25 Most Wanted Stud Extractors

 

Performance Tool W83202 Performance Tool 1/4-Inch to 3/4-Inch Stud Extractor - Sizes 1/4 to 3/4-inch. Use 1/2-inch drive ratchet. Knurled roller uses cam action to grasp stud firmly while minimizing damage. For removing broken or seized studs, bolts, etc. From 1/4-inch to 3/4-inch diameter.

 

Stanley Proto Facom FA-286A 1/2-Inch Drive Stud Extractor External Cam/Knurl Type - 1/2-inch and 1/4-inch drive capacity. Ideal for bolts with rusted, corroded or stripped threads. Knurled wheel grips stud when pressure is applied. Hex drive can be driven with wrench or ratcheting tool. Turn extractor with a ratchet, wrench or socket to engage the cam and stud, then pull out stud.

 

Stanley Proto Facom FA-287B.8 1/2-Inch Drive Stud Extractor Internal Cam/Roller Type M8 - 1/2-inch drive. Full polish finish. 8 facom 1/2-inch drive stud extractor internal cam/roller type m8 designed to grip studs using cam assemblies. 1/2-inch drive size. Stanley proto fa-287b. Capacity of 8mm.

 

10Pc Damaged Nut Bolt Remover Set 9-17mm &19mm Removal Kit Broken Stud Extractor - Can be driven with a metric spanner or socket. 10pcs damaged nuts and bolts extractors. Remove the nut is ten sets of different sizes suitable for damaged, rusted nut bolt, this is taken as unscrew screws, nuts and the most important conducting stabilization tool. Spiral cut teeth provide positive grip, remove circular or damaged bolts.

 

3/8″ Dr. Universal Stud Extractor - Hex drive can be used with an impact wrench, ratcheting wrench or regular wrench. Ideal for removing stripped, rusted or broken studs. The impact wrench can be inserted directly into the stud extractor. Fits 3/8″ impact wrench or ratcheting wrench. The stud extractor is adjustable to fit studs that are anywhere from 1/4″ to 1/2″ (6-12mm).

 

50mm Damaged Screw Remover Set – Easy Broken Bolt Stud Extractor - Overview remove damaged screws without damaging surrounding material fit the damaged screw remover into drill, engage with screw and switch drill to reverse for easy removal of damaged screws overall length 50mm.

 

Stanley Proto Facom FA-287B.6 1/2-Inch Drive Stud Extractor Internal Cam/Roller Type M6 - Capacity ranging from 6-16mm. 6 facom 1/2-inch drive stud extractor internal cam/roller type m6 designed to grip studs using cam assemblies. 1/2-inch drive. 1/2-inch drive size. Stanley proto fa-287b. Full polish finish.

 

Stanley Proto Facom FA-287B.14 1/2-Inch Drive Stud Extractor Internal Cam/Roller Type M14 - 14 facom 1/2-inch drive stud extractor internal cam/roller type m14 designed to grip studs using cam assemblies. 1/2-inch drive size. Stanley proto fa-287b. 1/2-inch drive. Full polish finish. Capacity ranging from 6-16mm.

 

Walton 50210 10 Piece Pipe (NPT), Stud And Screw Extractor Set - The hardened steel fingers of walton tap extractors fit in the flutes of a broken tap to back it out simply and safely. They are available in every tap size, both inch and metric, as handy sets or individual pieces. During the past 100 years we have added to our original line of walton tap extractors, the “reps” line of pipe, stud & screw extractors and our tap extensions for both machine and hand tapping. This effective method has been used since 1908. Remove broken taps and save the threads walton tap extractors let you remove broken taps without drilling, lasers, damaged threads, scrapped parts or repair inserts. . Since 1908, the walton company has been the leading manufacturer of tap removal tools in the world. Our tap extractors will fit both nc and nf taps.

 

Stud Extractor Universal 1/2 Inch Drive - Easy removal of rusted, free-spinning screws and deck screwsmade of durable hardened steel. Easy to use, just two easy steps an essential part of every tool kit box. Our damaged screw remover set is backed by our highest quality promiseremoves any stripped screw in. The 4 piece screw extractor set works with any drill and any screw size or bolt,great for stripped,. Sold individually.

 

Stanley Proto Facom FA-287B.JS5 Stud Extractor Roller Set, 5-Piece - 2. 58-lbs weight. Stanley proto fa-287b. Js5 facom 5 piece stud extractor roller set 5 stud drivers for sizes m6, m7, m8, m9 and m10. Supplied in a cks rack.

 

Brand New Stud Extractor for 3/8″ Impact Wrench - Designed to grip studs using cam assemblies. 1/2-inch drive size. Full polish finish. Capacity ranging from 6-16mm. 1/2-inch drive.

 

Pipe & Stud Extractors #9, For Broken Pipe: 2″, For Broken Stud: 3″ or 3-1/2″ - Fits 1/4″ to 1/2″ (6, 12mm) studs impact gun compatible ideal for removing stripped, rusted, broken or smooth studs hex drive can be a driver with a wrench, ratchet, or impact tool. Shallow grip, which lessens expansion and jamming. Instant release from bite after job is completed. Four-point grip, which assures strong bite. Each set is furnished in a sturdy plastic case.

 

Universal 3/8″ Drive Dr Broken Thread Stud Extractor Tool Socket Remover Removal - Fits 1/4″ to 1/2″ (6, 12mm) studs impact gun compatible ideal for removing stripped, rusted, broken or smooth studs hex drive can be a driver with a wrench, ratchet, or impact tool. Universal 3/8″ drive dr broken thread stud extractor tool socket remover removal#0010/103. Instant release from bite after job is completed. Shallow grip, which lessens expansion and jamming. Four-point grip, which assures strong bite.

 

Stanley Proto Facom FA-287B.12 1/2-Inch Drive Stud Extractor Internal Cam/Roller Type M12 - Full polish finish. 1/2-inch drive size. Stanley proto fa-287b. Capacity ranging from 6-16mm. 12 facom 1/2-inch drive stud extractor internal cam/roller type m12 designed to grip studs using cam assemblies. 1/2-inch drive.

 

5 PIECE GO-THRU STUD EXTRACTOR RATCHET SOCKET SET by NEILSEN TOOLS - 5 piece go-thru stud extractor ratchet socket set. 1 pack/s.

 

Irwin Bolt Grip / Stud Extractors Base Set TE082 - Capacity ranging from 6-16mm. Price for each item stud extractor type internal cam/roller size 16mm drive size (in) 1/2 overall length (in) 2-15/16 application designed to grip studs using cam assemblies for removing studs, bolts, screws up to 5/8″ material steel features full polish country of origin (subject to change) japan. 1/2-inch drive. 1/2-inch drive size. Full polish finish.

 

Pipe & Stud Extractors #6, For Broken Pipe: 1″, For Broken Stud: 1-1/2″ or 1-3/4″ - Features four-point grip, which assures strong bite shallow grip, which lessens expansion and jamming instant release from bite after job is complete rust-resistant black oxide finish. These standard extractors are for right-hand pipe and studs. With these extractors on hand, you are assured that expensive machinery will not be damaged by makeshift methods of removing broken pipes and studs. They are available for left-hand tread at no extra charge. Please inquire. These extractors work by pulling, rather than reaming, and are designed for strength, durability and easy handling.

 

Stud Extractor - Shallow grip, which lessens expansion and jamming. Each set is furnished in a sturdy plastic case. Instant release from bite after job is completed. Four-point grip, which assures strong bite. Fits 1/4″ to 1/2″ (6, 12mm) studs impact gun compatible ideal for removing stripped, rusted, broken or smooth studs hex drive can be a driver with a wrench, ratchet, or impact tool.

 

Damaged Bolt and Stud Extractor Tool| ARES 70016 | Grips & Removes 1/4″ to 1/2″ Studs, Ideal for Broken, Rounded Off, Painted Over & Rusted Tight Bolts - The tool this tool is 3/8″ drive and can be used with hand ratchets, impact wrenches and air ratchets the hexagonal flat can be used with flat wrenches, adjustable wrenches, sockets, and locking pliers compact design allows access into small areas, where studs may be hard to reach manufactured with high-grade, heat-treated alloy steel for maximum durability and chrome finish for additional rust protection, aesthetic appeal. Aspca business ambassador we are proud to be part of the aspca business ambassador program if you have a pet, you realize they are more than a pet, they are part of the family with your support, we’re proud to help this great organization. Multiple uses broken exhaust manifolds, oil filler plugs, rounded starter bolt, low grade bolts left in saltwaterthis tool can tackle them all and more this tool will save hours of frustration on broken, rounded, painted over and rusted tight bolts. Reliable | effective | efficient users trust ares to be quality tools you are backed by our performance assurance if you have any issues with your ares stud extractor, simply contact customer service for troubleshooting help, parts, replacement, or refund. Traditonal bolt extractors traditional bolt extractors force the user to guess which size the damaged stud is they have a tendency to strip the screw even more and shave metal off without budging the screw, leaving you worse off than when you started the universal design of this tool allows you to clamp down on the damaged stud, eliminating the guess work on a rusted or broken stud.

 

Stud Extractor Roller Remover Bolt Removal Socket 4pcs Metric or Imperial TE254 by A B Tools - Stud extractor roller remover bolt removal socket 4pcs metric or imperial te254. 3 cam lock system grips securely, won’t bind. 4 hardened teeth with black oxide finish. 1 use with 1/2″ drive ratchet or 1/2 drive extention capacity 6-19mm (1/4″-3/4″).

 

Facom Socket Type Extractors – stud extractor 16mm roller - Capacity ranging from 6-16mm. Full polish finish. 1/2-inch drive size. 1/2-inch drive. Price for each item stud extractor type internal cam/roller size 16mm drive size (in) 1/2 overall length (in) 2-15/16 application designed to grip studs using cam assemblies for removing studs, bolts, screws up to 5/8″ material steel features full polish country of origin (subject to change) japan.

 

Stud Extractor (Pack of 2) - 3 cam lock system grips securely, won’t bind. 2 removes studs, rounded nuts or bolts. 1 use with 1/2″ drive ratchet or 1/2 drive extention capacity 6-19mm (1/4″-3/4″). 4 hardened teeth with black oxide finish.

 

K-D Tools 1708 Stud Extractor - Drive socket will not bind. Note kd tools brand is superseded to gearwrench gearwrench 1708 cam style stud extractor 1/4″ to 3/4″. Featurestool removes 1/4″ (6mm) to 3/4″ (19mm) studs. Cam wheel grips within 9/32″ of flat surface to hold stud.

 

Pipe & Stud Extractors #4, For Broken Pipe: 1/2″ - Spiral cut teeth provide positive grip, remove circular or damaged bolts. Can be driven with a metric spanner or socket. Remove the nut is ten sets of different sizes suitable for damaged, rusted nut bolt, this is taken as unscrew screws, nuts and the most important conducting stabilization tool. 10pcs damaged nuts and bolts extractors.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.