Best 22 Drill Bit Extensions

 

Speedbor 88601 Drill Bit Extensions - High quality- katzco’s drill bit extension holder are made with a super high quality heavy duty construction to ensure maximum efficiency the chrome finish of these drill bit holders give an added resistance to rust. Not for use with quick change woodboring bits. 3 pack, katzco drill bit holders come in a pack of three(3) extension holders in 3 different sizes so you can get superior access to hard to reach screws, nuts, and fasteners extension lengths come in the following 2 inch, 4 inch, and 6 inch extensions. Magnetic- katzco’s drill bit holder extension set is made with extra strong permanent magnets to hold bits securely in place ensuring you that your bits stay in place and never wobble while in use, giving you maximum control and accuracy when drilling and driving. Durable- hardened tempered tool steel with chrome-finish holders shock-resistant tool steel for maximum durability these bits will stay secure and never strip or break the heavy-duty construction allows for long life of these extensions.

 

Bosch Daredevil PSBE1012 12-Inch Drill Bit Extension - Hex shank power groove to reduce slippage. Provides a cleaner hole quality with reduced breakout. Spur and reamer tips for cleaner holes. 1/4-inch hex drive extension for bosch spade bits. Features a full cone threaded tip for fast and effortless drilling. Used for power tool accessories, drill bits & accessories. The product is manufactured in china. The item is bosch daredevil dsbe1012 12-inch drill bit extension.

 

4′ X 1/4in Drill Bit Extension 3/16in - Model ext716labor saving devices ext series of drill bit extensions are designed for a variety of unique drilling situations. Dimensions 1/4″ x 4′. The ext series enables the installer to drill through top and bottom plates and multiple fire blocks from the same entry point, making a two story (or beyond) retrofit installation quick and easy. These extensions are designed to handle the most common shank sizes of flexible drill bits used in wire installation. (note as with any long bit drilling situation, where the bit can be unwieldy, we also recommend the at-7 drill bit directional tool for stability and control. Features use with 3/16″ shaft drill bits great for multi-floor drilling. Simply determine the length of extension needed for the operation, determine the shank size of the drill bit (the end that chucks into your drill), tighten the set screws to secure the bit to the extension, and you’re ready to go. They are designed to handle high torque loads, yet still allow needed flexibility for better control.

 

KKmoon 2pcs/set 1/4″ Hex Shank Handle Telescoping Screwdriver Bit Holder Handy Screw Bit Holder Extension Guide Rod Hex Bit Drill Chuck - Built-in strong magnet for good holding power, accepts all 1/4″ standard hexagon shank bits. Quick and easy screwdriver bit change. Non-slip rubber sleeve at socket head. Telescoping bit holder, which works well if you need the extra length to reach. Barrel-shaped guide sleeve helps users drill without touching screw.

 

Socket Bit Hex Shank Adapter Drill Nut Driver Power Extension Bar 3pc Set 1/4″ 3/8″ 1/2″ for Automotive,DYI and Home Repair Tool Kits by Bastex - Purpose this adapter set is designed to provide a securely locked in extension to your existing tool provides additional length to reach into a multitude of hard to reach spaces the spring ball lock ensures a tight fit into the driver head to prevent slipping during use specifically machined to fit securely into a hand held driver, drill driver or impact wrench. Durability quality is a guarantee with this 3 piece sturdy and durable solid steel set designed to withstand torque compression under most standard use situations the exterior anti-weathering coating provides extra protection from damage against elements and substances such as oil and fluids that may come in contact with the extension bars during use with repairs such as in the automotive field. Warranty we believe in our products there for we offer a 30 day money back guarantee along with a 12 month replacement warranty for this high quality product. General usage this 3 piece hex shank bit driver extension bar set is designed to meet a variety of needs fits snugly and securely in your drill chuck or hand held driver consisting of your most common bit sizes 1/4″, 3/8″, and 1/3″ changing shank sizes provides versatility and convenience no matter which tool you chose to use great for the dyi,automotive repairs,household maintenance, and most general repairs a great tool addition to any tool box set.

 

Flexible Extension Bit Holder – Gethome Quick Change Screwdriver Drill Bit Holder Shaft Connecting Link for Electronic Drill Connection - Shank dia64mm / 1/4″ ,total length300mm / 12″. Length about 295mm(116 inches). Bends,twist and turns to use drill into tight and confined spaces. Plastic and metal material, durable and portable, flexible out shield protects your hand while inside shaft rotates. All our product will test before sending out, once customer unhappy with it, just send back and get your money,now click”add to cart” to get your new flexible extension bit holder.

 

Lenox 30925-VBX8 Vari-Bit 8-Inch Step Drill Bit Extension with 3/8-Inch Shank - Long tool life steam oxide coating adds durability. 1 per clam lenox vbx8 features accurate, burr-free holes patented two flute design cuts fast, clean, round holes. Lenox vbx8 specifications extension 8″. Enhanced flute design removes chips rapidly, ensuring longer tool life. Starts on contact split point design for faster penetration and less walking. Fits 3/8″ drill chuck larger.

 

Vitoki 105 Degrees Angle 1/4 6mm Extension Hex Drill Bit Screwdriver Socket Holder Adaptors - Fits 1/4″ 635mm hex drill bit screwdriver. Durable, lasting to use. Easy, lightweight , fast , connect to the standard hex screwdrier. Material stainless steel,size 59 x 3cm,net weight 951g. It’s good for the wrench , can be connected to drill , rechargeable drill or manual wrench.

 

Stalwart 75-PS82 Hawk Quick Release Drill Bit Extensions, 2-Pc. - -Accepts all standard. 36 and 5. 9 inch extensions. 25 inch hexagon driver bits. 75-ps82 features -built in magnet. Includes -set includes 2. Warranty -manufacturer provides 60 day warranty. Construction -hardened steel construction.

 

6′ X 3/16in Drill Bit Extension 3/16in - Model ext516labor saving devices ext series of drill bit extensions are designed for a variety of unique drilling situations. Features use with 3/16″ shaft drill bits great for multi-floor drilling dimensions 3/16″ x 6′. Simply determine the length of extension needed for the operation, determine the shank size of the drill bit (the end that chucks into your drill), tighten the set screws to secure the bit to the extension, and you’re ready to go. (Note as with any long bit drilling situation, where the bit can be unwieldy, we also recommend the at-7 drill bit directional tool for stability and control. They are designed to handle high torque loads, yet still allow needed flexibility for better control. The ext series enables the installer to drill through top and bottom plates and multiple fire blocks from the same entry point, making a two story (or beyond) retrofit installation quick and easy. These extensions are designed to handle the most common shank sizes of flexible drill bits used in wire installation.

 

Eagle Tool US ETHX25054 Installer Bit and Drill Bit Extension, 1/4″ x 54″ - Custom slip resistant nylon patch set screws. Three flat non-slip grip on the chuck end. Internal hex for attaching 1/4 hex shank in drill bits. Made in usa. Add a quick switch hex to adapt to a quick change chuck part number ethxkit250.

 

4′ X 3/16in Drill Bit Extension 1/4in - Simply determine the length of extension needed for the operation, determine the shank size of the drill bit (the end that chucks into your drill), tighten the set screws to secure the bit to the extension, and you’re ready to go. They are designed to handle high torque loads, yet still allow needed flexibility for better control. Features use with 1/4″ shaft drill bits great for multi-floor drilling dimensions 3/16″ x 4′. Model ext524labor saving devices ext series of drill bit extensions are designed for a variety of unique drilling situations. These extensions are designed to handle the most common shank sizes of flexible drill bits used in wire installation. The ext series enables the installer to drill through top and bottom plates and multiple fire blocks from the same entry point, making a two story (or beyond) retrofit installation quick and easy. (Note as with any long bit drilling situation, where the bit can be unwieldy, we also recommend the at-7 drill bit directional tool for stability and control.

 

Drill Bit Extension Set Threaded Tool Power Drill Accessory Drill Extension Drill Set Tight Fit Tools 00120 - Extension set consists of chucking spud 3″ & 6″ threaded extensions 9″ chucking extension. Drill bit extensions thread together 6″ extension threads into 9″ chucking extension for 15″ length. Drill bit extension set has male and female thread size of 1/4-28. 1 year warranty all items ship usps proudly american made. Drill extension set is black oxided to prevent corrosion and enhance appearance.

 

Drill Warehouse 10 Piece Magnetic Extension Socket Drill Bit Holder 1/4″ Hex Power Tools - Must-have accessory set for power drills and impact drivers. Unlimited uses in automotive, hardware, hobby, home, etc. Great for working with hard to reach screws. Designed for 1/4″ hex shank bits. Strong magnet holds bits securely, and the magnet is located inside the chrome tube.

 

Vermont American 17103 6-Inch Standard Drill Bit Extension - Product type -screwdriver bits. Dimensions overall product weight -0. Use -drill bits. -Fully-hardened and tempered for long life. 17103 features -for deep holes and hard-to-reach areas. 19 pounds. -1/4” shank fits any drill. Use material -metal. -Carded. Unit material -steel.

 

McKay 3 Pc Magnetic 1/4″ Diameter Hex Shank Bit Extensions Set AKA Magnetic Socket Nut Drive Holder: Hex Shank Chucks Firmly into most Power Tools, Drills & Screw Drivers - Easily clicks into most power tool shanks or hex screwdriver extensions easily attaches into most hex hole screwdriver or power tool shanks like dewalt and connect magnetically to any hex bit. Variety sizes, multifunction, 3 pc tool set 3 pc assorted sizes so you always have the right size handy when needed 2″, 4″ & 6″ length size included. Intended uses our bit holder extensions set is a must-have tool accessory set, connects to most power drills and impact drivers securly great for working with hard to reach screws the socket ends with a magnetic piece that securily attaches onto any hex bit. Sturdy hardened & tempered construction made with high grade s2 steel with chrome-finish holders material for a long lasting endurance hardened core for extra strength and reduced breakage heat-treated to guarantee bit hardness that stands up to any job manufacturer’s lifetime warranty. Identical match for most standard hex bits all the other variations on this page are an exact match to this extension feel free to order this extension along with any of our other bit sets attachments.

 

Kawasaki 841626 12-Inch Spade Drill Bit Extension - All power tools are tested by independent 3rd party laboratories and are certified by ul, cul, and/or csa. For over 50 years, kawasaki has brought consumers the highest level of fun and adventure with products that deliver unbridled power and excitement. Kawasaki power tools are designed, built and tested to ensure they meet rigorous performance and durability standards.

 

Pack of 3 Socket Bit Socket Adapter Impact Driver Drill Power Extension Bar Hex Shank 1/4″ 1/2″ 3/8″ - This set is perfect for your impact driver or drill, and allows you to replace your ratchet with a power tool. Suitable for quick change 1/4″ chuck systems or directly into drill chuck. Change your hand socket set into a driven socket set. Spring loaded ball bearing on head holds sockets securely. Chrome vanadium steel suitable for heavy duty impact drivers.

 

Tonsiki 8pcs Socket Bit Adapter Hex Drill Driver Power Extension Bar Wrench Extension - Material chrome vanadium steel. Suitable for quick change 1/4″ chuck systems or directly into drill chuck. Handy for fast driving of nuts, bolts and fixings, etc. Spring loaded ball bearing on head holds sockets securely. Suitable for a screwdriver or electric screwdriver handle tools (hexagonal hole or three-jaw chuck can) drive sleeve and after use can be installed on the size of the original hexagonal polygons converted to square head size, which can be used to install the sleeve is a good accessory to convert.

 

Eagle Tool US ETHX25036 Eagle Tool US|ETHX25036|Installer Bit And Drill Bit Extension|1/4 Inch X 36 Inch - Three flat non-slip grip on the chuck end. Internal hex for attaching 1/4 hex shank in drill bits. Made in the usa. Add a quick switch hex to adapt to a quick change chuck part number ethxkit250. Custom slip resistant nylon patch set screws.

 

XCSOURCE 1/4″ 3/8″ 1/2″ Extension Drill Bit Bar Hex Socket Power Driver Shank Adapter Set 5cm BI051 - This set is perfect for your impact driver or drill, and allows you to replace your ratchet with a power tool. Chrome vanadium steel suitable for heavy duty impact drivers. Change your hand socket set into a driven socket set. Suitable for quick change 1/4″ chuck systems or directly into drill chuck. Spring loaded ball bearing on head holds sockets securely.

 

WORTOOL – 10 Piece 60mm Magnetic Extension Socket Drill Bit Holder 1/4″ Hex Power Tools. - Unlimited uses in automotive, hardware, hobby, home, etc. Streng magnet holds bits securely, and the magnet is located inside the chrome tube. Designed for 1/4″ hex shank bits. Must-have accessory set for power drills and impact drivers. Great for working with hard to reach screws.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.