KBI PlatinumXCELL CPVC CTS Water Hammer Arrester Fitting
- Epdm high quality washer insures sure seal. Made in the usa. Rated for hot and cold water plumbing systems to 100 psi @ 180°f. Meets/exceeds astm and ansi standards, as well as nsf standards. Conforms to astm d 2846 specification for chlorinated poly (vinyl chloride) (cpvc) plastic hot and cold water distribution systems.
SharkBite 22632LF 3/4-Inch Residential SharkBite Water Hammer Arrestor
- Certified to 200 psi and 200-degreef. Compact, robust dzr brass body is the foundation of a strong, corrosion resistant, durable fitting. No soldering, clamps, unions or glue required. The sharkbite connection system is an instant push-fit connection that connects copper tubing, cts cpvc and pex pipe in any combination.
Soux Chief 696-2313MF Oxbox Washing Machine Outlet Box with Minister Water Hammer Arresters
- Separate boxes offer flexible layout. Debris covers included to protect boxes from drywall mud and paint. Separates supply and drainage systems into two stud bays. Boxes mount securely to stud or over studs. Durable abs stands up to job site abuse.
Watts 15M2-B 3/4 LF15 Lead-Free Water Hammer Arrestor, 3/4″ – Lead Free
- Quarter-inch turn valves provide easy “on-off” water supply adjustment. Recessed installation eliminates exposed piping. Provides quick, safe water supply and shutoff for washing machines. Npt solid hex brass adapter for easy installation may be installed in concealed locations without access panels and are not rechargeable in the field may be installed in new or existing plumbing systems with a standard pipe tee vertically, horizontally or at any angle factory air charged and permanently capped and solder sealed pdi listed air pre-load is 60psi (422 kpa).
Zurn Wilkins 1250-C 1″ Water Hammer Arrestor
- The water hammer arrester may be installed within a stud bay without the need for an access panel. This excessive pressure surge is absorbed by the pre-charged cushion of air permanently sealed within the water hammer arrester. Designed to protect residential, commercial and industrial water lines during pressure surges following quick valve closure.
LSP OB-211-T Unassembled Outlet Box with CPVC Valve and Water Hammer Arrester, White
- Valves certified to asme 112. Quarter turn ball valve. Patented design provides left, center and right waste options. 18. 1 standard. Durable brass resists corrosion. Knockouts accept either waste or water lines.
PPP SC-1000, 1″ NPT, Threaded Water Hammer Arrestor
- Ca/vt compliant. Ppp sc-1000, 1″ npt, threaded water hammer arrestor features 6-3/4″ length, 1″ npt connection may be installed in new or existing plumbing systems with a standard pipe tee maintenance free, the piston is the only moving part tested in excess of 500 psi tempature range -40f to +212f (-54c to +100c) barrel-fabricated of type “k” hard drawn copper operating pressure designed to operate on all domestic and commercial line pressures. Normal operating pressure 35 to 250 psig. A maintenance-free installation is assured when using this type of arrestor, the only moving part is the free-moving piston furnished with “o” ring seals which have been tested for reliability in excess of normal operating ranges. Spike pressure 1,500 psig. Ppp sc-1000, 1″ npt, threaded water hammer arrestorprecision plumbing productsppp water hammer arrestors are engineered to permit the impact or attaching end to match the internal cross sectional area of piping in which it is to be installed. This design assures that 100% of the surge or shock will be arrested on initial impact. Water hammer arrestors are specified for both commercial and residential uses, for commercial laundrys, restaurants, motels and for dish washers and laundry equipment in the home.
Watts 15M2-C 1″ Water Hammer Arrestor, Height 8-3/16″
- Temp. , Overall width 1-5/8 in. 26, pdiwh201, certification pdi wh201 certified water hammer arrestors control water pressure shock and prevent water hammer conditions. Max. Pressure, preset setting 150 psitemp. , Standards iapmo, asse 1010, ansi a112. , Mip connection, material of construction copper, overall height 8-3/16 in. Range 33° to 180°f. , Overall width 1-5/8 in. 26, pdiwh201, certification pdi wh201 certified, water hammer arrestor, size 1 in. Water hammer arrestor, size 1 in. Max. Pdi wh201 certified. Pressure 150 psi, precharged to 30 psimax. Install in new or existing plumbing systems at any angle. , Standards iapmo, asse 1010, ansi a112. Ideal in dishwashers, clothes washers and quick-closing faucets. , Mip connection, material of construction copper, overall height 8-3/16 in. 180°fcommercialmeet iapmo, asse 1010, ansi a112. 26, pdiwh201.
Ez-Flo 60560LF 1/2″ MIP Water Hammer Arrester
- Ipc compliant, 1/2″ mip. Aa, mini size, 1/2″ male pipe connection. Can be installed in any direction. 250# f maximum working temperature. 250 psig maximum working pressure.
Sioux Chief 660-GTC1 Mini-Rester Water Hammer Arrester
- Used for painting supplies, paint & stains. . The product is manufactured in united states. This item mini-restertm water hammer arrester.
Water Hammer Arrestor, 3/4 In GHT, 150 psi
- Can be mounted in vertical or horizontal installations. Stops pipe banging on fast closing valves. Screws and seals provided for multiple designs. Automatically shuts off water flow to prevent flooding. Threaded inlet adapters not included. Contains two units to convert both hot and colder water inlets. Price for each max pressure 150 psi temp range 33 degrees to 180 degrees f pipe size 3/4″ x 3/4″ x 1/2″ overall height 4-5/16″ body material stainless steel with brass adapter item water hammer arrestor hose adapter factory set pressure 25 to 35 psi connection type ght x ght x npt diameter 1-1/4″ country of origin (subject to change) united states.
Wilkins 1250-B NA WHA Water Hammer Arrestor, 3/4″ MNPT 1250-B
- Designed to protect residential, commercial and industrial water lines during pressure surges following quick valve closure. . The water hammer arrester may be installed within a stud bay without the need for an access panel. This excessive pressure surge is absorbed by the pre-charged cushion of air permanently sealed within the water hammer arrester.
Jay R. Smith 520-T-A Water Hammer Arrestor, Copper, Threaded Connection Type
- . The factory set pressure is 60 with a max pressure of 350 psi, with a temperature range of 33-250 degrees. 6 7/8 inch copper water hammer arrestor, threaded connection type.
Zurn Wilkins 1250XL-B 3/4″ Water Hammer Arrestor
- Weight 100 lb. Size 1/2″,3/4″,1″. Temperature range 33° f to 180°f.
Mini-rester Water Hammer Arrester 3/8″od Stop
- “sioux chief” mini-rester water hammer arrester3/8″od x 3/8″ reverse nut tee for 3/8″ od compression stop valve uses pressurized cushion of air to absorb the pressure spike dual o-ring piston separates the air cushion from the water system to ensure permanent protection from waterlogging stops banging pipes easy to install arresters can be installed vertically, horizontally, or any angle in between carded.
Keeney Manufacturing 2354WHAKIT TimeOut Timer Valve Water Hammer Arrester Kit
- Screws and seals provided for multiple designs. Automatically shuts off water flow to prevent flooding. Washing machine timer valve body. Contains two units to convert both hot and colder water inlets. Threaded inlet adapters not included. Stops pipe banging on fast closing valves. Can be mounted in vertical or horizontal installations.
Zurn Wilkins Z1700-200 Shoktrol Water Hammer Arrestors, 3/4″ Inlet x 3-1/2″ Height
- Shoktrol water hammer arrestor. Round top. 3/4 inch inlet size. Bellow. 3-3/8 inch dia top size.
Hydra Rester B 3/4 Thread 653-B [B] Male Threaded SIOUX CHIEF 653-B HYDRA-RESTER WATER HAMMER ARRESTER 3/4 MALE NPT by Sioux Chief
- Faceplate 10-3/8″ x 8-7/16″. Hydra rester b 3/4 thread 653-b [b] male threaded sioux chief 653-b hydra-rester water hammer arrester 3/4 male npt. Dimensions box 6-1/2″ x 7-5/8″ x 3″.
Water Hammer Arrestor, 1/2 In NPT, Copper
- Plumbingsupplies. Price for each max pressure 150 psi temp range 33 degrees to 180 degrees f pipe size 1/2″ overall height 5-15/16″ body material copper with low-lead brass adapter item water hammer arrestor standards asse1010, ansi a112261m, pdi wh201 factory set pressure 60 psi connection type mnpt diameter 1-1/8″ country of origin (subject to change) south korea. Home. Waterhammerarrestors. Siouxchiefmini-resterwaterhammerarrestors.
Sioux Chief Mfg 660-TC1 3/8-Inch OD Compression Mini Rester Residential Water Hammer Arrester
- 660-tc1 features -hammer arrester. 38″ outside diameter for supply tubes. Specifications -0. -Ideal for in-line pex installation for quick closing faucets. -Compression tee. -Install in-line on ice makers lines, lavatory or dishwasher supply tubes.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
