Best 25 Grit Hole Saws for 2020

 

MAGBIT 6255816 MAG625 3-58-Inch Carbide Grit Hole Saw with 1-916-Inch Depth

MAGBIT 625.5816 MAG625 3-5/8-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth

MAGBIT 625.5816 MAG625 3-5/8-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth - Works in rotary and sds hammer mode, works forward and reverse. 1-3/8-inch depth. Use standard or sds shank arbors. Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster. Drilling a hole through concrete block takes less than 7 seconds.

 

5 PCS Diamond Drill Bits Set 25 12 35 34 1 - CBTONE Hollow Core Drill Bits Diamond Coated Grit Hole Saw for Glass Tile Fiberglass Marble and Ceramic 10mm-25mm

5 PCS Diamond Drill Bits Set 2/5″, 1/2″, 3/5″, 3/4″, 1″ – CBTONE Hollow Core Drill Bits Diamond Coated Grit Hole Saw for Glass, Tile, Fiberglass, Marble and Ceramic 10mm-25mm

5 PCS Diamond Drill Bits Set 2/5″, 1/2″, 3/5″, 3/4″, 1″ – CBTONE Hollow Core Drill Bits Diamond Coated Grit Hole Saw for Glass, Tile, Fiberglass, Marble and Ceramic 10mm-25mm - Diamond core drill bits made of steel and nickel coated, durable and have a long service life diamond coated tip maximizes drilling performance and retains a sharp cutting edge after multiple applications. Diamond drill bits tools suitable for drilling glass,tile bottles, blocks jars, fiberglass porcelain tile ceramic, slate mable, granite light stone, etc. Warm notice please add lubricants or water frequently to avoid sparks while using these coated grit hole saw set, can also enhance the working life by doing this. This diamond coated core drill bit removes a complete circle from glass, marble, tiles, granite, ceramic tile bottles and no broken edges. Hole saw diameters 10mm(2/5″), 13mm(1/2″), 16mm(3/5″), 19mm(3/4″), 25mm(1″).

 

Hole Saw Tc Grit 3-14in WArb

Hole Saw Tc Grit 3-1/4in W/Arb

Hole Saw Tc Grit 3-1/4in W/Arb - Tungsten carbide grit hole saw for abrasive construction materials. For use on concrete block, cultured marble, brick, cement board, wood, drywall, pvc, fiberglass, ceramic tile, plastic, plexiglass. Cuts clean holes smoothly in materials without snagging designed to work with any variable speed hand drill. 2-1/4″ cutting depth 3/8″ shank. For the builder, tile setter, homeowner, do-it-yourselfer, construction worker and other professionals.

 

Disston E0206018 4-12-Inch RemGrit Carbide Grit Hole Saws 114mm

Disston E0206018 4-1/2-Inch RemGrit Carbide Grit Hole Saws, 114mm

Disston E0206018 4-1/2-Inch RemGrit Carbide Grit Hole Saws, 114mm - Cuts extremely hard abrasive materials. High heat and abrasion resistance, no teeth to dull or chip, resists snagging and smooth cutting. Cutting edge of tungsten carbide particles bonded to alloy steel back.

 

Starrett KD0212-N 212-Inch Diamond Grit Holesaw

Starrett KD0212-N 2.1/2-Inch Diamond Grit Holesaw

Starrett KD0212-N 2.1/2-Inch Diamond Grit Holesaw - Clean effective cuts and extended life. Uniform synthetic diamond grit bonded over a durable steel platform. Recommended cutting speed is from 150 to 300-rpm. Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials. Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface.

 

Lenox Tools 1211932DGHS 32 Diamond Grit Hole Saw 2-Inch or 508mm

Lenox Tools 1211932DGHS 32 Diamond Grit Hole Saw, 2-Inch or 50.8mm

Lenox Tools 1211932DGHS 32 Diamond Grit Hole Saw, 2-Inch or 50.8mm - Diamond-tip hole saw has a durable, robust design for greater versatility in tough applications. Lenox diamond hole saw has a brazed diamond edge for more holes in tile and stone. Round holes make removing plugs faster and easier. Diamond-tipped hole saw cuts holes in less time than carbide-grit or carbide-tipped hole saws. Uses a 2l, 3l, 6l or 7l standard arbor or a 2l or 6l snap-back arbor.

 

Starrett KD1036-N 1316-Inch Diamond Grit Holesaw

Starrett KD1036-N 13/16-Inch Diamond Grit Holesaw

Starrett KD1036-N 13/16-Inch Diamond Grit Holesaw - Clean effective cuts and extended life. Uniform synthetic diamond grit bonded over a durable steel platform. Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface. Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials. Recommended cutting speed is from 150 to 300-rpm.

 

Hole Saw Tc Grit 4in WArb&Bit

Hole Saw Tc Grit 4in W/Arb&Bit

Hole Saw Tc Grit 4in W/Arb&Bit - Tungsten carbide grit hole saw for abrasive construction materials. For the builder, tile setter, homeowner, do-it-yourselfer, construction worker and other professionals. For use on concrete block, cultured marble, brick, cement board, wood, drywall, pvc, fiberglass, ceramic tile, plastic, plexiglass. Cuts clean holes smoothly in materials without snagging designed to work with any variable speed hand drill. 2-1/4″ cutting depth 3/8″ shank.

 

IVY Classic 26620 1-14 Carbide Grit Edge Hole Saw Kit USA 1Card

IVY Classic 26620 1-1/4″ Carbide Grit Edge Hole Saw Kit, USA, 1/Card

IVY Classic 26620 1-1/4″ Carbide Grit Edge Hole Saw Kit, USA, 1/Card - Slot in hole saw for easy plug removal. Continuous rim of carbide grit ensures smooth cutting. Kit includes carbide grit hole saw, heavy-duty 3/8-inch mandrel and carbide masonry pilot bit. Carbide grit hole saw made in usa, diameter 1-1/4-inch, cutting depth 1-inch. Cuts ceramic tile, marble, slate and fiberglass.

 

eBoot Diamond Drill Bit Coated Grit Hole Saw Set for Tile Granite Glass 38 to 1 Inch 5 Pieces

eBoot Diamond Drill Bit Coated Grit Hole Saw Set for Tile Granite Glass, 3/8 to 1 Inch, 5 Pieces

eBoot Diamond Drill Bit Coated Grit Hole Saw Set for Tile Granite Glass, 3/8 to 1 Inch, 5 Pieces - Steel and nickel coated material these drill coated hole saws are made from steel and nickel coated material, the drill head is covered by diamond particles, sturdy. Warm notice please add lubricants or water frequently to avoid sparks while using these coated grit hole saw set, can also enhance the working life by doing this. Diamond drill sizes diamond drill set includes 5 diameter of 3/ 8, 1/ 2, 5/ 8, 3/ 4, 1 inch, 5 cm and 55 cm in length, good quality diamond drilling tool set. Multiple uses hole saw set can be applied on porcelain, glass, tile, ceramics, stone, granite and other hard surfaces, for most common standard electric drillers. Clean and accurate hole can drill a complete clean and accurate hole from hard surface, no broken edges and no tremor phenomenon, long service life, durable.

 

MAGBIT 6251416 MAG625 78-Inch Carbide Grit Hole Saw with 1-916-Inch Depth

MAGBIT 625.1416 MAG625 7/8-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth

MAGBIT 625.1416 MAG625 7/8-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth - Use standard or sds shank arbors. Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster. Works in rotary and sds hammer mode, works forward and reverse. Drilling a hole through concrete block takes less than 7 seconds. 1-3/8-inch depth.

 

M K Morse  DGM08C Diamond Grit Hole Saw with Attached Arbor 12-Inch

M. K. Morse DGM08C Diamond Grit Hole Saw with Attached Arbor, 1/2-Inch

M. K. Morse DGM08C Diamond Grit Hole Saw with Attached Arbor, 1/2-Inch - They are great for cutting natural stone, porcelain, or masonry products, just to name a few. These hole saws provide longer life and faster cutting in hard to cut materials than conventional carbide grit or carbide tipped hole saws. M. Morse diamond grit hole saws are the ones home owners and contractors want to make their lives easier. K.

 

Lenox Tools 1211416DGDS Diamond Grit Hole Saw DS-16Dg 1 or 254mm

Lenox Tools 1211416DGDS Diamond Grit Hole Saw D/S-16Dg, 1″ or 25.4mm

Lenox Tools 1211416DGDS Diamond Grit Hole Saw D/S-16Dg, 1″ or 25.4mm - Fast and easy cutting. Easy plug removal. Provides more holes in less time. The product is 1″ diamond hole saw. Diamond edge for longer life and speed. The product is manufactured in china. Ideal for cement board, abrasives, tile and stone. Easy to use.

 

MAGBIT 6253816 MAG625 2-38-Inch Carbide Grit Hole Saw with 1-916-Inch Depth

MAGBIT 625.3816 MAG625 2-3/8-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth

MAGBIT 625.3816 MAG625 2-3/8-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth - Works in rotary and sds hammer mode, works forward and reverse. Drilling a hole through concrete block takes less than 7 seconds. 1-3/8-inch depth. Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster. Use standard or sds shank arbors.

 

Bastex Diamond Grit Hole Saw Bit Drill Set 3pc Includes 6mm 8mm 10mm bit Sizes Made for Cutting Ceramic Tile Marble Glass Porcelain and Most Hard Surfaces

Bastex Diamond Grit Hole Saw Bit Drill Set (3pc). Includes 6mm, 8mm, 10mm bit Sizes, Made for Cutting Ceramic Tile Marble Glass Porcelain and Most Hard Surfaces.

Bastex Diamond Grit Hole Saw Bit Drill Set (3pc). Includes 6mm, 8mm, 10mm bit Sizes, Made for Cutting Ceramic Tile Marble Glass Porcelain and Most Hard Surfaces. - Precision all the bits are processed for a smooth and exact finish this type of production leads to a consistent product where every job is done fast, efficient and correct will work with all electric drills cuts clean, perfectly round holes to a depth of approximately 7/8 inches. General usage diamond hole saw bits are versatile drill bits that allow you to cleanly cut glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, granite, light stone and fiberglass most importantly with diamond drill bits you greatly improve the accuracy of the hole than standard bits it is important to note that you must keep your drill bit wet as the friction of the bits and materials build up heat quickly. Quality made from high strength carbon steel makes these drill bits durable and precise steel construction also makes for a longer lasting tools set when you need to drill holes rest assured these bits will be ready nickel-plated with a diamond dust coating offers superior performance and cutting strength. Sizes includes the following diameters, 6mm, 8mm, 10mm for use on wood, porcelain, glass, tile, ceramics, stone, masonry, granite and other hard surfaces. Warranty we are proud of any product that bears our name so we include a 30 day money back guarantee with every item if you don’t like it for any reason, send it back we also include a 1 year replacement warranty.

 

Starrett KD0414-N 414-Inch Diamond Grit Holesaw

Starrett KD0414-N 4.1/4-Inch Diamond Grit Holesaw

Starrett KD0414-N 4.1/4-Inch Diamond Grit Holesaw - Clean effective cuts and extended life. Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface. Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials. Recommended cutting speed is from 150 to 300-rpm. Uniform synthetic diamond grit bonded over a durable steel platform.

 

Lenox Tools 2991212CG Master-Grit Carbide Grit Hole Saw 34-Inch or 19mm

Lenox Tools 2991212CG Master-Grit Carbide Grit Hole Saw, 3/4-Inch or 19mm

Lenox Tools 2991212CG Master-Grit Carbide Grit Hole Saw, 3/4-Inch or 19mm - 3/4-inch diameter. Hole saw has a clean-cutting carbide grit edge that won’t snag or chip when cutting thin materials. Use the hole saw with a 1l or 4l standard arbor. Carbide grit hole saw cuts through a wide range of abrasive materials. 1/2-inch pipe tap.

 

Starrett KD0300-N 3-Inch Diamond Grit Holesaw

Starrett KD0300-N 3-Inch Diamond Grit Holesaw

Starrett KD0300-N 3-Inch Diamond Grit Holesaw - Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials. Recommended cutting speed is from 150 to 300-rpm. Clean effective cuts and extended life. Uniform synthetic diamond grit bonded over a durable steel platform. Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface.

 

Starrett KD0400-N 4-Inch Diamond Grit Holesaw

Starrett KD0400-N 4-Inch Diamond Grit Holesaw

Starrett KD0400-N 4-Inch Diamond Grit Holesaw - Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials. Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface. Uniform synthetic diamond grit bonded over a durable steel platform. Recommended cutting speed is from 150 to 300-rpm. Clean effective cuts and extended life.

 

Starrett KD0112-N 112-Inch Diamond Grit Holesaw

Starrett KD0112-N 1.1/2-Inch Diamond Grit Holesaw

Starrett KD0112-N 1.1/2-Inch Diamond Grit Holesaw - Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials. Uniform synthetic diamond grit bonded over a durable steel platform. Recommended cutting speed is from 150 to 300-rpm. Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface. Clean effective cuts and extended life.

 

MAGBIT 6256416 MAG625 4-Inch Carbide Grit Hole Saw with 1-916-Inch Depth

MAGBIT 625.6416 MAG625 4-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth

MAGBIT 625.6416 MAG625 4-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth - Use standard or sds shank arbors. Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster. Drilling a hole through concrete block takes less than 7 seconds. 1-3/8-inch depth. Works in rotary and sds hammer mode, works forward and reverse.

 

LDEXIN Diamond Grit Hole Saw Drill Bit for Granite and Marble Golden Diamond Saw Hole 35mm  138inch

LDEXIN Diamond Grit Hole Saw Drill Bit for Granite and Marble Golden Diamond Saw Hole 35mm / 1.38inch

LDEXIN Diamond Grit Hole Saw Drill Bit for Granite and Marble Golden Diamond Saw Hole 35mm / 1.38inch - &#X1f4ab【better use advice】dry use,also can be used with water which will help to increase the performance45 degree angle drill positioning before using, and then drilled vertically the rotation speed is about 800~4000 rpm. &#X1f4ab【drill speed】reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably. &#X1f4ab【sharp and smooth cut】coated with high quality diamond, the diamond hole saw creates a high precision, smooth cut,less chipping and minimizing any breakage. &#X1f4ab【super material 】these diamond drill bits made of vacuum brazed diamond,that is durable and have a long sevice life,which are high quality and good performance that excellent for making clean and accurate hole. &#x1f4ab【ideal application】this diamond coated core drill bit removes a complete circle from glass, marble, tiles,granite, ceramic or otherthey are perfect for drill glass, tile bottles,blocks jars, fiberglass porcelain tile ceramic, slate mable, granite light stone.

 

MAGBIT 6253216 MAG625 2-Inch Carbide Grit Hole Saw with 1-916-Inch Depth

MAGBIT 625.3216 MAG625 2-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth

MAGBIT 625.3216 MAG625 2-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth - Drilling a hole through concrete block takes less than 7 seconds. Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster. Works in rotary and sds hammer mode, works forward and reverse. Use standard or sds shank arbors. 1-3/8-inch depth.

 

Exchange-a-Blade 2055004 Stay Sharp 1-Inch 24mm Diamond Grit Hole Saw

Exchange-a-Blade 2055004 Stay Sharp 1-Inch (24mm) Diamond Grit Hole Saw

Exchange-a-Blade 2055004 Stay Sharp 1-Inch (24mm) Diamond Grit Hole Saw - Drill clean, accurate holes in ceramic, marble, glass, fiberglass and hardier-plank. High grade diamonds ensure long life. Measures 1 inches diameter. Includes drilling template wet cutting only. For use with handheld or press drills.

 

Disston E0104581 2-Inch RemGrit Carbide Grit Arbored Hole Saws 51mm

Disston E0104581 2-Inch RemGrit Carbide Grit Arbored Hole Saws 51mm

Disston E0104581 2-Inch RemGrit Carbide Grit Arbored Hole Saws 51mm - Easy to use. The product is manufactured in china. The product is 2″ 1pc hole saw. Cuts extremely hard abrasive materials. Cutting edge of tungsten carbide particles bonded to alloy steel back. High heat and abrasion resistance, no teeth to dull or chip, resists snagging and smooth cutting.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.