Best and Coolest 18 Combination Drill & Taps

 

M6 X 10 HSS Combination Drill Taps - Metric

M6 X 1.0, HSS Combination Drill & Taps – Metric

M6 X 1.0, HSS Combination Drill & Taps – Metric - M6x10 0255 shk dia x 2-1/2″ oal x 17/32″ drill legh x 02030 drill sz x 25/32″ thread legh, a55803. Hss combination drill & taps, metric.

 

GORCHEN Drill Tap Bit Combination Tool Kit Set Hex Shank Titanium Metric Deburr Countersink Bit HSS M3-M10

GORCHEN Drill Tap Bit Combination Tool Kit Set Hex Shank Titanium Metric Deburr Countersink Bit HSS M3-M10

GORCHEN Drill Tap Bit Combination Tool Kit Set Hex Shank Titanium Metric Deburr Countersink Bit HSS M3-M10 - Size m3 x 05, m4 x 07, m5 x 08, m6 x 1, m8 x 125, m10 x 15. Package one plastic storage case with 6 drill tap bits inside. Feature drill, tap and deburr/countersink in one operation, save time and efficient. Suitable for drilling and tapping in wood, plastic and soft metal like aluminum, copper, etc. Material hardened high speed steel 6542 with titanium coated, ensures durable sharp.

 

In-tool-home Combination Drill and Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 14-20nc Set of 6

In-tool-home Combination Drill and Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6

In-tool-home Combination Drill and Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6 - Made from hardened high-speed steel vs carbon steel for longer life. Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time. Deburr/countersink also provided on bit beyond back taper. Designed to tap up to 10-gauge metal. Back tapered beyond tap to prevent thread damage from over-drilling.

 

DISSTON COMPANY 120030 1132x4-34 High Speed Steel Combination Drill and tap

DISSTON COMPANY 120030 11/32″x4-3/4″ High Speed Steel Combination Drill and tap

DISSTON COMPANY 120030 11/32″x4-3/4″ High Speed Steel Combination Drill and tap - Master mechanic, 11/32″ x 4-3/4″, high speed steel, black oxide drill bit, 135 split point, jobber length, straight shank, 135 point angle with 4 cutting edges which eliminate walking & provide fast penetration, black oxide tempering treatment reduces frictional resistance & improves chip flow, recommended for wood, plastic, wallboard, plywood & soft metals, aluminum, brass & bronze, for occasional use in stainless steel & other hard metals, carded. .

 

Cle-Line C64961 Combination Tap and Drill 10-32 UNF

Cle-Line C64961 Combination Tap and Drill, #10-32 UNF

Cle-Line C64961 Combination Tap and Drill, #10-32 UNF - Drill length dictates thickness of material to be worked. Cle-line combination tap and drill #10-32 unf number of flutes 2. Two flutes run length of the tool. Drill and tap in one operation without changing tools. Hss substrate, bright finish.

 

AngelaKerry Combination Drill and Tap Bit 14 Hex Twist Tap HSS Countersink Screw Hole - Set of 6pcs 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 14-20nc

AngelaKerry Combination Drill and Tap Bit 1/4” Hex Twist Tap HSS Countersink Screw Hole – Set of 6pcs (6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc)

AngelaKerry Combination Drill and Tap Bit 1/4” Hex Twist Tap HSS Countersink Screw Hole – Set of 6pcs (6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc) - 6pcs x hex shank hss drill bit & screw tap of american units. Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency. High hardness, rustproof, solid and durable made from hardened high-speed steel vs carbon steel for longer life. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc. Fast replacement composite cone, uses drill edged principle.

 

GREENLEE DTAP8-32 Combination Drill and Tap Bit 8-32NC - Qty 6

GREENLEE DTAP8-32 Combination Drill and Tap Bit, 8-32NC – Qty 6

GREENLEE DTAP8-32 Combination Drill and Tap Bit, 8-32NC – Qty 6 - Self-centering point, do not need assistant center drilling or center punching. Titanium coated, rust-proof. 6542 high hardness,solid and durable,such as 2mm 304 steel plate. The advantage is opening, tapping, chamfering. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc.

 

Greenlee DTAP8-32 Combination Drill and Tap Bit 8-32NC

Greenlee DTAP8-32 Combination Drill and Tap Bit, 8-32NC

Greenlee DTAP8-32 Combination Drill and Tap Bit, 8-32NC - Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time. Made from hardened high-speed steel vs carbon steel for longer life. Back tapered beyond tap to prevent thread damage from over-drilling. Designed to tap up to 10-gauge metal. Deburr/countersink also provided on bit beyond back taper.

 

Greenlee DTAP12-24 Combination Drill and Tap Bit 12-24NC

Greenlee DTAP12-24 Combination Drill and Tap Bit, 12-24NC

Greenlee DTAP12-24 Combination Drill and Tap Bit, 12-24NC - Designed to tap up to 10-gauge metal. Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Made from hardened high-speed steel vs carbon steel for longer life. Deburr/countersink also provided on bit beyond back taper.

 

GREENLEE DTAP10-32 Combination Drill and Tap Bit 10-32NC - Qty 3

GREENLEE DTAP10-32 Combination Drill and Tap Bit, 10-32NC – Qty 3

GREENLEE DTAP10-32 Combination Drill and Tap Bit, 10-32NC – Qty 3 - Black oxide finish improves lubricity, resists corrosion, and helps prevent buildup. Spiral flutes pull chips back from the tip of the tool and out of the hole to prevent clogging. Modified bottoming chamfer has additional length to reduce chip load, add tool life, and permit higher tapping speeds. Combination drill and tap creates holes and cuts threads in one operation for efficient tooling. For creating and threading through holes.

 

Greenlee DTAPKITM M3-M10 6-Piece Combination Drill and Tap Set

Greenlee DTAPKITM M3-M10 6-Piece Combination Drill and Tap Set

Greenlee DTAPKITM M3-M10 6-Piece Combination Drill and Tap Set - Back tapered beyond tap to prevent thread damage from over-drilling. Designed to tap up to 10-gauge metal. Deburr/countersink also provided on bit beyond back taper. Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time. Made from hardened high-speed steel vs carbon steel for longer life.

 

Greenlee DTAPM10C Combination Drill and Tap Bit M10

Greenlee DTAPM10C Combination Drill and Tap Bit, M10

Greenlee DTAPM10C Combination Drill and Tap Bit, M10 - Made from hardened high-speed steel vs carbon steel for longer life. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time. Designed to tap up to 10-gauge metal.

 

Greenlee DTAPM5C Combination Drill and Tap Bit M5

Greenlee DTAPM5C Combination Drill and Tap Bit, M5

Greenlee DTAPM5C Combination Drill and Tap Bit, M5 - Deburr/countersink also provided on bit beyond back taper. Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time. Designed to tap up to 10-gauge metal. Made from hardened high-speed steel vs carbon steel for longer life. Back tapered beyond tap to prevent thread damage from over-drilling.

 

Greenlee DTAPM6C Combination Drill and Tap Bit M6

Greenlee DTAPM6C Combination Drill and Tap Bit, M6

Greenlee DTAPM6C Combination Drill and Tap Bit, M6 - Made from hardened high-speed steel vs carbon steel for longer life. Designed to tap up to 10-gauge metal. Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time. Deburr/countersink also provided on bit beyond back taper. Back tapered beyond tap to prevent thread damage from over-drilling.

 

GREENLEE DTAP14-20 Combination Drill and Tap Bit 14-20NC - 5 Pack

GREENLEE DTAP1/4-20 Combination Drill and Tap Bit, 1/4-20NC – 5 Pack

GREENLEE DTAP1/4-20 Combination Drill and Tap Bit, 1/4-20NC – 5 Pack - Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and timeback tapered beyond tap toprevent thread damage from over-drillingdeburr/countersink also provided on bit beyond back tapermade from hardened high-speed steel vs. Carbon steel forlonger lifehigh quality hex shank to ensure strong connection to drill chuckdesigned to tap up to 10-gauge metalquick change adaptor included in both metric and standard kitsmaterial high speed steelmaterial thickness up to 10 gamaterial type mild steel, copper, brass, aluminumpoint type split point with web thinningshank 1/4 in quick change hexsize 1/4 inthread per inch 20 tpithread type nc.

 

Greenlee DTAPM3C Combination Drill and Tap Bit M3

Greenlee DTAPM3C Combination Drill and Tap Bit, M3

Greenlee DTAPM3C Combination Drill and Tap Bit, M3 - Back tapered beyond tap to prevent thread damage from over-drilling. Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time. Made from hardened high-speed steel vs carbon steel for longer life. Deburr/countersink also provided on bit beyond back taper. Designed to tap up to 10-gauge metal.

 

Dormer E653 High-Speed Steel Combination Drill and Pipe Tap NPT Uncoated Bright Finish Round Shank With Square End 12-14 Thread Size

Dormer E653 High-Speed Steel Combination Drill and Pipe Tap, NPT, Uncoated (Bright) Finish, Round Shank With Square End, 1/2″-14 Thread Size

Dormer E653 High-Speed Steel Combination Drill and Pipe Tap, NPT, Uncoated (Bright) Finish, Round Shank With Square End, 1/2″-14 Thread Size - Spiral flutes pull chips back from the tip of the tool and out of the hole to prevent clogging. For creating and threading through holes. Combination drill and tap creates holes and cuts threads in one operation for efficient tooling. Npt (national pipe taper) for compatibility with a range of threads. Modified bottoming chamfer has additional length to reduce chip load, add tool life, and permit higher tapping speeds.

 

Greenlee DTAP14-20 Combination DrillTap Bit - 14-20 NC-2PK

Greenlee DTAP1/4-20 Combination Drill/Tap Bit – 1/4-20 NC-2PK

Greenlee DTAP1/4-20 Combination Drill/Tap Bit – 1/4-20 NC-2PK - Npt (national pipe taper) for compatibility with a range of threads. Modified bottoming chamfer has additional length to reduce chip load, add tool life, and permit higher tapping speeds. Combination drill and tap creates holes and cuts threads in one operation for efficient tooling. Drill/tap countersink bits use on mild steel, aluminum, copper, and brass in one step back taper prevents thread damage from over-drilling made of high-speed steel with split-point drill tip 1/4″ shank bright finish. For creating and threading through holes.