25 Top Steel Band Saw Blades

 

Magnate M92C38R24 Carbon Tool Steel Bandsaw Blade 92 Long - 38 Width 24 Raker Tooth #ad

Magnate M92C38R24 Carbon Tool Steel Bandsaw Blade, 92″ Long – 3/8″ Width; 24 Raker Tooth

Magnate M92C38R24 Carbon Tool Steel Bandsaw Blade, 92″ Long – 3/8″ Width; 24 Raker Tooth #ad - Cones with a 30-day limited warranty. For wood or metal cutting 3/16″ width 14 raker tooth 0025″ thickness. For wood or metal cutting 3/8″ width 24 raker tooth 0025″ thickness 0049″ kerf. For wood or metal cutting 1/8″ width 18 raker tooth 0025″ thickness 0047″ kerf. Replacement blade for hitachi model cb75f 14-1/2-inch resaw band saw. Replacement blade for hitachi cb75f 14-1/2inch resaw band saw. For wood or metal cutting 1/4″ width 4 hook tooth 0025″ thickness 0047″ kerf. For wood or metal cutting 1/4″ width 24 raker tooth 0025″ thickness.

 

Magnate M107C14R24 Carbon Tool Steel Bandsaw Blade 107 Long - 14 Width 24 Raker Tooth #ad

Magnate M107C14R24 Carbon Tool Steel Bandsaw Blade, 107″ Long – 1/4″ Width; 24 Raker Tooth

Magnate M107C14R24 Carbon Tool Steel Bandsaw Blade, 107″ Long – 1/4″ Width; 24 Raker Tooth #ad - Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 107 inch ( 8 ft. Steel). It can cut all types of woods and is especially ideal for soft woods i. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. E. 11 inch, 8′ 11″ ) bandsaw blades suit the following models grizzly g1011, 8145z (105-1/4 to 109-1/4) dayton 5z023 emerson 10-1700, 10-1701 jet hvbs-712 rigid 970 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. 2, if the owner’s manual is not available, refer to previous invoices. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. The picture depicted represents one blade the pricing is for one blade/package. 3, cut your old bandsaw bla. E. Pine, polar, fir and spruce. It is also used for cutting plastics, aluminum, metals, and mild steel. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Carbon tool steel bandsaw blades are made from high end carbon steel.

 

Magnate M72C38H6 Carbon Tool Steel Bandsaw Blade 72 Long - 38 Width 6 Hook Tooth #ad

Magnate M72C38H6 Carbon Tool Steel Bandsaw Blade, 72″ Long – 3/8″ Width; 6 Hook Tooth

Magnate M72C38H6 Carbon Tool Steel Bandsaw Blade, 72″ Long – 3/8″ Width; 6 Hook Tooth #ad - Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. E. The type of tooth pattern used depends on the thickness of metal material to be cut. Steel). It can cut all types of woods and is especially ideal for soft woods i. It is also used for cutting plastics, aluminum, metals, and mild steel. Use 24 raker to cut 1/16″ to 1/4″ thick material, use 18 raker to cut 1/8″ to 3/8″ thick material, use 14 raker to cut 3/16″ to 7/16″ thick material, use 10 raker to cut 1/4″ to 5/8″ thick material, use 6 hook to cut 3/8″ to 2″ thick material, use 4 hook to cut 3/4″ to 4-1/2″ thick material, use 3 hook to cut 1″ to 6″ thick material, use 2 hook to cut 2″ to 12″ thick material, note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 72 inch ( 6 ft. All bandsaw blades are folded into 3 rings to avoid bulky packaging, the picture depicted represents one blade the pricing is for one blade/package. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. , 6′ ) bandsaw blades suit the following models shopsmith 10. E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Carbon tool steel bandsaw blades are made from high end carbon steel. In order to cut metal materials, the following is a guideline for choosing the adequate tooth pattern of a carbon tool steel bandsaw blade. Pine, polar, fir and spruce.

 

Magnate M5275C316R14 Carbon Tool Steel Bandsaw Blade 52-34 Long - 316 Width 14 Raker Tooth #ad

Magnate M52.75C316R14 Carbon Tool Steel Bandsaw Blade, 52-3/4″ Long – 3/16″ Width; 14 Raker Tooth

Magnate M52.75C316R14 Carbon Tool Steel Bandsaw Blade, 52-3/4″ Long – 3/16″ Width; 14 Raker Tooth #ad - For wood or metal cutting 1/4″ width 24 raker tooth 0025″ thickness. Blade has 4-teeth per inch. Provides long tooth life and exceptional durability. For wood or metal cutting 1/2″ width 4 hook tooth 0025″ thickness 0049″ kerf. Replacement blade for hitachi cb75f 14-1/2inch resaw band saw. Cones with a 30-day limited warranty. For wood or metal cutting 3/16″ width 14 raker tooth 0025″ thickness. Replacement blade for hitachi model cb75f 14-1/2-inch resaw band saw.

 

Magnate M72C12H6 Carbon Tool Steel Bandsaw Blade 72 Long - 12 Width 6 Hook Tooth #ad

Magnate M72C12H6 Carbon Tool Steel Bandsaw Blade, 72″ Long – 1/2″ Width; 6 Hook Tooth

Magnate M72C12H6 Carbon Tool Steel Bandsaw Blade, 72″ Long – 1/2″ Width; 6 Hook Tooth #ad - Carbon tool steel bandsaw blades are made from high end carbon steel. Pine, polar, fir and spruce. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 72 inch ( 6 ft. Steel). Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. , 6′ ) bandsaw blades suit the following models shopsmith 10. All bandsaw blades are folded into 3 rings to avoid bulky packaging, the picture depicted represents one blade the pricing is for one blade/package. In order to cut metal materials, the following is a guideline for choosing the adequate tooth pattern of a carbon tool steel bandsaw blade. It can cut all types of woods and is especially ideal for soft woods i. It is also used for cutting plastics, aluminum, metals, and mild steel. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. E. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. The type of tooth pattern used depends on the thickness of metal material to be cut. Use 24 raker to cut 1/16″ to 1/4″ thick material, use 18 raker to cut 1/8″ to 3/8″ thick material, use 14 raker to cut 3/16″ to 7/16″ thick material, use 10 raker to cut 1/4″ to 5/8″ thick material, use 6 hook to cut 3/8″ to 2″ thick material, use 4 hook to cut 3/4″ to 4-1/2″ thick material, use 3 hook to cut 1″ to 6″ thick material, use 2 hook to cut 2″ to 12″ thick material, note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. E.

 

Magnate M92C38H3 Carbon Tool Steel Bandsaw Blade 92 Long - 38 Width 3 Hook Tooth #ad

Magnate M92C38H3 Carbon Tool Steel Bandsaw Blade, 92″ Long – 3/8″ Width; 3 Hook Tooth

Magnate M92C38H3 Carbon Tool Steel Bandsaw Blade, 92″ Long – 3/8″ Width; 3 Hook Tooth #ad - Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. It can cut all types of woods and is especially ideal for soft woods i. This method will provide the mos. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Carbon tool steel bandsaw blades are made from high end carbon steel. 2, if the owner’s manual is not available, refer to previous invoices. E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 92 inch ( 7 ft. Pine, polar, fir and spruce. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 8 inch, 7′ 8″ ) bandsaw blades suit the following models enco 199-9001 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. E. It is also used for cutting plastics, aluminum, metals, and mild steel. Steel). The picture depicted represents one blade the pricing is for one blade/package.

 

Magnate M675C14H4 Carbon Tool Steel Bandsaw Blade 67-12 Long - 14 Width 4 Hook Tooth #ad

Magnate M67.5C14H4 Carbon Tool Steel Bandsaw Blade, 67-1/2″ Long – 1/4″ Width; 4 Hook Tooth

Magnate M67.5C14H4 Carbon Tool Steel Bandsaw Blade, 67-1/2″ Long – 1/4″ Width; 4 Hook Tooth #ad - Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Carbon tool steel bandsaw blades are made from high end carbon steel. E. Use 24 raker to cut 1/16″ to 1/4″ thick material, use 18 raker to cut 1/8″ to 3/8″ thick material, use 14 raker to cut 3/16″ to 7/16″ thick material, use 10 raker to cut 1/4″ to 5/8″ thick material, use 6 hook to cut 3/8″ to 2″ thick material, use 4 hook to cut 3/4″ to 4-1/2″ thick material, use 3 hook to cut 1″ to 6″ thick material, use 2 hook to cut 2″ to 12″ thick material, note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Pine, polar, fir and spruce. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 67-1/2 inch ( 5 ft. 7-1/2 inch, 5′ 7-1/2″ ) bandsaw blades suit the following models 10″ rikon 10-300 jet jwbs-10os. Steel). All bandsaw blades are folded into 3 rings to avoid bulky packaging, the picture depicted represents one blade the pricing is for one blade/package. It can cut all types of woods and is especially ideal for soft woods i. In order to cut metal materials, the following is a guideline for choosing the adequate tooth pattern of a carbon tool steel bandsaw blade. The type of tooth pattern used depends on the thickness of metal material to be cut. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. E. It is also used for cutting plastics, aluminum, metals, and mild steel.

 

Magnate M80C14R14 Carbon Tool Steel Bandsaw Blade 80 Long - 14 Width 14 Raker Tooth #ad

Magnate M80C14R14 Carbon Tool Steel Bandsaw Blade, 80″ Long – 1/4″ Width; 14 Raker Tooth

Magnate M80C14R14 Carbon Tool Steel Bandsaw Blade, 80″ Long – 1/4″ Width; 14 Raker Tooth #ad - Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Pine, polar, fir and spruce. The picture depicted represents one blade the pricing is for one blade/package. Steel). It is also used for cutting plastics, aluminum, metals, and mild steel. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 8 inch, 6′ 8″ ) bandsaw blades suit the following models sears craftsman 9ht2433n, 9ht2331n, 2428, 24331n, 24393n industrial 12″, 113 angle head atlas general international 90-060 m1 (woodworking) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. 2, if the owner’s manual is not available, refer to previous invoices. It can cut all types of woods and is especially ideal for soft woods i. E. E. Carbon tool steel bandsaw blades are made from high end carbon steel. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 80 inch ( 6 ft.

 

Magnate M80C14R24 Carbon Tool Steel Bandsaw Blade 80 Long - 14 Width 24 Raker Tooth #ad

Magnate M80C14R24 Carbon Tool Steel Bandsaw Blade, 80″ Long – 1/4″ Width; 24 Raker Tooth

Magnate M80C14R24 Carbon Tool Steel Bandsaw Blade, 80″ Long – 1/4″ Width; 24 Raker Tooth #ad - Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Steel). Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. E. The picture depicted represents one blade the pricing is for one blade/package. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Pine, polar, fir and spruce. It is also used for cutting plastics, aluminum, metals, and mild steel. It can cut all types of woods and is especially ideal for soft woods i. E. Carbon tool steel bandsaw blades are made from high end carbon steel. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 2, if the owner’s manual is not available, refer to previous invoices. 8 inch, 6′ 8″ ) bandsaw blades suit the following models sears craftsman 9ht2433n, 9ht2331n, 2428, 24331n, 24393n industrial 12″, 113 angle head atlas general international 90-060 m1 (woodworking) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 80 inch ( 6 ft.

 

Magnate M725C14H6 Carbon Tool Steel Bandsaw Blade 72-12 Long - 14 Width 6 Hook Tooth #ad

Magnate M72.5C14H6 Carbon Tool Steel Bandsaw Blade, 72-1/2″ Long – 1/4″ Width; 6 Hook Tooth

Magnate M72.5C14H6 Carbon Tool Steel Bandsaw Blade, 72-1/2″ Long – 1/4″ Width; 6 Hook Tooth #ad - The picture depicted represents one blade the pricing is for one blade/package. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. It can cut all types of woods and is especially ideal for soft woods i. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 72-1/2 inch ( 6 ft. 3, cut your old bandsaw blade so that it lies flat on a level surface,. Carbon tool steel bandsaw blades are made from high end carbon steel. It is also used for cutting plastics, aluminum, metals, and mild steel. 1/2 inch, 6′ 1/2″ ) bandsaw blades suit the following models delta 28-195, bs150ls skil hd 3640 ryobi bs50n dremel 1120 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. E. Pine, polar, fir and spruce. 2, if the owner’s manual is not available, refer to previous invoices. Steel). E.

 

Magnate M9975C14H6 Carbon Tool Steel Bandsaw Blade 99-34 Long - 14 Width 6 Hook Tooth #ad

Magnate M99.75C14H6 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 1/4″ Width; 6 Hook Tooth

Magnate M99.75C14H6 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 1/4″ Width; 6 Hook Tooth #ad - It is also used for cutting plastics, aluminum, metals, and mild steel. It can cut all types of woods and is especially ideal for soft woods i. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 99-3/4 inch ( 8 ft. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. E. Steel). The picture depicted represents one blade the pricing is for one blade/package. Carbon tool steel bandsaw blades are made from high end carbon steel. Pine, polar, fir and spruce. 3-3/4 inch, 8′ 3-3/4″ ) bandsaw blades suit the following models craftsman professional 14 general international 90-100 m1 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 3, cut your old bandsaw blade so that it lies flat on a level surf. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. 2, if the owner’s manual is not available, refer to previous invoices. E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc.

 

Magnate M9975C14R14 Carbon Tool Steel Bandsaw Blade 99-34 Long - 14 Width 14 Raker Tooth #ad

Magnate M99.75C14R14 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 1/4″ Width; 14 Raker Tooth

Magnate M99.75C14R14 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 1/4″ Width; 14 Raker Tooth #ad - Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Steel). It can cut all types of woods and is especially ideal for soft woods i. E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 2, if the owner’s manual is not available, refer to previous invoices. The picture depicted represents one blade the pricing is for one blade/package. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 99-3/4 inch ( 8 ft. It is also used for cutting plastics, aluminum, metals, and mild steel. Carbon tool steel bandsaw blades are made from high end carbon steel. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. E. Pine, polar, fir and spruce. 3-3/4 inch, 8′ 3-3/4″ ) bandsaw blades suit the following models craftsman professional 14 general international 90-100 m1 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. 3, cut your old bandsaw blade so that it lies flat on a level surf.

 

Magnate M5925C38R24 Carbon Tool Steel Bandsaw Blade 59-14 Long - 38 Width 24 Raker Tooth #ad

Magnate M59.25C38R24 Carbon Tool Steel Bandsaw Blade, 59-1/4″ Long – 3/8″ Width; 24 Raker Tooth

Magnate M59.25C38R24 Carbon Tool Steel Bandsaw Blade, 59-1/4″ Long – 3/8″ Width; 24 Raker Tooth #ad - Pine, polar, fir and spruce. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 59-1/4 inch ( 4 ft. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 2, if the owner’s manual is not available,. It is also used for cutting plastics, aluminum, metals, and mild steel. The picture depicted represents one blade the pricing is for one blade/package. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Steel). 11-1/4 inch, 4′ 11-1/4″ ) bandsaw blades suit the following models ryobi bs903 (59-1/4″ to 59-1/2 ) black & decker, 9411 sears craftsman skil 9″, 3381-01 tradesman 9″pro-tech 9″ collins 9″ toolkraft 4500, 4502 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. It can cut all types of woods and is especially ideal for soft woods i. Carbon tool steel bandsaw blades are made from high end carbon steel. E. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E.

 

Magnate M925C38R10 Carbon Tool Steel Bandsaw Blade 92-12 Long - 38 Width 10 Raker Tooth #ad

Magnate M92.5C38R10 Carbon Tool Steel Bandsaw Blade, 92-1/2″ Long – 3/8″ Width; 10 Raker Tooth

Magnate M92.5C38R10 Carbon Tool Steel Bandsaw Blade, 92-1/2″ Long – 3/8″ Width; 10 Raker Tooth #ad - Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Pine, polar, fir and spruce. Carbon tool steel bandsaw blades are made from high end carbon steel. Steel). It is also used for cutting plastics, aluminum, metals, and mild steel. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. E. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. It can cut all types of woods and is especially ideal for soft woods i. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 92-1/2 inch ( 7 ft. 8-1/2 inch, 7′ 8-1/2″ ) bandsaw blades suit the following models jet j-8203k powerline mark 1 shopcraft 28-283f mit 5125 american industrial amt 4113 enco 505-1372 (models 8201, 8203, 8201vs and 8203vs), 199-9013, 199-9011, 199-9001 dayton 3z981 central machinery 32206-ocea, 32208-ocea, 5687-ocea, 2146-3bmf, 00580-ocea nu-mark 14″ united 14″ wilton tradesman 8201, 8203, 8201vs, 8203vs grizzly g0580x g0555x (92-1/2″ to 93-1/2″) 14″ ohio fo. The picture depicted represents one blade the pricing is for one blade/package.

 

Magnate M62C38R24 Carbon Tool Steel Bandsaw Blade 62 Long - 38 Width 24 Raker Tooth #ad

Magnate M62C38R24 Carbon Tool Steel Bandsaw Blade, 62″ Long – 3/8″ Width; 24 Raker Tooth

Magnate M62C38R24 Carbon Tool Steel Bandsaw Blade, 62″ Long – 3/8″ Width; 24 Raker Tooth #ad - Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. It can cut all types of woods and is especially ideal for soft woods i. Pine, polar, fir and spruce. Carbon tool steel bandsaw blades are made from high end carbon steel. E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Steel). It is also used for cutting plastics, aluminum, metals, and mild steel. E. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 62 inch ( 5 ft. The picture depicted represents one blade the pricing is for one blade/package. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 2 inch, 5′ 2″ ) bandsaw blades suit the following models skil 3104 sears craftsman 103-24556, 2442 9ht2442n central machinery d0686-4bmf, 01629-icea mark 1 rexon bs-12 alltrade 1996bbr powerline dbs-12 jet dbs-12 black & decker (some models) grizzly g8976 12″ walker-turner 10″ if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the.

 

Magnate M705C14R24 Carbon Tool Steel Bandsaw Blade 70-12 Long - 14 Width 24 Raker Tooth #ad

Magnate M70.5C14R24 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 1/4″ Width; 24 Raker Tooth

Magnate M70.5C14R24 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 1/4″ Width; 24 Raker Tooth #ad - E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Steel). E. It can cut all types of woods and is especially ideal for soft woods i. 3, cut your old bandsaw blade so that it lies flat on a level sur. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Pine, polar, fir and spruce. It is also used for cutting plastics, aluminum, metals, and mild steel. 2, if the owner’s manual is not available, refer to previous invoices. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. The picture depicted represents one blade the pricing is for one blade/package. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 70-1/2 inch ( 5 ft. 10-1/2 inch, 5′ 10-1/2″ ) bandsaw blades suit the following models craftsman 10″ 921400 atlas workshop 9360 rikon 10-305 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Carbon tool steel bandsaw blades are made from high end carbon steel.

 

Magnate M67C14R14 Carbon Tool Steel Bandsaw Blade 67 Long - 14 Width 14 Raker Tooth #ad

Magnate M67C14R14 Carbon Tool Steel Bandsaw Blade, 67″ Long – 1/4″ Width; 14 Raker Tooth

Magnate M67C14R14 Carbon Tool Steel Bandsaw Blade, 67″ Long – 1/4″ Width; 14 Raker Tooth #ad - E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Steel). It is also used for cutting plastics, aluminum, metals, and mild steel. This method w. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 67 inch ( 5 ft. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. It can cut all types of woods and is especially ideal for soft woods i. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. E. 2, if the owner’s manual is not available, refer to previous invoices. Pine, polar, fir and spruce. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. The picture depicted represents one blade the pricing is for one blade/package. 7 inch, 5′ 7″ ) bandsaw blades suit the following models ryobi bs1001svtradesman 8168 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Carbon tool steel bandsaw blades are made from high end carbon steel. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i.

 

Hitachi 967992 14-Inch Steel Band Saw Blade with Swaged Tip #ad

Hitachi 967992 1/4-Inch Steel Band Saw Blade with Swaged Tip

Hitachi 967992 1/4-Inch Steel Band Saw Blade with Swaged Tip #ad - Comes with a 30-day limited warranty. Replacement blade for hitachi model cb75f 14-1/2-inch resaw band saw. Provides long tooth life and exceptional durability. Blade has 4-teeth per inch. Designed to deliver straight, accurate cuts across a broad range of materials. This blade has 4 teeth per inch. Cones with a 30-day limited warranty. Replacement blade for hitachi cb75f 14-1/2inch resaw band saw.

 

Magnate M113C12H3 Carbon Tool Steel Bandsaw Blade 113 Long - 12 Width 3 Hook Tooth #ad

Magnate M113C12H3 Carbon Tool Steel Bandsaw Blade, 113″ Long – 1/2″ Width; 3 Hook Tooth

Magnate M113C12H3 Carbon Tool Steel Bandsaw Blade, 113″ Long – 1/2″ Width; 3 Hook Tooth #ad - E. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 113 inch ( 9 ft. 5 inch, 9′ 5″ ) bandsaw blades suit the following models grizzly g1073 16″. This method will provide. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. It is also used for cutting plastics, aluminum, metals, and mild steel. Carbon tool steel bandsaw blades are made from high end carbon steel. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 2, if the owner’s manual is not available, refer to previous invoices. Pine, polar, fir and spruce. Steel). 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. E. It can cut all types of woods and is especially ideal for soft woods i. The picture depicted represents one blade the pricing is for one blade/package. If in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness.

 

Magnate M80C38R10 Carbon Tool Steel Bandsaw Blade 80 Long - 38 Width 10 Raker Tooth #ad

Magnate M80C38R10 Carbon Tool Steel Bandsaw Blade, 80″ Long – 3/8″ Width; 10 Raker Tooth

Magnate M80C38R10 Carbon Tool Steel Bandsaw Blade, 80″ Long – 3/8″ Width; 10 Raker Tooth #ad - E. 2, if the owner’s manual is not available, refer to previous invoices. The picture depicted represents one blade the pricing is for one blade/package. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. E. It is also used for cutting plastics, aluminum, metals, and mild steel. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. It can cut all types of woods and is especially ideal for soft woods i. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Steel). 8 inch, 6′ 8″ ) bandsaw blades suit the following models sears craftsman 9ht2433n, 9ht2331n, 2428, 24331n, 24393n industrial 12″, 113 angle head atlas general international 90-060 m1 (woodworking) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 80 inch ( 6 ft. Pine, polar, fir and spruce. Carbon tool steel bandsaw blades are made from high end carbon steel.

 

Magnate M92C14R10 Carbon Tool Steel Bandsaw Blade 92 Long - 14 Width 10 Raker Tooth #ad

Magnate M92C14R10 Carbon Tool Steel Bandsaw Blade, 92″ Long – 1/4″ Width; 10 Raker Tooth

Magnate M92C14R10 Carbon Tool Steel Bandsaw Blade, 92″ Long – 1/4″ Width; 10 Raker Tooth #ad - The picture depicted represents one blade the pricing is for one blade/package. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 8 inch, 7′ 8″ ) bandsaw blades suit the following models enco 199-9001 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. This method will provide the mos. Pine, polar, fir and spruce. Steel). Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 2, if the owner’s manual is not available, refer to previous invoices. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 92 inch ( 7 ft. It can cut all types of woods and is especially ideal for soft woods i. E. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Carbon tool steel bandsaw blades are made from high end carbon steel. It is also used for cutting plastics, aluminum, metals, and mild steel. E.

 

Magnate M705C18R18 Carbon Tool Steel Bandsaw Blade 70-12 Long - 18 Width 18 Raker Tooth #ad

Magnate M70.5C18R18 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 1/8″ Width; 18 Raker Tooth

Magnate M70.5C18R18 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 1/8″ Width; 18 Raker Tooth #ad - It can cut all types of woods and is especially ideal for soft woods i. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 3, cut your old bandsaw blade so that it lies flat on a level sur. Pine, polar, fir and spruce. E. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Steel). 2, if the owner’s manual is not available, refer to previous invoices. It is also used for cutting plastics, aluminum, metals, and mild steel. Carbon tool steel bandsaw blades are made from high end carbon steel. 10-1/2 inch, 5′ 10-1/2″ ) bandsaw blades suit the following models craftsman 10″ 921400 atlas workshop 9360, 912 rikon 10-305 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 70-1/2 inch ( 5 ft. The picture depicted represents one blade the pricing is for one blade/package. E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc.

 

Magnate M9975C12H4 Carbon Tool Steel Bandsaw Blade 99-34 Long - 12 Width 4 Hook Tooth #ad

Magnate M99.75C12H4 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 1/2″ Width; 4 Hook Tooth

Magnate M99.75C12H4 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 1/2″ Width; 4 Hook Tooth #ad - Provides long tooth life and exceptional durability. Replacement blade for hitachi model cb75f 14-1/2-inch resaw band saw. For wood or metal cutting 1/2″ width 4 hook tooth 0025″ thickness 0049″ kerf. Replacement blade for hitachi cb75f 14-1/2inch resaw band saw. Blade has 4-teeth per inch. Comes with a 30-day limited warranty. For wood or metal cutting 1/4″ width 24 raker tooth 0025″ thickness. Cones with a 30-day limited warranty.

 

Magnate M67C14H6 Carbon Tool Steel Bandsaw Blade 67 Long - 14 Width 6 Hook Tooth #ad

Magnate M67C14H6 Carbon Tool Steel Bandsaw Blade, 67″ Long – 1/4″ Width; 6 Hook Tooth

Magnate M67C14H6 Carbon Tool Steel Bandsaw Blade, 67″ Long – 1/4″ Width; 6 Hook Tooth #ad - It is also used for cutting plastics, aluminum, metals, and mild steel. E. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. This method w. Carbon tool steel bandsaw blades are made from high end carbon steel. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. The picture depicted represents one blade the pricing is for one blade/package. Steel). Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 67 inch ( 5 ft. It can cut all types of woods and is especially ideal for soft woods i. E. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. 2, if the owner’s manual is not available, refer to previous invoices. Pine, polar, fir and spruce. 7 inch, 5′ 7″ ) bandsaw blades suit the following models ryobi bs1001svtradesman 8168 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness.

 

Magnate M62C14R24 Carbon Tool Steel Bandsaw Blade 62 Long - 14 Width 24 Raker Tooth #ad

Magnate M62C14R24 Carbon Tool Steel Bandsaw Blade, 62″ Long – 1/4″ Width; 24 Raker Tooth

Magnate M62C14R24 Carbon Tool Steel Bandsaw Blade, 62″ Long – 1/4″ Width; 24 Raker Tooth #ad - Cones with a 30-day limited warranty. Blade has 4-teeth per inch. Provides long tooth life and exceptional durability. Replacement blade for hitachi cb75f 14-1/2inch resaw band saw. Replacement blade for hitachi model cb75f 14-1/2-inch resaw band saw. This blade has 4 teeth per inch. For wood or metal cutting 1/4″ width 24 raker tooth 0025″ thickness. Comes with a 30-day limited warranty.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.