Best 10 Taper Shank Drill Bits

 

Cleveland 2411 High Speed Steel Undersized Taper Shank Drill Bit Black Oxide 2 Morse Taper Shank 135 Degree Split Point 78 Dia x 10 Lg Pack of 1

Cleveland 2411 High Speed Steel Undersized Taper Shank Drill Bit, Black Oxide, #2 Morse Taper Shank, 135 Degree Split Point, 7/8″ Dia. x 10″ Lg (Pack of 1)

Cleveland 2411 High Speed Steel Undersized Taper Shank Drill Bit, Black Oxide, #2 Morse Taper Shank, 135 Degree Split Point, 7/8″ Dia. x 10″ Lg (Pack of 1) - High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. With 30 degree helix. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. With 135 degree drill point, allowing for a cleaner drill hole and less slippage when starting.

 

Precision Twist 209CO Cobalt Steel Taper Shank Drill Bit Gold Oxide Finish Morse Taper Shank Spiral Flute 135 Degree Point Angle 2332

Precision Twist 209CO Cobalt Steel Taper Shank Drill Bit, Gold Oxide Finish, Morse Taper Shank, Spiral Flute, 135 Degree Point Angle, 23/32″

Precision Twist 209CO Cobalt Steel Taper Shank Drill Bit, Gold Oxide Finish, Morse Taper Shank, Spiral Flute, 135 Degree Point Angle, 23/32″ - Morse taper shank, for a secure and accurate tool-holding system. 135-degree, notch-point angle is self-centering, reduces walking, good for hard material and reduces pressure on cutting edges. Gold oxide to retain cutting fluid and prevent chip to tool welding. Long length drill bits (also called taper length) have longer flutes and overall lengths than jobber drill bits. High-speed steel (hss) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances.

 

Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit 4 Morse Taper Shank Spiral Flute 118 Degrees Conventional Point 1-18 Size Pack of 1

Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, #4 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 1-1/8″ Size (Pack of 1)

Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, #4 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 1-1/8″ Size (Pack of 1) - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 118 degrees conventional point. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. 1-1/8-inches size. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters.

 

Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit 2 Morse Taper Shank Spiral Flute 118 Degrees Conventional Point 2532 Size Pack of 1

Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, #2 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 25/32″ Size (Pack of 1)

Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, #2 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 25/32″ Size (Pack of 1) - 118 degrees conventional point. 25/32-inches size. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Michigan Drill 299 Series High-Speed Steel Oil Hole Drill Bit Black Oxide Finish 2 Morse Taper Shank Spiral Flute 118 Degrees Notched Point 716 Size 8-38 Length Pack of 1

Michigan Drill 299 Series High-Speed Steel Oil Hole Drill Bit, Black Oxide Finish, #2 Morse Taper Shank, Spiral Flute, 118 Degrees Notched Point, 7/16″ Size, 8-3/8″ Length (Pack of 1)

Michigan Drill 299 Series High-Speed Steel Oil Hole Drill Bit, Black Oxide Finish, #2 Morse Taper Shank, Spiral Flute, 118 Degrees Notched Point, 7/16″ Size, 8-3/8″ Length (Pack of 1) - High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. It features coolant passages throughout the length of the body.

 

Chicago Latrobe 510 Cobalt Steel Taper Shank Drill Bit Gold Oxide Finish 2 Morse Taper Shank 135 Degree Notch Point 58 Size

Chicago Latrobe 510 Cobalt Steel Taper Shank Drill Bit, Gold Oxide Finish, #2 Morse Taper Shank, 135 Degree Notch Point, 5/8″ Size

Chicago Latrobe 510 Cobalt Steel Taper Shank Drill Bit, Gold Oxide Finish, #2 Morse Taper Shank, 135 Degree Notch Point, 5/8″ Size - 135 degree notch point reduces thrust forces and easier penetration. Straw finish standard from stock and alternate coatings are available as stock modifications. Manufactured from premium 8% cobalt (m42) high-speed steel for increasing hot hardness. Furnished with american national standard (morse) taper shanks. Heavy-duty geometry for drilling in tough, high-tensile materials under extreme operating conditions.

 

Cleveland 3745 Cobalt Steel Taper Shank Drill Bit Armor Piercing Gold Oxide Finish Morse Taper Shank 130 Degree Conventional Point 58 Pack of 1

Cleveland 3745 Cobalt Steel Taper Shank Drill Bit, Armor Piercing, Gold Oxide Finish, Morse Taper Shank, 130 Degree Conventional Point, 5/8″ (Pack of 1)

Cleveland 3745 Cobalt Steel Taper Shank Drill Bit, Armor Piercing, Gold Oxide Finish, Morse Taper Shank, 130 Degree Conventional Point, 5/8″ (Pack of 1) - Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. With 15 degree helix. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Kodiak Cutting Tools KCT115773 USA Made  Taper Shank Drill Bits 1 Diameter

Kodiak Cutting Tools KCT115773 USA Made Taper Shank Drill Bits, 1″ Diameter

Kodiak Cutting Tools KCT115773 USA Made Taper Shank Drill Bits, 1″ Diameter - No3 morse taper. 2 flutes. Made in the usa. 6-3/8 length of cut. 11 overall length.

 

Cleveland 2440 Cobalt Steel Taper Shank Drill Bit Gold Oxide Finish 2 Morse Taper Shank 135 Degree Notch Point 58 Pack of 1

Cleveland 2440 Cobalt Steel Taper Shank Drill Bit, Gold Oxide Finish, #2 Morse Taper Shank, 135 Degree Notch Point, 5/8″ (Pack of 1)

Cleveland 2440 Cobalt Steel Taper Shank Drill Bit, Gold Oxide Finish, #2 Morse Taper Shank, 135 Degree Notch Point, 5/8″ (Pack of 1) - Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. With 30 degree helix. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters.

 

Chicago Latrobe 110 High-Speed Steel Taper Shank Drill Bit Black Oxide Finish 3 Morse Taper Shank 118 Degree Conventional Point 1 Size

Chicago Latrobe 110 High-Speed Steel Taper Shank Drill Bit, Black Oxide Finish, #3 Morse Taper Shank, 118 Degree Conventional Point, 1″ Size

Chicago Latrobe 110 High-Speed Steel Taper Shank Drill Bit, Black Oxide Finish, #3 Morse Taper Shank, 118 Degree Conventional Point, 1″ Size - Black oxide finish for increased wear resistance and added lubricity standard from stock. Manufactured from premium high-speed steel. Taper shank made to american national standard (morse) dimensions for use in corresponding morse taper holders. General-purpose geometry for drilling in.