Best and Coolest 15 Torque Angles

 

TORQUE ANGLE AND ROTATION CHECKER MEASURING GAUGE METER FOR TORQUE WRENCH TOOL

TORQUE ANGLE AND ROTATION CHECKER MEASURING GAUGE METER FOR TORQUE WRENCH TOOL

TORQUE ANGLE AND ROTATION CHECKER MEASURING GAUGE METER FOR TORQUE WRENCH TOOL - 1/2″ male & female square drive and an adjustable holding rod hold. Measures angle of rotation after pre-torque in torque-angle applications. Measures angle of rotation after pre-torque in torque-angle applications. Torque angle gauge. (Both specific torque & angle settings are required in most late model engines).

 

ABN ½ Inch Drive Torque Angle Gauge Meter Tool

ABN ½ Inch Drive Torque Angle Gauge Meter Tool

ABN ½ Inch Drive Torque Angle Gauge Meter Tool - Â½ Inch drive torque angle gauge meter tool, for servicing late model vehicles which use torque-to-yield fasteners. Easy-to-read gauge clearly identifies degrees to ensure proper tightening. Designed to fit with 1/2″ male and female drives. For use in torque-angle applications to measure angle of rotation after pre-torque. Gauge measures 360° degrees total with clearly marked 2° degree increments.

 

Performance Tool M205 Torque Angle Gauge by Performance Tool

Performance Tool M205 Torque Angle Gauge by Performance Tool

Performance Tool M205 Torque Angle Gauge by Performance Tool - 360 degree angle scale in 2 degree incrementsadjustable arm has 2 different lengths for flexibility of usefor use with 1/2-inch drive tools.

 

GearWrench 85073 38 Flex Head Electronic Torque Wrench with Angle 10-100 inlbs

GearWrench 85073 3/8″ Flex Head Electronic Torque Wrench with Angle 10-100 in/lbs

GearWrench 85073 3/8″ Flex Head Electronic Torque Wrench with Angle 10-100 in/lbs - Digitally tracks torque and angle measurements buzzer with red, yellow, and green lights alerts you when targets are reached. Sealed ratchet head design guards against dirt infiltration knurled aluminum grip resists slipping. Shock-resistant housing provides durability. Backlit lcd screen makes reading torque and angle values quick and easy converts-feet-lbs and nm at the touch of a button. Thin-profile, high-strength teardrop head flexes for easier access and features a 60-tooth gear with 6 degree ratheting arc.

 

Magnetic 12 Torque Protractor Torque Angle Gauge Motor Repair Check Meter

Magnetic 1/2 Torque Protractor Torque Angle Gauge Motor Repair Check Meter

Magnetic 1/2 Torque Protractor Torque Angle Gauge Motor Repair Check Meter - Torque angle gauge. 1/2″ male & female square drive and an adjustable holding rod hold the gauge in position during use. 1/2″ torque angle gauge. 360 degree scale is marked at 2 degree increments & intervals of 10 degree and 30 degree. Measures angle of rotation after pre-torque in torque-angle application.

 

SUPERTOOLS 12 Inch Torque Wrench Angle Gauge TP1136

SUPERTOOLS 1/2 Inch Torque Wrench Angle Gauge TP1136

SUPERTOOLS 1/2 Inch Torque Wrench Angle Gauge TP1136 - 360 degree scale is marked at 2 degree increments & intervals of 10 degree and 30 degree. 1/2″ male & female square drive and an adjustable holding rod hold the gauge in position during use. Measures angle of rotation after pre-torque in torque-angle application. Easily zeroed for next application by turning the tool housing.

 

OTC 4554 12 Drive Torque Angle Gauge Size Glossy Exclusive Paper Model 4554 Tools Hardware store

OTC 4554 1/2 Drive Torque Angle Gauge Size: Glossy Exclusive Paper, Model: 4554, Tools & Hardware store

OTC 4554 1/2 Drive Torque Angle Gauge Size: Glossy Exclusive Paper, Model: 4554, Tools & Hardware store - Has 1/2 male and female square drives. Measures angle of rotation after pre-torque in torque-angle applications. The 360 degree scale is marked in 2 degree increments and intervals of 10 and 30 degrees. Easily zeroed for next application by turning the tool housing. Required when servicing many late model engines that use torque-to-yield fasteners.

 

12 ANGLE METER MEASURER TORQUE ANGLE GAUGE ROTATION

1/2″ ANGLE METER MEASURER TORQUE ANGLE GAUGE ROTATION

1/2″ ANGLE METER MEASURER TORQUE ANGLE GAUGE ROTATION - 1/2″ angle meter measurer torque angle gauge rotation this item features -1/2″ torque angle gauge -measures angle of rotation after pre-torque in torque-angle application -(both specific torque & angle settings are required in most late model engines) -1/2″ male & female square drive and an adjustable holding rod hold the gauge in position during use -360 degree scale is marked at 2 degree increments & intervals of 10 degree and 30 degree -easily zeroed for next application by turning the tool housing.

 

Stanley Proto J6280TA100 38-Inch Drive Digital Torque and Angle Adapter 5-995-Feet Pound

Stanley Proto J6280TA100 3/8-Inch Drive Digital Torque and Angle Adapter, 5-99.5-Feet Pound

Stanley Proto J6280TA100 3/8-Inch Drive Digital Torque and Angle Adapter, 5-99.5-Feet Pound - +/-2° (rotating 90° at speed of 30°/sec) for angle accuracy. Leds for easy viewing of results and audible beep when desired level is reached. Buzzer and led indicator for the 9 pre-settable target torques or angles. Torque and angle tightening with one tool productivity improvement, digital display minimizes reading errors and delivers high precision. +/-3% clockwise or +/-4% counter clockwise for torque accuracy.

 

Florida Pneumatic 727 38 in High Torque Angle Nut Runner

Florida Pneumatic 727 3/8 in. High Torque Angle Nut Runner

Florida Pneumatic 727 3/8 in. High Torque Angle Nut Runner - 180 ft-lb of maximum torque. Latest technology in composite housing increases strength and reduces weight to 43 lb. Ergonomically designed grip and trigger provide ultimate operating comfort. Refined jumbo hammer eliminates excessive vibration and lateral movement. Patent cooling and lubrication systems eliminates overheating and loss of grease in the ratchet head.

 

KT Pro Tools 34387-2AG Digital Torque Angle Wrench

KT Pro Tools 34387-2AG Digital Torque Angle Wrench

KT Pro Tools 34387-2AG Digital Torque Angle Wrench - These wrenches are made from industrial grade durable chrome vanadium steel with high-polished chrome and satin finishes. This new dual scale model has a comfortable rubber handle with quick release and distinct laser marked torque scale. Also as with all king tony america tools and accessories this wrench comes with a limited lifetime warranty. This wrench is designed for easy torque adjustment. Kt pro tools offer various types of wrenches with the quality and hard-working durability you can expect from king tony america.

 

Stanley Proto J6280TA250 12-Inch Drive Digital Torque and Angle Adapter 125-2507-Feet Pound

Stanley Proto J6280TA250 1/2-Inch Drive Digital Torque and Angle Adapter, 12.5-250.7-Feet Pound

Stanley Proto J6280TA250 1/2-Inch Drive Digital Torque and Angle Adapter, 12.5-250.7-Feet Pound - Leds for easy viewing of results and audible beep when desired level is reached. Buzzer and led indicator for the 9 pre-settable target torques or angles. +/-3% clockwise or +/-4% counter clockwise for torque accuracy. +/-2° (rotating 90° at speed of 30°/sec) for angle accuracy. Torque and angle tightening with one tool productivity improvement, digital display minimizes reading errors and delivers high precision.

 

Stanley Proto J6280TA150 12-Inch Drive Digital Torque and Angle Adapter 74-1475-Feet Pound

Stanley Proto J6280TA150 1/2-Inch Drive Digital Torque and Angle Adapter, 7.4-147.5-Feet Pound

Stanley Proto J6280TA150 1/2-Inch Drive Digital Torque and Angle Adapter, 7.4-147.5-Feet Pound - Buzzer and led indicator for the 9 pre-settable target torques or angles. +/-2° (rotating 90° at speed of 30°/sec) for angle accuracy. Torque and angle tightening with one tool productivity improvement, digital display minimizes reading errors and delivers high precision. Leds for easy viewing of results and audible beep when desired level is reached. +/-3% clockwise or +/-4% counter clockwise for torque accuracy.

 

OEMTOOLS 25424 12 Inch Torque Angle Gauge

OEMTOOLS 25424 1/2 Inch Torque Angle Gauge

OEMTOOLS 25424 1/2 Inch Torque Angle Gauge - Designed for professional auto mechanics and heavy duty applications. Easy to read. Calibrated in-degrees. The oem 1/2-inch drive torque angle gauge is used to gauge-degree of turn when manufacturer calls for fasteners to be tightened further after the torque loads are applied.

 

Laser - 5048 Digital Torque Angle Adaptor 12D

Laser – 5048 Digital Torque Angle Adaptor 1/2″D

Laser – 5048 Digital Torque Angle Adaptor 1/2″D - Selectable units of measurement kg-m, nm or lbs-ft. Torque overload alarm. Manufactured from molybdenum. Torque range 40-200nm + or-2%.