 3/4-inch-by-16 tpi and 1-by-8 tpi spindles, and contains 2 open/close levers.

 

4 4 inch 3 Jaw Precision Self Centering Lathe Chuck with 2 sets jaw

4″ (4 inch) 3 Jaw Precision Self Centering Lathe Chuck with 2 sets jaw

4″ (4 inch) 3 Jaw Precision Self Centering Lathe Chuck with 2 sets jaw - High precision self-centering design. Accuracy 0. Flimsy parts are specifically engineered by quenching process to enhance durability. Superior gripping force to meet precision machining demands. External jaw clamping range 1. Internal jaw jamming range 1. 1811″ (30mm), 3. 1496″ (80mm). Internal jaw clamping range 0. 1811″ (30mm). 5433″ (90mm). 1811″ (30mm), 3. 0787″ (2mm) -1. 002″(tested vertical.

 

Adapter 5 Lathe Chuck

Adapter, 5″ Lathe Chuck

Adapter, 5″ Lathe Chuck - Same jaw fixing system across all nova chuck models, total system interchangeability. 3 step sizes for optimum gripping of bases with minimal crush damage to wood. Special nova dovetail profile, designed to maximum strength and holding in wood turning, without crushing wood fibers. All nova chuck accessory jaws are designed to hold in the expansion and contraction modes. Internal spigot grip for small unsupported or supported spindle work.

 

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System - Includes #3 round jaws, external grip 3-1/16-to-4-3/8-inch. Includes #2 round jaws, for dowels 7/8-to-1-1/2-inch holes 1-1/4-to-2-inch. Includes four (4) self-centering jaw sets to hold round and square stock for turning, pre-threaded for 1x8tpi, and has an adapter for 3/4x16tpi spindles. Includes pin jaws which hold inside holes 1-to-2-1/4-inch, and a screw chuck. Includes #1 step jaws for dowels 3/32-to-1-3/8-inch, holes 11/16-to-2-3/8-inch.

 

PSI Woodworking CUG3418CC Utility Grip 4 Jaw Lathe Chuck System

PSI Woodworking CUG3418CC Utility Grip 4 Jaw Lathe Chuck System

PSI Woodworking CUG3418CC Utility Grip 4 Jaw Lathe Chuck System - Includes #1 step jaws 3/32″ to 1-7/8″ external & 11/32″ to 3-3/8″ internal includes #2 round jaws 1-1/2″ to 3-1/8″ external & 2″ to 3-7/8″ internal. This c series chuck works with all “c” series jaws. Chuck is pre-threaded to 1″ x 8tpi includes 3/4″ x 16tpi adaptor. Heavy duty chrome-plated self-centering chuck will hold your work tight & secure on midi and full size woodworking lathes. Includes screw chuck also includes an allen wrench and a set of tightening levers.

 

South Bend Lathe SB1370 12-Inch by JT33 Drill Chuck

South Bend Lathe SB1370 1/2-Inch by JT33 Drill Chuck

South Bend Lathe SB1370 1/2-Inch by JT33 Drill Chuck - Accurate enough for your lathe or mill. Produced to close tolerances. Durable finish gives years of life to the surfaces.

 

PSI Woodworking TM42 Headstock Mount Lathe Drill Chuck

PSI Woodworking TM42 Headstock Mount Lathe Drill Chuck

PSI Woodworking TM42 Headstock Mount Lathe Drill Chuck - This 1/2″ drill chuck can be mounted directly on the headstock spindle of your lathe. It is perfect for the lathe that does not have a morse taper mount. The precision chuck has a 1/2″ x 20 tpi female thread, and comes with a chuck key, and an adapter to fit a 1″ x 8 tpi spindle. The jaws will open to fit a 1/2″ drill bit.

 

Shars Tool 6 3 Jaw Self Centering Scroll Lathe Chucks 2 Piece Jaws

Shars Tool 6″ 3 Jaw Self Centering Scroll Lathe Chucks 2 Piece Jaws

Shars Tool 6″ 3 Jaw Self Centering Scroll Lathe Chucks 2 Piece Jaws - Semi-steel chuck body made from high quality cast iron three pinion design with each pinion ground and hardened to hrc 43 two piece jaw design with a master jaw and a top reversible jaw in american standard tongue and groove specification both side of jaw teeth and guides are ground and hardened to hrc 58-62 each set of jaws are serialized in their own set a serialized set of jaws are then finished, ground, and lapped on their designated chuck body which will be the same chuck body on the final assembly to achieve a greater accuracy before assembling the jaw to its designated chuck body, the jaw’s finish machining are performed on a closed tolerance state of the art cnc machine from japan scroll plate’s thread flank are ground on both side to achieve a tighter contact with the master jaw each chuck has gone through rigorous accuracy and repeatability inspection with clamping and jamming multiple random testing rods or rings accuracy is maintained for the entire clamping range.