Steel Standard U-Style Clip-On Nut, Plain Finish, #10-24 Thread Size, For 0.025″-0.04″ Material Thickness, 0.203″ Edge Distance (Pack of 25)
- Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold. Steel is often used in applications where strength is the primary consideration. Clip is u-shaped for a secure hold on both sides of the panel when screwing down. Plain surface has no.
Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 5-1/2″ Length, Fully Threaded, Imported (Pack of 10)
- Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Steel is often used in applications where strength is the primary consideration. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Black oxide finish offers mild corrosion resistance and lubricity.
J.W. Winco L03-5316 CN Check Nut, Steel, 10-24 Thread
- Soft, low carbon steel, black oxide finish. May be used in combination with other components such as knurled head screws, torque thumb screws hand knob assemblies, toggle shoe clamp assemblies and many other tooling applications. May be used in combination with other components such as hand knob assemblies, toggle shoe clamp assemblies and many other tooling applications. Rohs compliant.
18-8 Stainless Steel Thread Cutting Screw, Plain Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type F, #10-24 Thread Size, 7/16″ Length (Pack of 50)
- Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. 18-8 stainless steel provides good corrosion resistance and strength. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Plain surface has no finish or coating.
Brass Machine Screw, Plain Finish, Pan Head, Phillips Drive, 3/8″ Length, #10-24 Threads (Pack of 100)
- Plain surface has no finish or coating. Brass provides corrosion resistance and offers thermal and electrical conductivity. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge.
Nylon 6/6 Machine Screw, Plain Finish, Black, Binding Head, Combination Phillips Slotted Drive, 1/2″ Length, #10-24 Threads (Pack of 100)
- The combination phillips slotted drive accepts both phillips and standard slotted drivers and is designed to allow the driver to slip out of the head when the screw has been tightened enough, helping to prevent over-tightening and damage to the thread or fastener. Nylon 6/6 provides resistance to abrasion, corrosion, and many chemicals and solvents. Machine screws are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. The binding head is a slightly undercut, low-profile head with a round top and short vertical sides. The black nylon 6/6 machine screw has a binding head with a combination phillips slotted drive. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. Nylon 6/6 can either absorb or lose moisture, which may alter its dimensions and mechanical properties. The head is shorter and wider than a pan head, enabling use in applications that would normally require a washer with the screw. The undercut feature binds wires beneath the head, making this head style a common choice for electrical applications. The material is a strong yet lightweight plastic and is nonconductive.
Nylon 6/6 Pan Head Machine Screw, Black, #2 Phillips Drive, #10-24 Thread Size, 1-1/2″ Length, Fully Threaded, USA Made (Pack of 100)
- Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. 18-8 stainless steel provides good corrosion resistance and strength. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Plain surface has no finish or coating. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic.
Steel Pan Head Machine Screw, Black Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 3″ Length, Fully Threaded, Import (Pack of 50)
- Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. .
Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 2-1/4″ Length, Fully Threaded, Imported (Pack of 25)
- Pan head has a flat top and short vertical sides with a rounded top edge. Brass provides corrosion resistance and offers thermal and electrical conductivity. Plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.
Nylon 6/6 Pan Head Machine Screw, Off-White, #2 Phillips Drive, #10-24 Thread Size, 1-1/2″ Length, Fully Threaded, USA Made (Pack of 100)
- Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Plain surface has no finish or coating. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. 18-8 stainless steel provides good corrosion resistance and strength. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic.
Morton Stainless Steel Knurled Head Nuts, Inch Size, 10-24 Thread Size, 7/16″ Length, 1/2″ Diameter
- Full interior thread. Made from 300 series stainless steel. Diamond knurl.
Nylon 6/6 Pan Head Machine Screw, Off-White, #2 Phillips Drive, #10-24 Thread Size, 1″ Length, Fully Threaded, USA Made (Pack of 100)
- Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 316 stainless steel provides strength and better corrosion resistance than 18-8 stainless steel. Plain surface has no finish or coating. Flat head is cone shaped for use in countersunk holes and has a flat top that fits flush with the mated surface.
Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 7/8″ Length, Fully Threaded, Import (Pack of 100)
- 18-8 stainless steel provides good corrosion resistance and strength. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.
Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Head, Phillips Drive, Type F, #10-24 Thread Size, 1″ Length (Pack of 100)
- Black oxide finish offers mild corrosion resistance and lubricity. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Steel is often used in applications where strength is the primary consideration.
Steel Self-Drilling Screw, Zinc Plated Finish, Wafer Head, Star Drive, #3 Drill Point, #10-24 Thread Size, 2″ Length (Pack of 25)
- Steel is often used in applications where strength is the primary consideration. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Zinc plating resists corrosion and has a reflective appearance. Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
