Forney 71860 Chop Saw Blade with 5/8-Inch Arbor, Metal Type 1, A36R-BF, 10-Inch-by-1/8-Inch
- A36r-bf with max 6,100 rpm. Designed for metal cutting, metal abrasion, body work, metal fabrication and general repair work. Typical spec example a24r-bf a=used for steel, 24=grit (coarse), r=medium to hard bond. Claims for warranty must be made within 90 days of the date of purchase. 18 mm) with 5/8-inch (15. 10-inch (25. The forney 71860 10-inch type 1 steel cutting wheel is an aluminum oxide metal cutting wheel. 88 mm) arbor. Wheel types type 1=flat wheel for cutting, type 27=depressed center wheel, type 28=hat shaped for grinding and type 29=flap disc for grinding and finishing. 4 cm) by 1/8-inch (3. Coarse grain=short life=fast cutting or grinding. Note harder wheel have a longer life where a softer wheel will cut faster. Designed to be used on chop saws only. The first series of letters indicates grain type a=aluminum oxide (used in metal applications) c=silicon carbide (used for masonry applications) za= alumina zirconium used for (stainless steel and ferrous metal applications) ta=ceramic treated aluminum oxide (used for metal applications) the second series of letters indicates grain size or grit 8-24=coarse, 30-60=medium, 70-180=fine and 220-up=hard. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended. Proof of purchase required. The third series of letters indicates bond hardness a-n=soft, o-s=medium and t-z=hard. The fourth series of letters indicates type of bond bf=retinoid fiberglass reinforced (double bonded), e=shellac, r=rubber and v=vitrified. Used on ferrous materials. Fine grain=long life=slower cutting and grinding.
Norton Chop Saw Blades 14in, 5 Pack, Model# 03970 [Misc.]
- Stationary chop saws, including wel-bilt item#s 1591300 and 15913. Quality norton chop saw blades are engineered to cut metal studs, rebar, angle iron and tubing. 5, wheel thickness in. For use with 14in. 1, max. 14 inch. Rpm 4,365, recommended use metal studs, rebar, angle iron, tubing, wheel diameter in. Wheels qty. 7/64, arbor size in.
Forrest CM08Q606100 Chopmaster 8-1/4-Inch 60 Tooth ATB Miter Saw Blade with 5/8-Inch Arbor
- With new 30° atb tooth style this blade stops totally, all bottom and top splintering on ply veneers on both radial and table saw machines. Saves 1/3 wood loss on each cut. Feeds easily when used for moderate rips and crosscuts on a table saw. Eliminates bottom splintering on radial crosscuts. Reduces “jump in” for better “pull-control”.
DEWALT DW8500 14-Inch by 1-Inch Diamond Edge Chop Saw Blade
- Advanced brazing technology cuts metal with the speed of a conventional abrasive blades. Diamond edge provides 100x the life vs standard dewalt chop saw wheels. Steel blade cores provides constant cutting depth, capcity and stability of a sold core. Exposed diamond matrix allows the blade to cut concrete, plastic, fiberglass, rubbber, non-ferrous metals and other soft materials without loading. Use on the same tool as a conventional blades with similar operating speeds and cutting force.
Oshlun SBFD-14 14-Inch Diamond Chop Saw Blade with 1-Inch Arbor of 20mm Bushing for Stainless and Ferrous Metals
- It can also be used to cut almost everything including plastic, fiberglass, concrete, and rubber. The premium diamond edge will last up to 100 times longer than a standard abrasive chop saw wheel. Our diamond chop saw blade is ideal for cutting all types of metals, including stainless steel, with an abrasive chop saw.
Forrest CM12806115 Chopmaster 12-Inch 80-tooth ATB Miter Saw Blade with 1-Inch Arbor
- Feeds easily when used for moderate rips and crosscuts on a table saw. Reduces “jump in” for better “pull-control”. Eliminates bottom splintering on radial crosscuts. Saves 1/3 wood loss on each cut. With new 30° atb tooth style this blade stops totally, all bottom and top splintering on ply veneers on both radial and table saw machines.
Forney 71895 Chop Saw Blade with 1-Inch Arbor, Masonry Type 1, C20R-BF, 14-Inch-by-1/8-Inch
- 18 mm) with 1-inch (25. Typical spec example a24r-bf a=used for steel, 24=grit (coarse), r=medium to hard bond. Proof of purchase required. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended. The first series of letters indicates grain type a=aluminum oxide (used in metal applications) c=silicon carbide (used for masonry applications) za= alumina zirconium used for (stainless steel and ferrous metal applications) ta=ceramic treated aluminum oxide (used for metal applications) the second series of letters indicates grain size or grit 8-24=coarse, 30-60=medium, 70-180=fine and 220-up=hard. 6 mm) by 1/8-inch (3. The fourth series of letters indicates type of bond bf=retinoid fiberglass reinforced (double bonded), e=shellac, r=rubber and v=vitrified. Coarse grain=short life=fast cutting or grinding. 14-inch (355. Wheel types type 1=flat wheel for cutting, type 27=depressed center wheel, type 28=hat shaped for grinding and type 29=flap disc for grinding and finishing. Claims for warranty must be made within 90 days of the date of purchase. The third series of letters indicates bond hardness a-n=soft, o-s=medium and t-z=hard. The forney 71895-inch type 1 masonry asphalt cutting wheel is silicon carbide and dual fiberglass reinforced. Fine grain=long life=slower cutting and grinding. Note harder wheel have a longer life where a softer wheel will cut faster. Used primarily on ceramic, masonry, plastic and other non-ferrous materials. 4 mm) arbor. Designed to be used on stationary saw machines only. C20r-bf with max 4,365 rpm. Quality made to provide fast, safe, dependable service.
Forney 72355 Chop Saw Blade, Type 1 High Speed Metal with 20-Millimeter Arbor, A24R-BF, 14-Inch-by-5/32-Inch
- 56 cm) by 5/32-inch (3. Proof of purchase required. 787-inch) arbor. 96 mm) with 20 millimeter (. The forney 72355 14-inch type 1 steel cutting wheel is an aluminum oxide metal cutting wheel. Claims for warranty must be made within 90 days of the date of purchase. Fine grain=long life=slower cutting and grinding. Wheel types type 1=flat wheel for cutting, type 27=depressed center wheel, type 28=hat shaped for grinding and type 29=flap disc for grinding and finishing. A24r-bf with max 5,400 rpm’s. Designed for metal cutting, metal abrasion, body work, metal fabrication and general repair work. Note harder wheel have a longer life where a softer wheel will cut faster. The fourth series of letters indicates type of bond bf=retinoid fiberglass reinforced (double bonded), e=shellac, r=rubber and v=vitrified. 14-inch (35. Used on ferrous materials. Coarse grain=short life=fast cutting or grinding. The third series of letters indicates bond hardness a-n=soft, o-s=medium and t-z=hard. The first series of letters indicates grain type a=aluminum oxide (used in metal applications) c=silicon carbide (used for masonry applications) za= alumina zirconium used for (stainless steel and ferrous metal applications) ta=ceramic treated aluminum oxide (used for metal applications) the second series of letters indicates grain size or grit 8-24=coarse, 30-60=medium, 70-180=fine and 220-up=hard. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended. Typical spec example a24r-bf a=used for steel, 24=grit (coarse), r=medium to hard bond. Designed to be used on chop saws and hand held gas saws.
Forrest CM10806105 Chopmaster 10-Inch 80 Tooth ATBR Miter and Radial Saw Blade with 5/8-Inch Arbor
- Double hard and 40% stronger c-4 carbide will give up to 300% longer life between sharpenings. Ends second-step finishing (jointing and sanding not required). Buy and sharpen one blade instead of 3, (24t rip, 50t combination, 80t crosscut). 20° face hook for easy feed. Ends cutting 1/16″ oversize to allow for resurfacing.
14″ x 1/8″ x 1″ Metal CUT-OFF WHEELS chop saw blades – 10 Pack
- All of them are externally reinforced with layers of fiberglass for maximum safety, and can reduce cutting time 50%, require less force and provide vibration-free cutting, no burring to avoid rework. They are specially designed for aggressive removal of materials without loading and very fast stock removal on metal and stainless steel. H&m abrasives-usa’s cut-off wheels are manufactured in accordance with iso 9001 standard.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
