J.W. Winco 187.4-40-48-A-NI Serrated Locking Plate, GN187.4-NI, 40 mm OD with 48 Teeth with M8 x 1.25 Tapped Hole in The Center and Two 6.3 mm Counterbored Holes for Socket Cap Screws, Sintered Stainless Steel, European Standard No.10.4404 (American Stand
- 4-ni serrated locking plates, standard components can be interlocked and firmly set at a defined angle. The range of options makes these plates adaptable for almost any application. With the aid of gn 187. .
MAG-MATE GT1000R Rare Earth Magnetic Separation Rod with 1/4-20 Tapped Holes, 1 x 10″
- . Ideal for custom installations that require magnetic separation but lack space or build your own grate assembly. Used to capture inch fine particle” separation such as metal fillings, shavings, metal wear residue, work hardened stainless steel, etc. For applications to purify products as well as equipment protection. Extremely powerful rare earth magnetic material inside a stainless steel tube designed to capture ferrous metal from dry particulates. Magnetic grate tube/rod comes with 1/4-d tapped mount holes in the end plugs. 1″ diameter tubes by 10 inch long.
MAG-MATE GT1200C Ceramic Magnetic Separation Rod with 1/4-20 Tapped Holes, 1 x 12″
- The kind of metal that could cause damage to processing equipment. Ideal for custom installations that require magnetic separation but lack space or build your own grate assembly. Used to capture small to larger ferrous particle separation such as nails, bolts, washers, etc. 1″ diameter tubes by 12″ long. Powerful ceramic magnetic material inside a stainless steel tube designed to capture ferrous metal from dry particulates. Magnetic grate tube/rod comes with 1/4-20 tapped mount holes in the end plugs.
J.W. Winco 187.4-32-48-A-NI Serrated Locking Plate, GN187.4-NI, 32 mm OD with 48 Teeth with M6 x 1.0 Tapped Hole in The Center and Two 5.3 mm Counterbored Holes for Socket Cap Screws, Sintered Stainless Steel, European Standard No.10.4404 (American Standa
- 4-ni serrated locking plates, standard components can be interlocked and firmly set at a defined angle. The range of options makes these plates adaptable for almost any application. With the aid of gn 187.
MAG-MATE GT1000C Ceramic Magnetic Separation Rod with 1/4-20 Tapped Holes, 1 x 10″
- 1″ diameter tubes by 10″ long. Magnetic grate tube/rod comes with 1/4-20 tapped mount holes in the end plugs. Used to capture small to larger ferrous particle separation such as nails, bolts, washers, etc. The kind of metal that could cause damage to processing equipment. . Powerful ceramic magnetic material inside a stainless steel tube designed to capture ferrous metal from dry particulates. Ideal for custom installations that require magnetic separation but lack space or build your own grate assembly.
Steel Tapped-Hole U-Style Clip-On Nut, Plain Finish, Metric, M6-1 Thread Size, For 0.8 mm-4 mm Material Thickness, 12 mm Edge Distance (Pack of 25)
- Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold. Steel is often used in applications where strength is the primary consideration. Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut. Clip is u-shaped for a secure hold on both sides of the panel when screwing down. Plain surface has no.
Steel Tapped-Hole U-Style Clip-On Nut, Plain Finish, 1/4″-20 Thread Size, For 0.025″-0.15″ Material Thickness, 0.531″ Edge Distance (Pack of 25)
- Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold. Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut. Steel is often used in applications where strength is the primary consideration. Clip is u-shaped for a secure hold on both sides of the panel when screwing down. Plain surface has no.
Steel Tapped-Hole U-Style Clip-On Nut, Plain Finish, #10-24 Thread Size, For 0.025″-0.125″ Material Thickness, 0.468″ Edge Distance (Pack of 25)
- Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold. Plain surface has no. Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut. Steel is often used in applications where strength is the primary consideration. Clip is u-shaped for a secure hold on both sides of the panel when screwing down.
Racks & Rack Cabinet Accessories Adapter plate Pkg/2 84 tapped holes
- Manufacturer vector product category racks & rack cabinet accessories rohs product rack accessories. M8 x 125 tapped hole in the center and two 63 mm counter bored holes for socket cap screws. 115 mm height. 3 holes 1/2″.
Genuine OEM Branson Ultrasonic 3/4” Extender with Tapped Hole, Length 10”, Tuned to 20 KHz.
- This part is fully compatible with branson, telsonic, sonics and materials, misonix,and dukane etc machinery. Material high grade titanium alloy ti-6al-4v this gives the product excellent acoustical characteristics at ultrasound frequencies, high tensile strength, high resistance to corrosion and cavity erosion. All ultrasonic extenders are tested and tuned to specifications. Proudly made in usa.
Square D 9007M Limit Switch, Z Contact Form, Booted Top Push Plunger, 10A Silver Contacts, 6-ft. Cable, Gray #18-4 SJTO Cable, Tapped Holes in Top
- Miniature potted limit switch with nema enclosure has a 10a silver z contact form and compact 39 mm metal body for tight spaces. Cable is gray #18-4 sjto, and housing has tapped holes in top. Includes 6-ft conductor cable. Booted top push plunger for actuation.
LH0498 HH 726-W-3 fluorescent lamp holder with tapped hole bracket
- 660w-600v. Polycarbonate. Bracket with tapped hole.
J.W. Winco 187.4-40-60-A-NI Serrated Locking Plate, GN187.4-NI, 40 mm OD with 60 Teeth with M8 x 1.25 Tapped Hole in The Center and Two 6.3 mm Counterbored Holes for Socket Cap Screws, Sintered Stainless Steel, European Standard No.10.4404 (American Stand
- With the aid of gn 187. The range of options makes these plates adaptable for almost any application. 4-ni serrated locking plates, standard components can be interlocked and firmly set at a defined angle.
MAG-MATE GT1200R Rare Earth Magnetic Separation Rod with 1/4-20 Tapped Holes, 1 x 12″
- 1″ diameter tubes by 12 inch long. Ideal for custom installations that require magnetic separation but lack space or build your own grate assembly. Magnetic grate tube/rod comes with 1/4-d tapped mount holes in the end plugs. For applications to purify products as well as equipment protection. Extremely powerful rare earth magnetic material inside a stainless steel tube designed to capture ferrous metal from dry particulates. Used to capture inch fine particle” separation such as metal fillings, shavings, metal wear residue, work hardened stainless steel, etc.
Genuine Unistrut P1723-EG 2 Hole 90 Degree Angle with 1) 5/16″-18 Thread Tapped Hole and 1) 9/16″ Diameter Hole Connector Bracket for All 1-5/8″ Strut Channel
- For use with 1) 1/2″ bolt in all 1-5/8″ series strut channels. Genuine unistrut brand. 2 hole ninety degree single tapped angle fitting. Finish electro-galvanized astm b633, type iii. One 5/16″-18 tapped hole and one 9/16″ diameter hole thickness 1/4″ (6mm).
MAG-MATE GT0800C Ceramic Magnetic Separation Rod with 1/4-20 Tapped Holes, 1 x 8″
- 1″ diameter tubes by 8″ long. Magnetic grate tube/rod comes with 1/4-20 tapped mount holes in the end plugs. Powerful ceramic magnetic material inside a stainless steel tube designed to capture ferrous metal from dry particulates. Used to capture small to larger ferrous particle separation such as nails, bolts, washers, etc. The kind of metal that could cause damage to processing equipment. Ideal for custom installations that require magnetic separation but lack space or build your own grate assembly.
MAG-MATE GT0800R Rare Earth Magnetic Separation Rod with 1/4-20 Tapped Holes, 1 x 8″
- Ideal for custom installations that require magnetic separation but lack space or build your own grate assembly. 1″ diameter tubes by 8 inch long. For applications to purify products as well as equipment protection. Extremely powerful rare earth magnetic material inside a stainless steel tube designed to capture ferrous metal from dry particulates. Magnetic grate tube/rod comes with 1/4-d tapped mount holes in the end plugs. Used to capture inch fine particle” separation such as metal fillings, shavings, metal wear residue, work hardened stainless steel, etc.
Steel Tapped-Hole U-Style Clip-On Nut, Plain Finish, Metric, M6-1 Thread Size, For 3.4 mm-6.3 mm Material Thickness, 13.5 mm Edge Distance (Pack of 25)
- Clip is u-shaped for a secure hold on both sides of the panel when screwing down. Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold. Plain surface has no. Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut. Steel is often used in applications where strength is the primary consideration.
Hubbell-Raco 973 Box Accessories with Ground Screw and Slotted Head for 10-32 Tapped Hole, 3/8-Inch
- Suitable for 10-32 threaded hole. The screws feature a slotted head design. The screws have a 3/8 in length. Green dye finish provides easy identification. The product is ul listed for your safety and peace of mind.
Thomas & Betts DSS-3-BR Red Dot D-Pak Dry-Tite Round Lampholder Cover with Three Tapped Hole, Bronze
- Spacious, accessible wiring chamber that provides a convenient location to maintain or change a system, pull conductors and make splices. Rohs compliant. Includes inside heat resistant gasket, 1/2-inch plug, and ground screw. Dry-tite boxes and covers protect wiring devices, switches, electronic components and terminal blocks in dry, damp and wet locations. Precision npt threads allow trouble-free field installation for rigid, imc or emt conduit.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
