25 Most Wanted Benders

 

RIDGID 38048 Model 608 Heavy-Duty Pipe Bender, 1/2-inch Tubing Bender - Tube bender has a 1/2-inch outer diameter capacity and 1-1/2-inch bend radius. Delivers high-quality bending performance for stainless steel and other hard tubing like steel and titanium. Extra-long 16-inch (40 cm) handles increase leverage and roll dies in the bending form reduce force needed. Vise clamp built into bending form provides extra stability. 2-stage design allows for in-place bending from 90 degrees to 180 degrees without ever crossing handles.

 

Gardner Bender PS-175ZN Plastic Staple, 3/4 in., 14/3, 12/3, 10/3 (NM) Cable, White - Uv-resistant polyethylene saddles will not rust, rot or deteriorate. Superior quality at an affordable price. Easy to use. The product is manufactured in united states. The product is 100pk 3/4 pals staple. Smooth saddles prevent damage to insulation.

 

Gardner Bender LTW-400 Liquid Tape, 4-Ounce, White - A liquid coating used to insulate and protect electrical splices and connections. Liquid electrical tape. Superior quality at an affordable price. Great for home, auto/marine and electrical applications indoor/outdoor. Rubber based coating will not harden. Indoor/outdoor use.

 

Spring Tube Bender Kit 1/4″ 5/16″ 3/8″ 1/2″ & 5/8″ - Tubing benders bends brass, aluminum, and copper tubes without crimping. Spring tube bender kit. They support the tube and create a kink less bend. Spring tubing benders are a simple and effective way of bending a/c tubing without crimping or collapsing the pipe. This set is capable of making bends up to 180 degrees. In diameter each pack contains five spring tube benders. The length of the each spring is 8 inches. The tubing benders are made from hardened and tempered spring steel with a zinc-plated finish. The benders handle tube sizes up to 5/8 in.

 

Greenlee 841AH Site Rite Aluminum Hand Bender With Handle For 3/4″ EMT, 1/2″ Rigid/IMC - The aluminum and iron 1/2″, 3/4″ and 1″ bender heads all have enlarged foot pedals and increased toe room to ensure greater control, stability and leverage. Capacity 3/4″ emt, 1/2″ rigid/imc. Greenlee lifetime limited warranty. A strong stable square hook design. All the bender handles are a consistent diameter, offering a bigger grip area, while still straight up and down for fast 30 degree bends.

 

QLT By MARSHALLTOWN 14739 Rebar Bender - Has 5/8″ capacity and is 34″ in length. Resists deterioration from uv rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 pvc, copper tubing, etc. 10 per bag. 1-inch.

 

Shop Tuff MR-01 Mighty Rod Bender - Bends 3/16″, 1/4″, 3/8″, 5/8″, and 3/4″ radius. Installs on any vise and also could and beds a variety of wires. Forms round, square, and flat stock. Includes dies for 1/2, 3/4, 1, 1-1/4, 1-1/2″ diameter bends. Handles up to 3/8″ solid material. Shapes hooks, “s” loops and others.

 

hilmor 1926598 Compact Bender Kit with Reverse Bending Attachment - A universal crossbar and color-coded mandrels provide simple setup and easy size identification. An advanced mandrel design and quick-release mechanism allow for an easy tube release. Big on advantages. Small-space capabilities, one-handed operation and precise bends, you get it all. Small in size. You can count on precise bends of 1/4″, 5/16″, 3/8″, 1/2″, 5/8″, 3/4″ and 7/8″ tubing up to 90degree or 7/8″ mandrels. The hilmor compact bender will help you get the job done right, from start to finish.

 

Gardner Bender PS-150 Plastic Staple, 1/2 in., 14/2, 12/2, 10/2 (NM) Cable, White - Superior quality at an affordable price. Smooth saddles prevent damage to insulation. Uv-resistant polyethylene saddles will not rust, rot or deteriorate.

 

Gardner Bender 10-113 Terminal Spade, 16-14 AWG, Stud Sz 4-6, Blue (100 pk) - Rated at 600 volt max. Temperature rating 167 °f (75 °c). Color-coded by wire gauge size. Quick and reliable crimp-type wire connections. . Available in a variety of packaging options and stud sizes.

 

Gardner Bender GVD-3504 Circut Alert Non-Contact Voltage Tester, Indicates AC Voltage 50-600V, Patented, CUL, ETL Listed - Tester is c/etl/ul listed and offers cat iii rating with a 1 year warranty. Use this tester to check for “hot” wires before you begin electrical work. Fully insulated probe tip eliminates the risk of contacting live electrical wires. Beeps and flashes to indicate the presence of ac voltage from 50v to 600v. Built in safe test indicates tester and batteries are working properly.

 

Gardner Bender MPS-2125 CableBoss Staple, 1/2 in., Black - For use with msg-501 staple gun black 1/2 inch. Large wire and cable insulated staple black 1/2 in. Superior quality at an affordable price. Barbed leg design for superior holding power. This is manufactured in united states. Cable boss staples.

 

TEKTON 6519 Three-Size Tubing Bender - Three-channel design accommodates 1/4, 5/16, and 3/8 in od tubing. And since it’s tekton, it’s always guaranteed, so go ahead, take it on. Smoothly bends copper, brass, aluminum, and thin-wall steel without crimping tubing. Calibrated to bend tubing to angles up to 180 degrees. Rugged aluminum alloy construction with durable, baked enamel finish.

 

Flexzion Manual Tube Bender Tool 1/2″ Thickness OD Steel Tubing for HVAC Refrigeration Soft Copper Brass Aluminum other Soft Metals Bends with Wide Hook Grips Securely - Bends most 1/2″ od steel hydraulic tubing of soft copper, aluminum, brass, steel and other metal tubing. Ergonomical wide hook grips tubing securely 1-1/2″ bend radius. Open side design slips over tube at any point less effort to make fast, accurate bends. 90 degree start requires much less effort to make fast and accurate bends. Calibrated markings show angle of bend for smooth, short radius bends up to 180 degree.

 

Klein Tools 56206 1/2-Inch EMT Assembled Aluminum Conduit Bender with No.51247 Handle - Benfield head design accurately and repeatedly performs common bends such as stub ups, offsets, back-to-back and saddle bends. Efficient structural geometry eliminates excess material and unnecessary weight. Lightweight die-cast aluminum construction. Wide foot pedal provides excellent stability and features angled grooves for extra traction. Bold cast-in benchmark symbols, degree scales and multiplier scales help save time on the job.

 

Gardner Bender 46-308UVBFZ GB Xtreme Temp Cold Weather Cable Tie Performs from -40 to 185-Degree F with 50-Pound Tensile Strength, 8-Inch, Black, 100-Pack - Designed to perform under intense uv and cold weather conditions, your project stays securely bundled no mater what mother nature brings. Made in the usa. Engineered from improved nylon 66 and iso certified to maintain their properties down to -40⁰ f/c. 8 inch length w/ 50 lb tensile strength. Ul listed for indoor and outdoor applications from -4⁰ f to 185⁰ f (-20⁰ c, 85⁰ c).

 

Stanley 93-310 5/8-Inch Board Bender - Designed for strength and durability. Carbon steel construction. 5/8-inch bar. Cushioned handle designed for kneeling holds pressure for hands-free use. Board bender ideal for straightening deck and joist boards quickly and easily.

 

Gardner Bender LNW-500 Locknut Wrench, 1/2 in. Black - Available in three different sizes to fit every application 1/2 inch, 3/4 inch, and 1 inch. Etched markings allow for easy identification clearly marked tighten and loosen ends make usage a breeze. Locknut wrench solves the problem of tight spaces and fits the majority of ul locknuts. Hooked tip latches onto locknut and maximizes turning leverage. Thin design allows easy maneuvering in tight locations while durable steel construction makes it strong enough to get the job done.

 

Gardner Bender 931B Aluminum Hand Bender, 3/4 in. EMT & 1/2 in. Rigid - Industry-standard markings- 30° bend when handle is straight up. Vise-mate holds conduit while cutting or reaming. Embossed sight lines for 10°, 22°, 30°, 45°, 60° and 90°. Bends 1/2″ to 1-1/4″ emt, and 1/2″ to 1″ rigid and rigid aluminum conduit. Built-in acrylic level gauge helps make precise bends in half the time.

 

Aluminum Die Cast Conduit Bender, 6 Degree Inside Radius, For 3/4″ EMT or 1/2″ Rigid - Conduit bender is for 3/4-inches electrical metallic tubing (emt) or 1/2-inches rigid. Conduit bender have cast in-angle indicators with raised bending points of reference to aid the installer. 6 degree inside radius. The bodies are aluminum die cast which are lightweight yet strong enough for everyday use.

 

Gardner Bender CTT-45 Cable Tie Tensioning Tool - The product is cable tie tension tool. Easy and simple use kit. Lightweight, economical. Use for all cable ties up to 75 lbs. The product is manufactured in china. Quick twist snaps off excess length.

 

Gardner Bender 10-084 WingGard Twist-On Wire Connector, 22-10 AWG, Yellow - Unsurpassed quality and durability in a high-leverage, easy-on wing-type design. Easily removed for repeat usage on same size combination or larger. Wings are knurled for a sure grip and offset from centerline for greater twisting leverage. Rated at 600v max in building wire and at 1000v max in lighting, fixtures/luminaries and signs. The expandable square-wire plated spring instantly adjusts to the shape and size of the splice, then bites down to thread onto the wires without ratcheting and creates a strong, vibration-resistant connection-no pre-twisting tools are necessary. Flame-retardant properties resist heat distortion up to 105 degrees celsius/221 degrees fahrenheit. Secure connections mean positive continuity. Square-wire zinc-plated spring instantly adjusts to the shape and size of the splice. Wing-gard finger-pleasing wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. High-dielectric shell features deep skirt design to prevent exposure of bare wire.

 

Shop Tuff MB-18 18-Inch Sheet Metal Bender, Grey - Made in usa from 3/16-inch extruded aluminum. Clean, smooth bends up to 90 degrees. Bends and forms up to 18 gauge sheet metal and 16 gauge aluminum up to 18-inches wide. Mounting holes in base for stationary or portable applications. 8-inch bending handles with knobs provide additional leverage for easy bending.

 

Gardner Bender DS-110N Duct Seal, 1 lb. Pug - The product is manufactured in china. Malleable non-conductive compound for sealing of electrical raceway connections from air, noise and moisture. Gardner bender duct seal. Patented design and high-quality construction. The product is duct seal lb comp plug. Easy and simple use kit.

 

Gardner Bender 10-107 Terminal Ring, 12-10 AWG, Stud Sz 12-1/4, Yellow (50 pk) - Gardner bender ring terminals- vinyl-insulated barrel. Temperature rating 167 °f (75 °c). Rated at 600 volt max.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.