Best 19 Corner Radius End Mills

 

Kodiak Cutting Tools KCT153503 USA Made Solid Carbide 0.015″ Corner Radius End Mill with 1/2″ Shank Diameter, 4 Flute, 2″ Length of Cut, 4″ Overall Length - 015 carbide, corner radius. 1/2 inch diameter solid carbide end mill, with radius 1/2″ shank 2″ length of cut 4″ overall length 4 flute radius-0. .

 

Niagara Cutter N85610-060 Carbide Corner Radius End Mill, TiAlN Finish, Roughing and Finishing Cutting, 30-Degree Helix, 4-Flute, 3″ OAL, 0.500″ Cut Diameter, 0.500″ Shank Diameter, 0.06″ Radius - Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than tin and ticn coatings. Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life. Four flutes produce a better finish than fewer flutes.

 

Niagara Cutter N18632 Carbide Corner Radius End Mill, Long Length/Reach, Uncoated Finish, Roughing/Finishing Cut, 35-Degree, 3-Flute, 4″ OAL, 0.313″ Cut Diameter, 0.3125″ Shank Diameter, 0.02″ Radius - Extended-reach neck style provides access to recessed areas of the workpiece. 35-degree helix angle provides increased cutting action and chip evacuation compared to lower helix angles for machining stainless steel and titanium. Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications.

 

Sandvik Coromant R216.T4 Carbide Corner Radius End Mill, Metric, TiAlN Monolayer Finish, 30 Deg Helix, 4 Flutes, 73mm Overall Length, 12mm Cutting Diameter, 12mm Shank Diameter, 1mm Corner Radius - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Straight 9° to 12° general purpose 60% core diameter. Shank style. Geometry n. Gauge length 1102. Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant (“dry machining”). Round shanks allow use with a wide variety of toolholding systems.

 

Melin Tool AMG Carbide Corner Radius End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 2 Flutes, 2.5000″ Overall Length, 0.2500″ Cutting Diameter, 0.25″ Shank Diameter, 0.045″ Corner Radius - Aluminum titanium nitride (altin) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than tin, tialn, and ticn coatings. Suitable for general-purpose machining on most medium-hardness materials, including steel and iron. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.

 

Niagara Cutter N68646 Carbide Corner Radius End Mill, Inch, AlCrN Finish, Roughing and Finishing Cut, 5 Flutes, 2.5″ Overall Length, 0.250″ Cutting Diameter, 0.250″ Shank Diameter, 0.045″ Corner Radius - Five flutes produce a better finish than fewer flutes and allow for higher feed rates compared to the four-flute stabilizer, depending on the type of material being milled and the cutting depth. Aluminum chromium nitride (alcrn) coating provides good hardness and better resistance to chemical breakdown in high-heat applications than tialn, ticn, and tin coatings. The combination of stabilizer flute geometry, carbide substrate, and alcrn coating make this end mill suitable for use on hard materials such as steels, stainless steels, and high-temperature alloys. Stabilizer flute design uses unequal spacing and variable helix angles to minimize tool vibration and remove up to three times more chips per minute than conventional carbide end mills. Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.

 

Kodiak Cutting Tools KCT154614 USA Made Solid Carbide 0.045″ Corner Radius End Mill with 1/4″ Shank Diameter, 4 Flute, 1-1/2″ Length of Cut, 4″ Overall Length - 045 carbide, corner radius. 1/4 inch diameter solid carbide end mill, with radius 1/4″ shank 1-1/2″ length of cut 4″ overall length 4 flute radius-0.

 

Niagara Cutter N18650 Carbide Corner Radius End Mill, Long Length/Reach, AlTiN Finish, Roughing/Finishing Cut, 35-Degree, 3-Flute, 4″ OAL, 0.375″ Cut Diameter, 0.375″ Shank Diameter, 0.02″ Radius - 35-degree helix angle provides increased cutting action and chip evacuation compared to lower helix angles for machining stainless steel and titanium. Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications. Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life. Extended-reach neck style provides access to recessed areas of the workpiece. Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than tin and ticn coatings.

 

Niagara Cutter N61813 Carbide Corner Radius End Mill, TiAlN Finish, Finishing Cut, 35 Degree Helix, 3 Flutes, 2.5″ Overall Length, 0.281″ Cut Diameter, 0.3125″ Shank Diameter, 0.020″ Corner Radius - Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life. Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than tin and ticn coatings. Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications. 35-degree helix angle provides increased cutting action and chip evacuation compared to lower helix angles for machining stainless steel and titanium.

 

Kodiak Cutting Tools KCT152249 USA Made Solid Carbide 0.06″ Corner Radius End Mill with 3/8″ Shank Diameter, 4 Flute, 1″ Length of Cut, 2-1/2″ Overall Length - 060 carbide, corner radius. . 3/8 inch diameter solid carbide end mill, with radius 3/8″ shank 1″ length of cut 2-1/2″ overall length 4 flute radius-.

 

YG-1 G8A37 Carbide Micro Corner Radius End Mill, Metric, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 40mm Overall Length, 1mm Cutting Diameter, 3mm Shank Diameter, 0.1mm Corner Radius - Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life. Stub-length cutting edges and long-reach shank increase the strength of the tool while providing access to recessed areas of the workpiece. High-performance carbide provides better wear resistance and toughness than standard carbide and can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than tin and ticn coatings. Suitable for high-performance slotting and machining in recessed areas on hardened steel, heat-resistant steel, and materials with a rockwell hardness up to c70.

 

Niagara Cutter N18655 Carbide Corner Radius End Mill, Long Length/Reach, AlTiN Finish, Roughing/Finishing Cut, 35-Degree, 3-Flute, 5″ OAL, 0.500″ Cut Diameter, 0.500″ Shank Diameter, 0.03″ Radius - 35-degree helix angle provides increased cutting action and chip evacuation compared to lower helix angles for machining stainless steel and titanium. Extended-reach neck style provides access to recessed areas of the workpiece. Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life. Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications. Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than tin and ticn coatings.

 

Kodiak Cutting Tools KCT153228 USA Made Solid Carbide 0.03″ Corner Radius End Mill with 1/4″ Shank Diameter, 4 Flute, 1″ Length of Cut, 4″ Overall Length - 1/4 inch diameter solid carbide end mill, with radius 1/4″ shank 1″ length of cut 4″ overall length 4 flute radius-0. . 030 carbide, corner radius.

 

Kodiak Cutting Tools KCT154779 USA Made Solid Carbide Corner Radius End Mill with 3/8″ Shank, 4 Flute, 0.045″, 4″ Overall Length, 1-3/4″ Length of Cut - 045 carbide, corner radius. . 3/8 inch diameter solid carbide end mill, with radius 3/8″ shank 1-3/4″ length of cut 4″ overall length 4 flute radius-0.

 

GUHRING 9030790079440 RF100 U Carbide Corner Radius End Mill, Variable Helix, FIREX Finish, 4 Flute, 5/16″ Size, 2-1/2″ Overall Length, 0.031″ Radius - Firex coated for additional heat and abrasion resistance, the rf100 u style is a versatile design for the ever changing materials of the job shop environment. . The rf100 u is a four flute 35º/38º variable helix design for a wide range of materials. Designed for slotting, roughing and finishing operations.

 

Kodiak Cutting Tools KCT152040 USA Made Solid Carbide 0.02″ Corner Radius End Mill with 1/8″ Shank Diameter, 4 Flute, 1/2″ Length of Cut, 1-1/2″ Overall Length - 020 carbide, corner radius. 1/8 inch diameter solid carbide end mill, with radius 1/8″ shank 1/2″ length of cut 1-1/2″ overall length 4 flute radius-.

 

Sandvik Coromant RA215.24 Carbide Corner Radius End Mill, TiAlN Monolayer Finish, Finishing Cut, Non-Center Cutting, 50 Deg Helix, 4 Flutes, 3.000″ Overall Length, 0.125″ Cutting Diameter, 0.25″ Shank Diameter, 0.031″ Corner Radius - Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant (“dry machining”). Gauge length 1583. Geometry l. Straight 4° to 6° first choice for finishing core diameter 70%. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Shank style cylindrical.

 

Niagara Cutter N47773 Carbide Corner Radius End Mill, Uncoated Bright Finish, Roughing/Finishing Cut, 35-Degree, 3-Flute, 51 mm OAL, 6 mm Cut Diameter, 6.000 mm Shank Diameter, 0.5″ Radius - Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life. Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications. 35-degree helix angle provides increased cutting action and chip evacuation compared to lower helix angles for machining stainless steel and titanium. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.

 

Niagara Cutter N57889 Carbide Corner Radius End Mill, Long Reach, Uncoated Bright Finish, Roughing/Finishing Cut, 40-Degree, 3-Flute, 3″ OAL, 0.375″ Cut Diameter, 0.375″ Shank Diameter, 0.015″ Radius - 40-degree helix provides the efficient cutting action and chip evacuation required to machine aluminum and other nonferrous materials. Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Wiper flat on cutting edges for a smoother finish than conventional end mills. Corner radius end mills with extended-reach neck style have cutting edges with rounded corners to reduce chipping and provide longer tool life, and a long neck to provide access to recessed areas of the workpiece.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.