Best 16 Shank Diameters for 2020

 

LMT Onsrud 52-700 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 22 Degree Helix 2 Flutes 30000 Overall Length 02500 Cutting Diameter 02500 Shank Diameter

LMT Onsrud 52-700 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 52-700 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Double flute, 22 degree angle. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

LMT Onsrud 63-602 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 22 Degree Helix 1 Flute 15000 Overall Length 00625 Cutting Diameter 01250 Shank Diameter

LMT Onsrud 63-602 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 1.5000″ Overall Length, 0.0625″ Cutting Diameter, 0.1250″ Shank Diameter

LMT Onsrud 63-602 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 1.5000″ Overall Length, 0.0625″ Cutting Diameter, 0.1250″ Shank Diameter - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Single flute, 22 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Cleaning Bottom Router Bits JESTUOUS 14 Inch Shank Diameter 1 Cutting Diameter 2 Flute Carbide Tipped Cutter Up Shear Flat Spoilboard Surfacing Planing Tool

Cleaning Bottom Router Bits JESTUOUS 1/4 Inch Shank Diameter 1 Cutting Diameter 2 Flute Carbide Tipped Cutter Up Shear Flat Spoilboard Surfacing Planing Tool

Cleaning Bottom Router Bits JESTUOUS 1/4 Inch Shank Diameter 1 Cutting Diameter 2 Flute Carbide Tipped Cutter Up Shear Flat Spoilboard Surfacing Planing Tool - Overlapped carbide produces a smooth flat bottom cut,will level the bottom of a dado cut on all popular wobble blades. Up-shear configuration improves chip removal, while the cutting-edge orientation produces a smooth surface. Bottom cleaning router bits often used for cutting and smoothing a variety of materials from wood, plywood, mdf and other wood composites, plastics, fiberglass, and solid surface etc. 2 flute, carbide tipped. Use on cnc and other automatic routers as well as hand held and table mounted portable routers.

 

Starrett 93F T-Handle Tap Wrench 14-12 Tap Size 316 - 516 Square Shank Diameter 13 Body Length

Starrett 93F T-Handle Tap Wrench, 1/4-1/2″ Tap Size, 3/16″ – 5/16″ Square Shank Diameter, 13″ Body Length

Starrett 93F T-Handle Tap Wrench, 1/4-1/2″ Tap Size, 3/16″ – 5/16″ Square Shank Diameter, 13″ Body Length - Wrench have a sliding handle that is frictionally held, the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. Starrett no 93 t-handle tap wrench is for holding taps, drills, reamers and other small tools to be turned by hand, it is properly heat treated to withstand ordinary shop use. It is identical in construction. The body is centered, enabling the worker to use it on lathe centers or on an upright drilling machine to start the tap straight. The jaws conform to the tool being held, making it rigid and less apt to loosen.

 

Micro 100 SR-125-4 Round Blank 18 Shank Diameter 4 Overall Length Solid Carbide Tool

Micro 100 SR-125-4 Round Blank, 1/8″ Shank Diameter, 4″ Overall Length, Solid Carbide Tool

Micro 100 SR-125-4 Round Blank, 1/8″ Shank Diameter, 4″ Overall Length, Solid Carbide Tool - Designed and engineered for those who manufacture a variety of solid carbide tooling such as end mills, boring and/or turning tools, drills, and other stationary and rotary type tools/tooling. Micro 100, sr-125-4, precision ground, solid carbide blanks. Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. For over 45 years, micro 100 is a known industry leader and internationally acclaimed. Best suited foremost types of materials. Their substrate is in a class of its own, resulting from an exclusive treating process that allows for increased speeds and feeds and extended tool life.

 

LMT Onsrud 52-240 Solid Carbide Upcut Spiral Wood Rout Inch Uncoated Bright Finish 30 Degree Helix 2 Flutes 20000 Overall Length 01250 Cutting Diameter 02500 Shank Diameter

LMT Onsrud 52-240 Solid Carbide Upcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 52-240 Solid Carbide Upcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Double flute, 30 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems.

 

Carbide Burr Set JESTUOUS 14 Inch Shank Diameter Double Cut Edge Rotary File Polishing Carving Tool for Die Grinder Drill Bits8pcs

Carbide Burr Set JESTUOUS 1/4 Inch Shank Diameter Double Cut Edge Rotary File Polishing Carving Tool for Die Grinder Drill Bits,8pcs

Carbide Burr Set JESTUOUS 1/4 Inch Shank Diameter Double Cut Edge Rotary File Polishing Carving Tool for Die Grinder Drill Bits,8pcs - 8-piece double cut carbide rotary file burr set,includes sa, sc, sd and sf type burrs. Used for metal working in mold and pattern making, die sinking, surface cleaning and maintenance,perfect for opening holes, or porting heads on ferrous materials. Carbide burrs sets fit most small rotary tools,die grinders,for woodworking drilling carving engraving milling porting. Made of heat-treated tungsten carbide material,sintered and machined from 100% new raw tungsten carbide. Unique tooth angle prevents chipping for the longest lasting design possible.

 

Magnate 709 V-Grooving Router Bits - 90 Degree 2 Cutting Diameter 12 Shank Diameter

Magnate 709 V-Grooving Router Bits – 90 Degree; 2″ Cutting Diameter; 1/2″ Shank Diameter

Magnate 709 V-Grooving Router Bits – 90 Degree; 2″ Cutting Diameter; 1/2″ Shank Diameter - It is also equipped with wide open gullets for easy disposal of wood chips. Also good for sign lettering. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. These bits make both shallow and deep grooves in solid wood and composition boards. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. In case a bit doesn’t come with a speed chart. You may try the following suggestion. Excessive overall length may cause tool damage. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It can also be used to mill a diamond pattern on flat or spindle stock. When used with the legacy ornamental mill, this bit can be used to chamfer square to round transitions. It is suited for softwoods, hardwoods, chipboard, plywood and etc. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Can be used for decorative veining of drawers and cabinets.

 

Carbide Burrs Set JESTUOUS Double Cut 14 Inch Shank Diameter Solid Tungsten Carbide Rotary File Burs Kit10pcs

Carbide Burrs Set JESTUOUS Double Cut 1/4 Inch Shank Diameter Solid Tungsten Carbide Rotary File Burs Kit,10pcs

Carbide Burrs Set JESTUOUS Double Cut 1/4 Inch Shank Diameter Solid Tungsten Carbide Rotary File Burs Kit,10pcs - Sintered and machined from 100% new raw tungsten carbide,unique tooth angle prevents chipping for the longest lasting design possible. Carbide burr kits used for metal working in mold and pattern making, die sinking, surface cleaning and maintenance,perfect for opening holes, or porting heads on ferrous materials. Quantity10-piece, fits most pneumatic tool power tools. Includes sa, sc, sd, sf, sl, se and sh type burrs and good for drilling polishing engraving carving porting milling. Packaging set of 10 with plastic box.

 

YG-1 E5065 Carbide Square Nose End Mill Extra Long Reach Uncoated Bright Finish 30 Deg Helix 4 Flutes 6 Overall Length 025 Cutting Diameter 025 Shank Diameter

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6″ Overall Length, 0.25″ Cutting Diameter, 0.25″ Shank Diameter

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6″ Overall Length, 0.25″ Cutting Diameter, 0.25″ Shank Diameter - Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills. Four flutes produce a better finish than fewer flutes. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.

 

Micro 100 BB-2001200 Right Hand Cutting Radius Boring Tool 0200 Minimum Bore Diameter 1200 Maximum Bore Depth 0050 Projection 0005 Tool Radius 14 Shank Diameter 2-12 Overall Length Solid Carbide Tool

Micro 100, BB-2001200, Right Hand Cutting Radius Boring Tool, 0.200″ Minimum Bore Diameter, 1.200″ Maximum Bore Depth, 0.050″ Projection, 0.005″ Tool Radius, 1/4″ Shank Diameter, 2-1/2″ Overall Length, Solid Carbide Tool

Micro 100, BB-2001200, Right Hand Cutting Radius Boring Tool, 0.200″ Minimum Bore Diameter, 1.200″ Maximum Bore Depth, 0.050″ Projection, 0.005″ Tool Radius, 1/4″ Shank Diameter, 2-1/2″ Overall Length, Solid Carbide Tool - Each tool’s cutting edge/tip has a distinctive mirror like finish that significantly adds to material removal while improving surface finishes. 002″ ensuring ultimate precision and performance. Designed and engineered for most machining applications that require boring/turning. 003″ nose radius and the cutter diameter tolerance is +0. Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality their substrate is in a class of its own resulting from exclusive treating processes that allow for vastly increased speed and feed rates. 000″ to -0. This tool is manufactured with a 0. The micro 100 bb-2001200 uncoated solid carbide boring tool. Tools can be utilized for both roughing and finishing. For over 45 years, micro 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling.

 

Flush Trim Router Bit JESTUOUS 14 Inch Shank Diameter 38 Cutting Diameter with Bottom Bearing and Double Flute for CNC Router cut Laminate Template and Pattern Work

Flush Trim Router Bit JESTUOUS 1/4 Inch Shank Diameter 3/8 Cutting Diameter with Bottom Bearing and Double Flute for CNC Router cut Laminate Template and Pattern Work

Flush Trim Router Bit JESTUOUS 1/4 Inch Shank Diameter 3/8 Cutting Diameter with Bottom Bearing and Double Flute for CNC Router cut Laminate Template and Pattern Work - Designed to provide precise, efficient cuts,1/4″ shank and 3/8″ cutting diameter. Enclosed ball bearing guide ensures smooth running. Carbide tipped for wear resistance,perfect for flush trimming and template work. Double flutes, straight shank with top bearing. Use on cnc and other automatic routers as well as hand held and table mounted portable routers.

 

Atoplee 10pcs 235mm Shank Diameter Tungsten Carbide Cutter CNC Rotary Burr Set Hardness to HRC70

Atoplee 10pcs 2.35mm Shank Diameter Tungsten Carbide Cutter CNC Rotary Burr Set Hardness to HRC70

Atoplee 10pcs 2.35mm Shank Diameter Tungsten Carbide Cutter CNC Rotary Burr Set Hardness to HRC70 - High production efficiency, the processing efficiency is several times higher than file, nearly 10 times higher than small wheel stalk. Long life, the durability is 10 times higher than high-speed steel cutting tool, 200 times higher than small grinding wheel. In a great part of the work, it can replace the petiole small wheel, and no dust pollution. Features can process a variety of metal and non-metal, processing hardness would up to hrc70. Note mainly used in the pneumatic or electric-driven tools, the speed is generally 6000-50000 rev/min, clip positively while using, milling cutting mode is better, avoids reciprocating cutting. Suitable for processing these metal and non-metal, such as cast iron, cast steel, bearing steel, high carbon steel, chrome-nickel alloy, bronze, brass, and ceramic tile, marble, jade, bone, etc. Package included 10pcs tungsten carbide cutter rotary burr set. High product processing quality, high finish, can process out a various of high-precision mold cavity.

 

LMT Onsrud 57-320 Solid Carbide Downcut Spiral Wood Rout Inch Uncoated Bright Finish 30 Degree Helix 2 Flutes 30000 Overall Length 03750 Cutting Diameter 03750 Shank Diameter

LMT Onsrud 57-320 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter

LMT Onsrud 57-320 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter - Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Double flute, 30 degree angle.

 

SUKEO Brass Collet Mini Electric Grinder Quick Change Drill Chuck Bit Sets 05-32mm 164 Inch to 18 Inch Shank Diameter 43mm  017 for Rotary Tools Pack of 10pcs

SUKEO Brass Collet Mini Electric Grinder Quick Change Drill Chuck Bit Sets 0.5-3.2mm (1/64 Inch to 1/8 Inch) Shank Diameter 4.3mm / 0.17” for Rotary Tools (Pack of 10pcs)

SUKEO Brass Collet Mini Electric Grinder Quick Change Drill Chuck Bit Sets 0.5-3.2mm (1/64 Inch to 1/8 Inch) Shank Diameter 4.3mm / 0.17” for Rotary Tools (Pack of 10pcs) - 2【sizes】clamping diameter 05mm/08mm/10mm/12mm/15mm/18mm/20mm/24mm/30mm/32mm (1/64 inch, 1/32 inch, 3 /64 inch, 3/64 inch, 1/16 inch, 5/64 inch, 5/64 inch, 3/32 inch, 1/8 inch, 1/8 inch)total length 17mm (43/64 inch), outer diameter of the shank 43mm (11/64 inch), inner diameter 3mm (1/8 inch). 4【function】change the clamping capacity of the electric grinder and solve the blind zone of the clamping path its head is 4 claws, and the holding accessories are more stable choose from a wide range of sizes, suitable for more material sanding, to meet your multiple needs at once. 5【tips】please pay attention to the size of your original machine chuck before buying, otherwise it will not match and allow some errors due to manual measurements. 1【material】made of pure copper material, specially heat-treated, high hardness and durability. 3【application】compatible with most rotary tools such as hardware, hobbies, homes, etc suitable for installing drills, electric grinders, hanging mills, hoses, etc.

 

Carbide Burrs Set 5pcs JESTUOUS 14 Inch Shank Diameter Extended Long Double Cut edge Solid Tungsten Carbide Burr Rotery File for Die Grinder

Carbide Burrs Set 5pcs JESTUOUS 1/4 Inch Shank Diameter Extended Long Double Cut edge Solid Tungsten Carbide Burr Rotery File for Die Grinder

Carbide Burrs Set 5pcs JESTUOUS 1/4 Inch Shank Diameter Extended Long Double Cut edge Solid Tungsten Carbide Burr Rotery File for Die Grinder - Durable made of heat-treated tungsten carbide which lasts long working life, sharp and durable. Target suitable for all skill levels | this is a essential kit for woodworkers & enthusiasts who cleans up welds or works with metal frequently, easy to grasp and use, safe and reliable. Protective shapes included sa, sc, sd, sf, sl packed with nice plastic case forsafety storage and protection. Usage widely used for metalwork, tool making, model engineering, wood carving, welding, chamfering, casting, grinding, milling,cylinder head porting and sculpting. Quantity 5pcs carbide bur bits, extendedd extra long 1/4 inch diameter shank, fit most die grinders.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.