Best and Coolest 19 Spiral Os

 

Amana Tool 51427 Solid Carbide Spiral O Single Flute Plastic Cutting 38 Dia x 1-58 Cut Height x

Amana Tool 51427 Solid Carbide Spiral ‘O’ Single Flute, Plastic Cutting 3/8 Dia x 1-5/8 Cut Height x

Amana Tool 51427 Solid Carbide Spiral ‘O’ Single Flute, Plastic Cutting 3/8 Dia x 1-5/8 Cut Height x - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Single flute, 21 degree angle. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems.

 

Amana Tool 51441 Solid Carbide Spiral O Single Flute Plastic Cutting 116 Dia x 14 Cut Height x

Amana Tool 51441 Solid Carbide Spiral ‘O’ Single Flute, Plastic Cutting 1/16 Dia x 1/4 Cut Height x

Amana Tool 51441 Solid Carbide Spiral ‘O’ Single Flute, Plastic Cutting 1/16 Dia x 1/4 Cut Height x - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Single flute, 21 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide. Round shanks allow use with a wide variety of toolholding systems.

 

LMT Onsrud 63-602 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 22 Degree Helix 1 Flute 15000 Overall Length 00625 Cutting Diameter 01250 Shank Diameter

LMT Onsrud 63-602 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 1.5000″ Overall Length, 0.0625″ Cutting Diameter, 0.1250″ Shank Diameter

LMT Onsrud 63-602 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 1.5000″ Overall Length, 0.0625″ Cutting Diameter, 0.1250″ Shank Diameter - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. Single flute, 22 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

LMT Onsrud 62-725 Solid Carbide Downcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 25000 Overall Length 02500 Cutting Diameter 02500 Shank Diameter

LMT Onsrud 62-725 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.5000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 62-725 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.5000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter - Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. One flute, 21 degree angle. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Amana Tool 51486 SC Spiral O Single Flute Aluminum Cutting 18 D x 34 CH x 14 SHK x 2-12 Inch Long Up-Cut Router Bit with Mirror Finish

Amana Tool 51486 SC Spiral ‘O’ Single Flute, Aluminum Cutting 1/8 D x 3/4 CH x 1/4 SHK x 2-1/2 Inch Long Up-Cut Router Bit with Mirror Finish

Amana Tool 51486 SC Spiral ‘O’ Single Flute, Aluminum Cutting 1/8 D x 3/4 CH x 1/4 SHK x 2-1/2 Inch Long Up-Cut Router Bit with Mirror Finish - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. Single flute, 21 degree angle.

 

Amana Tool 51476 Solid Carbide Spiral O Single Flute Aluminum Cutting 14 D x 1-12 CH x 14 SHK x 3 Inch Long Up-Cut Router Bit with Mirror Finish

Amana Tool 51476 Solid Carbide Spiral ‘O’ Single Flute, Aluminum Cutting 1/4 D x 1-1/2 CH x 1/4 SHK x 3 Inch Long Up-Cut Router Bit with Mirror Finish

Amana Tool 51476 Solid Carbide Spiral ‘O’ Single Flute, Aluminum Cutting 1/4 D x 1-1/2 CH x 1/4 SHK x 3 Inch Long Up-Cut Router Bit with Mirror Finish - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Solid carbide. Single flute, 22 degree angle.

 

LMT Onsrud 63-774 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 20000 Overall Length 02500 Cutting Diameter 02500 Shank Diameter

LMT Onsrud 63-774 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 63-774 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter - Single flute, 21 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

LMT Onsrud 65-033 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 30000 Overall Length 03750 Cutting Diameter 03750 Shank Diameter

LMT Onsrud 65-033 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter

LMT Onsrud 65-033 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Single flute, 21 degree angle.

 

LMT Onsrud 63-624 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 22 Degree Helix 1 Flute 30000 Overall Length 02500 Cutting Diameter 02500 Shank Diameter

LMT Onsrud 63-624 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 63-624 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter - Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Single flute, 22 degree angle. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

Amana 51505 14Dx14SHK SPIRAL O PLASTIC

Amana 51505 1/4″Dx1/4″SHK SPIRAL O PLASTIC

Amana 51505 1/4″Dx1/4″SHK SPIRAL O PLASTIC - Single flute, 22 degree angle. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

LMT Onsrud 63-701 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 20000 Overall Length 00625 Cutting Diameter 01250 Shank Diameter

LMT Onsrud 63-701 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.0625″ Cutting Diameter, 0.1250″ Shank Diameter

LMT Onsrud 63-701 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.0625″ Cutting Diameter, 0.1250″ Shank Diameter - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. Single flute, 21 degree angle.

 

LMT Onsrud 62-713 Solid Carbide Downcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 20000 Overall Length 01250 Cutting Diameter 01250 Shank Diameter

LMT Onsrud 62-713 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.1250″ Shank Diameter

LMT Onsrud 62-713 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.1250″ Shank Diameter - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. One flute, 21 degree angle. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

LMT Onsrud 52-701 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 22 Degree Helix 2 Flutes 40000 Overall Length 03750 Cutting Diameter 03750 Shank Diameter

LMT Onsrud 52-701 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 4.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter

LMT Onsrud 52-701 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 4.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Double flute, 22 degree angle.

 

Amana 51404 14Dx14SHK SPIRAL O PLASTIC

Amana 51404 1/4″Dx1/4″SHK SPIRAL O PLASTIC

Amana 51404 1/4″Dx1/4″SHK SPIRAL O PLASTIC - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Single flute, 21 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Amana Tool 51402 Solid Carbide Spiral O Single Flute Aluminum Cutting 14 D x 58 CH x 14 SHK x 2 Inch Long Up-Cut Router Bit with Mirror Finish

Amana Tool 51402 Solid Carbide Spiral ‘O’ Single Flute, Aluminum Cutting 1/4 D x 5/8 CH x 1/4 SHK x 2 Inch Long Up-Cut Router Bit with Mirror Finish

Amana Tool 51402 Solid Carbide Spiral ‘O’ Single Flute, Aluminum Cutting 1/4 D x 5/8 CH x 1/4 SHK x 2 Inch Long Up-Cut Router Bit with Mirror Finish - Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Single flute, 22 degree angle.

 

LMT Onsrud 63-775 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 25000 Overall Length 02500 Cutting Diameter 02500 Shank Diameter

LMT Onsrud 63-775 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.5000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 63-775 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.5000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Single flute, 21 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Amana Tool 51474 Solid Sub Micrograin Carbide Spiral O Single Flute Aluminum Cutting 18 Dia x 1

Amana Tool 51474 Solid Sub Micrograin Carbide Spiral ‘O’ Single Flute, Aluminum Cutting 1/8 Dia x 1/

Amana Tool 51474 Solid Sub Micrograin Carbide Spiral ‘O’ Single Flute, Aluminum Cutting 1/8 Dia x 1/ - Single flute, 22 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Solid carbide.

 

LMT Onsrud 62-727 Solid Carbide Downcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 30000 Overall Length 02500 Cutting Diameter 02500 Shank Diameter

LMT Onsrud 62-727 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 62-727 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter - One flute, 21 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

Amana 51502 14Dx14SHK SPIRAL O ALUMINU

Amana 51502 1/4″Dx1/4″SHK SPIRAL O ALUMINU

Amana 51502 1/4″Dx1/4″SHK SPIRAL O ALUMINU - Mirror finish. Maximum rpm 35 000. Solid carbide spiral ‘o’ flute plastic cutting up-cut cnc router bits. To be used only on cnc machines and routers with automatic feeding.