1″ – 16 HSS Right Hand Tap, Thread Tap 1-16 TPI
- Round shank with square driver for general application. Normal diameter m5. Pitch 08 mm. Premium high speed steel m2. Surface finish bright.
Micro Taps for Clocks and Watches Tapping, Mini NC High Speed Steel Metric Straight Flute Coarse Thread Design, 10 pcs(M1 M1.2 M1.4 M1.6 M1.7 M1.8 M2 M2.5 M3 M3.5)
- Thread pitch of straight flute tap is as follows m1 x 025, m12 x 025, m14 x 03, m16 x 035, m17 x 035, m18 x 035, m2 x 04, m25 x 045, m3 x 05, m35 x 06. This thread tap set metric mainly used for clocks and watches, and low hardness of wood and soft metal and plastic hole processing. There are total 10 pieces taps in different metric sizes from m1 to m35(m1 m12 m14 m16 m17 m18 m2 m25 m3 m35), and with carved marking size on the corresponding shank. Made of high speed steel with high wear and heat resistant, durable and with opening direction sign on the box. Standard metric thread and smaller thread tab design, clear and tidy, no burr, provide rapid chip removal for efficient threading and smooth tapping.
KMIAN TOOLS 7/8″ – 16 UNEF HSS Machine Tap, Right Hand Thread Tap, Plug Tap
- Premium high speed steel m2. Pitch 12 tpi. Surface finish bright. Round shank with square driver for general application. Normal diameter 1 1/8″.
POVAD 14mm X 1.25 Metric HSS right Hand Thread Tap M14 X 1.25mm Pitch
- Metric m14 x 125mm right hand thread tap. Pitch 125mm. Diameter 14mm.
IBEUTES Adjustable T-Handle Ratchet Tap Holder Wrench Tapping Threading Tool Set with 5pcs M3-M8 3mm-8mm Machine Screw Thread Metric Plug T-shaped Tap
- Easily switched from left to right handed operation, or locked for non-ratcheting use. Parallel-clamping tool steel jaws and knurled chuck provide a secure, firm grip on hex or square drives. Chromium-plated finish for the highest durability size of screw thread taps m305, m407, m508, m610, m8125 usage for taps m3-m8 length of wrench 85mm / 335in. Adjustable t-handle can be “slipped” from side to side for positioning convenience and added leverage in tight places. Position gear box for quick, efficient ratcheting action designed for use with taps and can also use on the left hand tap , reamers, screw extractors and other tools with a square shank.
5/8″ – 24 UNEF HSS Machine Tap, Right Hand Thread Tap, Plug Tap
- Surface finish bright. Round shank with square driver for general application. Normal diameter 9/16″. Pitch 18 tpi. Premium high speed steel m2.
6mm X 1 Metric HSS Left Hand Machine Tap, Plug Tap, Left Hand Thread Tap M6 X 1.0mm
- 1/2-28 nef hand bottom tap. H3 thread limit. Bottoming style chamfer for blind holes. 4 flutes hand tap. Made in usa of premium high speed steel.
HSS 5/16″ – 36 Right Hand Thread Tap 5/16 – 36 TPI NEW
- >brand new and high quality and fast ships from usa compatible with cutting tools & consumables package included 1 piece of right hand thread tap.
9/16 -20 Right & Left Hand Thread Tap HSS 9/16” – 20 TPI For Bike Crank Repair
- This is an aftermarket part. High quality and fast ships from usa. Package included 1x right hand tap 9/16”, 20 tpi , 1x left hand tap 9/16”, 20 tpi.
Adjustable 5-12mm T-Handle Ratchet Tap M5-M12 Wrench Metric Hand Thread Tap … (M5-M12)
- The handle is adjustable and removable, great for avoiding nearby obstacles and facilitating easier threading in awkward areas. The head is fully adjustable to accommodate any metric size tap and the tool is fully reversible via the ratchet switch. Adjustable t-handle can be “slipped” from side to side for positioning convenience and added leverage in tight places. Fantastic for motor mechanics, engineers, electricians ； m3-m8 metric tap wrench (86mm long body x 100mm handle width) m5-m12metric tap wrench (110mm long body x 120mm handle width). Easily switched from left to right handed operation, or locked for non-ratcheting use.
Kodiak Cutting Tools KCT202717 USA Made 1/4-20 Hand Threading Tap Set, Includes Taper, Plug and Bottom Taps, Ground Threads, High Speed Steel, H3 Limit, 4 Flute, 1/4″ Diameter x 20 TPI (Pack of 3)
- 1/4-20 hand threading tap. 255″ shank 1 thread length 2-1/2″ overall length 4 flute standard hand threading tap.
M20 X 1.5 Metric HSS Right Hand Thread Tap（2 Pcs）
- Compatible with a variety of high speed steel material, can adapt to the block of steel, iron, steel and other tools, a series of. Size m20x15mm,diameter 20mm,pitch 15mm. Carbide hss, high hardness, full grinding thread taps, can be used in metric coarse (m) or metric (mf) right hand thread options are different. Straight fluted screw taps, excellent chip removal. Round, shank, with, square, end, tap, to, allows, be, used, in,, hand, or, power-driven, applications.
HSS 5/16-20 tap and die Set, Machine Thread Tap And Round Thread Die Right Hand HSS Taper
- 【Package includes】 5/16-20 tap and die. 【Round die】 not easily broken tooth chip fast, abrasion resistance and long service lifehss tap offers precision cut threads, accurately formed for consistent, exact threading. 【tap 】 chip removal, high efficiency, debris rapidly discharged in the tank no blocking, fast efficiency. 【Advantage】 heat treated and tempered for file hard threads and a long, useful life. 【Model】5/16-20 tap and die , pitch 20 , material hss.
MaxTool 3/8-16B HAND THREAD TAP; BOTTOM HSS M2; 16 TPI; FULLY GROUND RIGHT HAND; HBF02W00R024
- You can always rely on maxtoolmaxtool’s slogan is consistent quality maxtool toolmax. This uncoated taps can be used on a broad range of materials. We offer our products worldwide, unless otherwise restricted by our suppliersin addition, maxtool offers re-sharpening services and custom tooling solutionsmaxtool warmly welcomes everyone to visit our amazon store, and honestly appreciates everyone very much to give a cooperative chance to discuss your requirementmaxtool will do the best to make each buyer satisfaction. It is available in three different ansi standards unc (unified coarse), unf (unified fine), or uns (unified special). The premium high speed steel material provides long tool life. They are used to create right-hand threads in a range of materials. Maxtool unc and unf uncoated high-speed steel three-piece hand thread tap sets, which include taper, plug, and bottom chamfers, have straight flutes and round shanks with square driver. The straight flutes are suitable for threading through holes and blind or bottoming holes. Maxtool is a cutting tools distributor in new york to meet a wide range cutting demand of customers in today’s markets, which include automotive, aerospace, electronics, medical, printed circuit boards, optical industries, and moremaxtool maintains the leading spirit in supply of standard and custom-made high performance cutting tools, such as polycrystalline diamond (pcd), polycrystalline cubic boron nitride (pcbn), carbide, high speed steel (hss) tools, hole saws, diamond wheels, etc for machining ferrous, non-ferrous, composite, fiberglass, and carbon fiber materials. The round shank with square driver makes the taps suitable for hand or power-driven applications.
Eastwood Adjustable Ratcheting Thread Tap Wrench T-Handle Tap Holder Tapping Threading Tool Set Left And Right Adjustment Hand
- Tap capacity m6-m14 1/4 in-1/2 in. The ratcheting action makes this t-handle tap wrench faster and easier to use than your typical tap wrench. Left and right hand ratcheting action. Dual handles for two hand operation. Great for quickly cleaning out threads after painting or powder coating.
1/2″ – 18 HSS Right hand Thread Tap
- 【Function】ideal for auto repair and machinery where metric threads are specified. 1/2″, 18 hss right hand thread tap. 【material】made of bearing steel, durable and quality assurance long term use. 【Specification】 spiral pointed tap for threading a circular tube,down rows of pins. 【Size & length】thread tap diameter m3/m4/m5/m6/m8/m10/m12 length 48mm(m3), 50mm(m4), 58mm(m5), 60mm(m6), 63mm(m8), 65mm(m10), 75mm(m12) (approx).
37/64″ – 28 HSS Machine Tap, Right Hand Thread Tap, 37/64-28 TPI
- Metric tap can be used with stringers and electric drills to cut the threads in the holes to form a concave surface that acts like a nut. Left-hand cut tools have a cutting action that engages when they are run in a counter-clockwise direction. Thread length 315mm total length 945mm material hss. Thread size m14 shank width 9mm pitch 15mm. Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading.
XtremeAmazing M14 x 1.5mm Metric HSS Tap and Die Set Right Hand Thread
- Round die not easily broken tooth chip fast, abrasion resistance and long service life. Application range use for carbon steel, alloy steel and cast iron, such as through hole processingallows tap to be used in hand or power-driven applications. Package contents 1 x tap and die set. Size m14x15mm, pitch15mm.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
